Vacmaster Professional Beast Series 16 Gallon Wet/Dry Vac

Introduction

The Vacmaster Professional Beast Series 16 Gallon Wet/Dry Vac is a powerful and versatile cleaning tool designed for both wet and dry applications. Featuring a 6.5 peak horsepower motor, this unit delivers strong suction for various tasks, from workshop debris to garage spills. Its robust design and integrated features ensure efficient and convenient operation.

Image: The Vacmaster Professional Beast Series 16 Gallon Wet/Dry Vac, showcasing its black and yellow design with the hose wrapped around the top.

Important Safety Information

Always read and understand all instructions before using this wet/dry vacuum. Failure to follow these instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

• Do not leave the appliance when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Use extra care when cleaning on stairs.
• Do not use without filters in place.
• Always turn off the appliance before connecting or disconnecting hose.

What's Included

Your Vacmaster Professional Beast Series Wet/Dry Vac comes with a comprehensive set of accessories to handle various cleaning tasks. These include:

• 7 ft. x 2-1/2 in. Kink-Resistant Premium Hose
• 2 Extension Wands
• Crevice Tool
• Utility Nozzle
• Air and Noise Diffuser
• Floor Nozzle
• Fine Dust Cartridge Filter
• Foam Wet Filter

Image: A visual representation of the included accessories: hose, extension wands, crevice tool, utility nozzle, air and noise diffuser, floor nozzle, fine dust cartridge filter, and foam wet filter.

Setup

Follow these steps to assemble your wet/dry vacuum:

1. Unpacking: Remove all contents from the packaging. Ensure all listed accessories are present.
2. Caster Assembly: Attach the four casters to the base of the vacuum. Push firmly until they click into place.
3. Hose Connection: Insert the large end of the hose into the vacuum port on the front of the tank. Twist to secure.
4. Accessory Storage: Utilize the on-board storage slots for the extension wands and nozzles for convenient access.
5. Power Cord Management: Wrap the power cord around the integrated cord wraps on the power head for neat storage.

Video: A demonstration of the easy assembly process for the Vacmaster Beast Series wet/dry vacuum, including attaching the hose and accessories.

Operating Instructions

Dry Vacuuming

For dry pickup, ensure the cartridge filter is properly installed. Attach the desired nozzle or extension wand to the hose. Plug the power cord into a suitable outlet and press the large dust-sealed ON/OFF switch to activate the vacuum. The powerful 6.5 HP motor provides strong suction for various dry debris.

Wet Vacuuming

Before wet pickup, remove the cartridge filter and install the foam wet filter. Attach the appropriate wet pickup tool. Ensure the drain port is securely closed. After use, open the large drain port at the bottom of the tank to quickly empty liquids.

Image: Close-up view of the large drain port at the base of the Vacmaster Wet/Dry Vac, showing water being drained from the tank.

Blower Function

To use the blower function, detach the hose from the vacuum port and connect it to the blower port located on the rear of the power head. This allows you to clear sawdust, debris, or leaves from various surfaces with ease.

Video: A comprehensive review of the Vacmaster Pro Wet/Dry Vac, highlighting its features and demonstrating its use for both wet and dry applications, including the blower function.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Vacmaster Wet/Dry Vac.

Filter Cleaning and Replacement

The high-efficiency cartridge filter and dust bag capture fine dust particles down to 1 micron. For dry pickup, regularly clean the cartridge filter by tapping off excess dust or rinsing with water (allow to dry completely before re-installation). Replace the filter when suction power decreases significantly or if the filter is damaged. For wet pickup, use the foam wet filter and clean it by rinsing with water.

Image: A detailed view of the high-efficiency cartridge filter and dust bag, emphasizing their role in capturing fine dust particles.

Emptying the Tank

For dry debris, unlatch the power head and lift it off the tank. Dispose of collected debris. For liquids, use the large drain port at the bottom of the tank for quick and easy emptying.

Troubleshooting

Specifications

• Brand: Vacmaster
• Model Name: Vacmaster Beast Series
• Model Number: VJH1612PF0201
• Capacity: 16 Gallons
• Motor Horsepower: 6.5 Peak HP
• Hose Length: 7 Feet (2-1/2 inch diameter)
• Cord Length: 20 Feet
• Filter Type: Cartridge (High-Efficiency) and Foam Wet Filter
• Special Feature: High Power, Wet/Dry, Blower Function
• Product Dimensions: 19.8"L x 19.8"W x 23.8"H
• Item Weight: 29 pounds
• Noise Level: 69 Decibels
• Manufacturer: Cleva North America, Inc.

Image: An illustration detailing the product dimensions of the Vacmaster Wet/Dry Vac, showing its height, width, and length.

Warranty

This Vacmaster Professional Beast Series Wet/Dry Vac is covered by a 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included with your product or contact customer support.

Customer Support

For technical assistance, replacement parts, or warranty inquiries, please contact Vacmaster customer support:

• Website: Visit the official Vacmaster website for FAQs and support resources.
• Phone: Refer to your product packaging or the official website for the most current customer service contact number.