1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SC 2600 W Miter Saw. Please read all instructions carefully before using the tool to ensure proper function and user safety. Keep this manual for future reference.
2. Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating power tools. Failure to follow these instructions may result in serious injury.
- Read the Manual: Understand all instructions and warnings before operation.
- Wear Personal Protective Equipment (PPE): Always wear safety glasses, hearing protection, and a dust mask.
- Secure Workpiece: Ensure the material being cut is firmly clamped to prevent movement during operation.
- Maintain a Clean Work Area: Keep the work area free of clutter and well-lit.
- Avoid Hazardous Environments: Do not use power tools in damp or wet locations, or expose them to rain.
- Keep Children Away: Do not allow children or untrained persons to operate the saw.
- Inspect Tool Before Use: Check for damaged parts, misalignment, or any condition that may affect operation.
- Disconnect Power: Always disconnect the saw from the power source before making adjustments, changing accessories, or performing maintenance.
3. Product Overview
The Stayer SC 2600 W is a robust miter saw designed for precise cutting tasks. It features a powerful motor and durable construction for reliable performance.
Image 1: Stayer SC 2600 W Miter Saw. This image displays the overall structure of the miter saw, including the blade, motor housing, base, and safety guards.
Key Features:
- Powerful Motor: Equipped with a 1900W motor for efficient cutting.
- Blade Diameter: Designed for 260mm saw blades.
- Robust Construction: Features a solid 3.2 mm aluminum casting for durability and stability.
- Stable Base: Reinforced one-piece base construction for enhanced stability during operation.
- Miter Angle Adjustment: The base can be rotated left and right for precise miter cuts.
- Dust Extraction Ready: Designed for easy connection to a dust extraction system.
- Blade Type: Includes a Widia TCT Z-40 blade.
- Vertical Clamping: Features a vertical clamping mechanism to secure workpieces.
4. Setup
Before operating the miter saw, ensure it is properly set up and secured.
- Unpacking: Carefully remove all components from the packaging. Inspect for any damage that may have occurred during shipping.
- Mounting: Securely mount the miter saw to a stable workbench using appropriate bolts and fasteners. Ensure the workbench can support the weight and forces generated during operation.
- Blade Installation (if not pre-installed): Refer to the blade changing instructions in the Maintenance section. Ensure the blade is correctly oriented and tightened.
- Dust Extraction: Connect a suitable dust extraction system to the saw's dust port to minimize airborne dust and debris.
- Power Connection: Connect the saw to a grounded power outlet. Ensure the voltage matches the saw's requirements (230 Volts).
5. Operating Instructions
Follow these steps for safe and accurate cutting with your Stayer SC 2600 W Miter Saw.
Making a Cut:
- Adjust Miter Angle: Loosen the miter lock knob and rotate the turntable to the desired angle. Tighten the knob to secure the angle.
- Adjust Bevel Angle (if applicable): For bevel cuts, adjust the saw head to the required angle and lock it in place.
- Position Workpiece: Place the material firmly against the fence and the saw base.
- Secure Workpiece: Use the vertical clamp to firmly hold the workpiece in position.
- Start Saw: Press the power switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- Perform Cut: Slowly and steadily lower the saw blade through the workpiece. Do not force the cut.
- Complete Cut: Once the cut is complete, release the power switch and allow the blade to stop completely before raising the saw head.
- Remove Workpiece: Carefully remove the cut material.
Cutting Capacities:
The following table outlines the maximum cutting capacities for various cut types:
Image 2: Cutting Capacity Chart. This chart illustrates the maximum dimensions for different types of cuts (straight, miter, bevel, compound, and upper table) achievable with the Stayer SC 2600 W miter saw.
| Cut Type | Angle | Max. Dimensions (Length x Height) |
|---|---|---|
| Straight Cut | 90° | 155 x 25 mm, 65 x 77 mm |
| Miter Cut | 45°/90° | 103 x 30 mm, 55 x 77 mm |
| Bevel Cut | 90°/45° | 150 x 20 mm, 90 x 50 mm |
| Compound Cut | 45°/45° | 150 x 20 mm, 72 x 20 mm |
| Upper Table Cut | N/A | 0 - 42 mm |
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your miter saw.
- Cleaning: After each use, disconnect the power and clean the saw. Remove sawdust and debris from the motor vents, blade guard, and base using a brush or compressed air.
- Blade Replacement:
- Disconnect the saw from power.
- Raise the blade guard.
- Use the provided wrench to loosen the blade retaining bolt while holding the blade still.
- Remove the old blade and replace it with a new 260mm Widia TCT blade, ensuring the teeth are oriented correctly for cutting.
- Tighten the blade retaining bolt securely.
- Inspection: Periodically inspect the power cord for damage, check all fasteners for tightness, and ensure all moving parts operate smoothly.
- Lubrication: Apply a light coat of machine oil to pivot points and sliding mechanisms as needed.
7. Troubleshooting
Refer to this section for common issues and their potential solutions.
- Saw Does Not Start:
- Check if the power cord is securely plugged into a live outlet.
- Verify that the circuit breaker has not tripped.
- Ensure the safety switch or trigger lock is fully engaged.
- Blade Not Cutting Cleanly:
- The blade may be dull and require replacement.
- Ensure the blade is clean and free of resin buildup.
- Check that the workpiece is securely clamped.
- Excessive Vibration:
- Ensure the saw is securely mounted to the workbench.
- Check if the blade is properly installed and tightened.
- Inspect the blade for damage or warping.
- Motor Overheating:
- Ensure motor vents are clear of dust and debris.
- Avoid forcing the saw through material; let the blade do the work.
- Allow the saw to cool down if it feels excessively hot.
If problems persist, contact Stayer customer support or a qualified service technician.
8. Specifications
| Feature | Detail |
|---|---|
| Manufacturer | Stayer |
| Model Number | 1.1760 (SC 2600 W) |
| Product Dimensions | 470 x 26 x 3 cm |
| Item Weight | 15.5 Kilograms |
| Power Source | Mains Powered |
| Voltage | 230 Volts |
| Wattage | 1900 watts |
| Speed | 4700 RPM |
| Blade Type | Widia TCT Z-40 |
| Suitable for Materials | Aluminum, Wood |
| First Available Date | 21 April 2017 |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact Stayer customer service through their official website or the retailer where the product was purchased. Keep your proof of purchase for warranty claims.
10. Contact Information
For further assistance, please visit the official Stayer website or consult your local dealer.
