Kenmore 2631633

Kenmore Elite 6.2 cu. ft. Top Load Washer

Model: 2631633 - Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Kenmore Elite 6.2 cu. ft. Top Load Washer, Model 2631633. Please read all instructions carefully before using the appliance to ensure proper installation, usage, and maintenance. Retain this manual for future reference.

Front view of the Kenmore Elite 6.2 cu. ft. Top Load Washer in metallic finish.

Figure 1: Front view of the Kenmore Elite 6.2 cu. ft. Top Load Washer.

2. Safety Information

Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury to persons.

  • Read all instructions before using the washer.
  • Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances.
  • Do not allow children to play on or in the appliance. Close supervision is necessary when the appliance is used near children.
  • Do not reach into the appliance if the tub or agitator is moving.
  • Do not install or store this appliance where it will be exposed to the weather.
  • Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this manual.

3. Setup and Installation

Proper installation is crucial for the performance and longevity of your washer. Ensure the appliance is installed on a level surface and connected to appropriate water and power sources.

3.1 Unpacking

  • Remove all packaging materials, including the shipping base and internal packing.
  • Inspect the washer for any shipping damage.

3.2 Location Requirements

Place the washer in a location with adequate space. The dimensions of the unit are approximately 30 inches (Length) x 29.5 inches (Width) x 43.5 inches (Height). Ensure there is sufficient clearance for the lid to open fully (Height with lid open: 61.2 inches).

Side view of the Kenmore Elite Top Load Washer, showing its depth.

Figure 2: Side view of the washer, illustrating its depth.

3.3 Water and Drain Connections

  • Connect the hot and cold water inlet hoses to the corresponding valves. Ensure connections are tight to prevent leaks.
  • Secure the drain hose to a standpipe or laundry tub, ensuring it is properly routed to prevent kinks.
Rear view of the Kenmore Elite Top Load Washer, showing water inlet connections and power cord.

Figure 3: Rear view of the washer, highlighting water and power connections.

3.4 Electrical Connection

Plug the washer into a grounded 3-prong outlet. Do not remove the grounding prong or use an adapter.

4. Operating Instructions

Your Kenmore Elite washer features a 6.2 cubic foot capacity, capable of cleaning up to 32 large towels in a single load. It utilizes a Quad Action Impeller with 4 wash actions and Accela Wash Technology for efficient cleaning.

Close-up of the Kenmore Elite washer's control panel with various cycle and option selections.

Figure 4: Washer control panel.

4.1 Loading the Washer

  • Distribute clothes evenly around the wash plate (impeller).
  • Do not overload the machine. Overloading can reduce cleaning performance and cause imbalance.
Top-down view into the washer drum, showing the Quad Action Impeller at the bottom.

Figure 5: Inside the washer drum with the Quad Action Impeller.

4.2 Detergent and Additives

  • Use only High-Efficiency (HE) detergent.
  • For liquid HE detergent, fill to the first line of the cap.
  • If using HE powder detergent or pods, add them to the tub before adding clothes to ensure proper dissolution.
  • Add fabric softener to the designated dispenser.

4.3 Cycle Selection

Turn the cycle selector knob to choose the desired wash cycle. Available cycles include:

  • Normal/Casual: For everyday loads.
  • Heavy Duty: For heavily soiled or sturdy items.
  • Bulky/Bedding: For large items like blankets and comforters.
  • Whites: Optimized for white fabrics.
  • Sanitize w/Oxi & Steam: Provides enhanced cleaning and sanitization.
  • Cold Clean: For energy-efficient washing with cold water.
  • Delicates: For fragile items.
  • Express: For small, lightly soiled loads that need quick washing.
  • Rinse & Spin: For rinsing and spinning items without a full wash cycle.
  • Clean Washer: For maintaining the washer's cleanliness.
Detailed view of the Kenmore Elite washer's control panel, showing cycle options and settings.

Figure 6: Detailed view of the control panel.

4.4 Wash Options

Customize your wash with these options:

  • Deep Fill: Adds more water to the wash cycle. Useful for larger loads or when more water is desired.
  • Soil Level: Adjusts wash intensity (Light, Normal, Heavy, Ex Heavy).
  • Wash Temp: Selects water temperature (Cold, Cool, Warm, Hot). Note: Detergent requires approximately 60-degree water to dissolve effectively; avoid 'tap cold' for optimal dissolution.
  • Spin Speed: Adjusts spin intensity (No Spin, Low, Med, High).
  • Extra Rinse: Adds an additional rinse cycle.
  • Delay Start: Delays the start of the wash cycle.
  • Lid Locked: Indicates when the lid is locked during operation.

