KAWADA nanoblock NBC234 Christmas Santa Claus with Reindeer Building Set

1. Introduction

This manual provides detailed instructions for assembling and maintaining your nanoblock NBC234 Christmas Santa Claus with Reindeer building set. nanoblock sets feature micro-sized building blocks, allowing for intricate and detailed models. Please read all instructions carefully before beginning assembly.

2. Safety Information

• Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Keep all blocks and packaging away from infants and young children to prevent accidental ingestion.
• Adult Supervision: Adult supervision is recommended during assembly, especially for younger users.
• Proper Disposal: Dispose of all packaging materials responsibly.

3. Package Contents

Verify that all components are present before starting assembly. Your nanoblock NBC234 set should include:

• Approximately 180 micro-sized building blocks.
• One instruction sheet with detailed assembly steps.

Image of the nanoblock NBC234 Christmas Santa Claus with Reindeer building set packaging, showing the assembled model and block count. The packaging indicates "180 PCS" and "NBC_234".

4. Assembly Instructions (Setup)

Follow the step-by-step instructions provided on the included instruction sheet. Due to the micro size of the blocks, precision and patience are key.

1. Unpack: Carefully open the packaging and lay out all the blocks. It may be helpful to sort blocks by color or shape.
2. Consult Instructions: Refer to the instruction sheet for the exact sequence of block placement. Each step will show which blocks to use and where to place them.
3. Assemble: Connect the blocks firmly. The small size requires careful handling. Use tweezers if necessary for very small pieces or tight spaces (tweezers not included).
4. Verify: Double-check each step against the instruction sheet to ensure correct assembly.

The completed model will feature Santa Claus and a Reindeer, as depicted on the product packaging.

5. Displaying Your Model (Operating)

Once assembled, your nanoblock model is ready for display. Place it on a stable, flat surface where it can be admired. Avoid areas prone to vibrations or direct sunlight to preserve the blocks' color and connections.

6. Maintenance

• Cleaning: To clean your nanoblock model, gently wipe it with a dry, soft cloth. For stubborn dust, a soft brush or compressed air can be used. Avoid using harsh chemicals or abrasive materials.
• Storage: If disassembling for storage, keep all blocks in a sealed container to prevent loss of small pieces.

7. Troubleshooting

• Missing Pieces: If you find any pieces missing, first re-check the packaging and your work area thoroughly. If pieces are still missing, contact KAWADA customer support for assistance.
• Difficulty Assembling: Ensure you are following the instruction sheet precisely. The small size of nanoblocks requires careful alignment. If a piece doesn't fit, do not force it; re-examine the previous steps.

8. Specifications

9. Warranty and Support

For warranty information and customer support regarding your nanoblock product, please refer to the official KAWADA website or contact their customer service directly. Specific warranty terms may vary by region and retailer.