4.5 Addressing White Residue

If you experience white residue on clothes, consider the following:

  • Ensure you are using liquid HE detergent to the first line of the cap.
  • If using HE powder detergent or pods, add them to the tub before clothes to allow proper dissolution.
  • Avoid overloading the machine.
  • Use cycles other than "Normal" or "Express" for certain loads, such as "Heavy Duty" or "Bulky."
  • Utilize the "Deep Fill" option or "Fabric Softener" option to add more water to the cycle.
  • Use warmer water temperatures (not "tap cold") as detergent requires approximately 60-degree water to dissolve.
  • Add up to 2 extra rinses.
  • Perform a "Clean Washer" cycle if the washer is not new or has not been cleaned recently.

5. Maintenance

Regular maintenance helps ensure optimal performance and extends the life of your washer.

5.1 Cleaning the Washer

  • Run the "Clean Washer" cycle periodically to remove detergent residue and odors.
  • Wipe down the exterior with a soft, damp cloth.
  • Clean the dispenser drawers regularly to prevent buildup.

5.2 Water Inlet Filters

Periodically check and clean the water inlet filters to prevent blockages that can affect water flow.

6. Troubleshooting

Refer to this section for common issues and their solutions.

ProblemPossible CauseSolution
Washer does not startPower cord unplugged, lid not closed, circuit breaker trippedEnsure power cord is securely plugged in. Close the lid completely. Check and reset the circuit breaker.
Excessive vibration/noiseWasher not level, load unbalanced, shipping bolts not removedAdjust leveling feet. Redistribute laundry in the tub. Ensure all shipping bolts are removed.
Water not filling or drainingWater supply turned off, hoses kinked, drain hose cloggedCheck water supply valves. Straighten hoses. Clear any clogs in the drain hose.
White residue on clothesDetergent not dissolving, overloading, insufficient waterRefer to section 4.5 for detailed solutions.

7. Specifications

Technical details for the Kenmore Elite 6.2 cu. ft. Top Load Washer, Model 2631633.

  • Model Number: 2631633
  • Capacity: 6.2 cubic feet
  • Product Dimensions (L x W x H): 30 x 29.5 x 43.5 inches
  • Item Weight: 187 Pounds
  • Color: Metallic
  • Material: Stainless Steel (drum)
  • Access Location: Top Load
  • Special Feature: Energy Star certified
  • Controls Type: Push Button
  • Manufacturer: Kenmore
Image displaying detailed product dimensions for the Kenmore Elite washer.

Figure 7: Product Dimensions.

Energy Star certification logo, indicating energy efficiency.

Figure 8: Energy Star Certified.

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official Kenmore website. Keep your purchase receipt for warranty claims.

What's in the Box: Washing Machine

Related Documents - 2631633

Preview Kenmore Elite Top-Loading High Efficiency Low-Water Washer: Use & Care Guide
This guide provides essential information for operating, maintaining, and troubleshooting your Kenmore Elite 110.31642 and 110.31643 top-loading high-efficiency low-water washing machine. Learn about features, cycles, and care instructions.
Preview Kenmore Elite 796.4127# Front-Loading Automatic Washer Use & Care Guide
Comprehensive Use & Care Guide for the Kenmore Elite 796.4127# Front-Loading Automatic Washer, covering installation, operation, maintenance, troubleshooting, and warranty information.
Preview Kenmore 40512 Owner's Manual and Use & Care Guide
Comprehensive Owner's Manual and Use & Care Guide for the Kenmore Elite 796.4051# front-loading automatic washer. Covers installation, operation, maintenance, troubleshooting, and warranty details. Provided by Sears.
Preview Kenmore 41022 Elite Front-Loading Washer: Owner's Manual & Use and Care Guide
Detailed owner's manual and use & care guide for the Kenmore 41022 Elite front-loading automatic washer. Includes installation, operation, maintenance, troubleshooting, and warranty information.
Preview Kenmore Elite Top-Loading Automatic Washer Use & Care Guide
Comprehensive Use & Care Guide for the Kenmore Elite Top-Loading Automatic Washer (Model 796.3152#21#). Includes safety instructions, installation, operation, maintenance, troubleshooting, and warranty information.
Preview Kenmore Top Load Washer with Impeller - 5.3 cu ft Dimension Guide
Detailed planning dimensions and installation clearances for the Kenmore Top Load Washer with Impeller, model 2631652N, featuring 5.3 cu ft DOE (US) and 6.1 cu ft IEC (CAN) capacities. Includes electrical requirements and spacing recommendations for installation.