KINYO Wise-Calm Electric Breast Pump User Manual

1. Introduction

Thank you for choosing the KINYO Wise-Calm Electric Breast Pump. This device is designed to assist mothers in expressing breast milk efficiently and comfortably. Please read this manual thoroughly before first use to ensure proper operation, maintenance, and safety.

2. Important Safety Information

Always inspect all components before each use for any damage or wear. Discard and replace damaged parts immediately.
Ensure all parts that come into contact with breast milk are BPA-free. This product is made from Polypropylene (PP) and is BPA-free.
Do not immerse the main pump unit in water or other liquids.
This product is not dishwasher safe. Refer to the cleaning instructions for proper sterilization.
Keep the device out of reach of children.
Use only the provided power adapter or specified AA batteries (4x, not included).
Do not use while bathing or showering.
Consult a healthcare professional if you experience pain or discomfort during pumping.

3. Package Contents

Please check that all items listed below are present in your package:

Main Pump Unit: 1 piece
Milk Bottle (140ml/5.0oz): 1 piece
Milking Funnel: 1 piece
Massage Cushion: 1 piece
Dust Cap: 1 piece
Sealing Ring: 1 piece
Nipple: 1 piece
Nipple Cap: 1 piece
Sealing Cap: 1 piece
Bottle Holder: 1 piece
Silicone Air Tube: 2 pieces
Valve Base: 2 pieces
Membrane Valve: 4 pieces
Power Adapter Cable (1.5m): 1 piece
User Manual: 1 piece

KINYO Wise-Calm Electric Breast Pump package contents including main unit, assembled pump, and user manual — Figure 3.1: Overview of the KINYO Wise-Calm Electric Breast Pump package contents.

This image displays the main pump unit, the assembled breast pump with bottle and nipple, the silicone air tube, power adapter, and the user manual, representing the complete package contents.

4. Product Overview: Components and Controls

4.1 Component Identification

Exploded view of KINYO breast pump components with labels — Figure 4.1: Exploded view of the breast pump assembly, showing individual parts.

This diagram illustrates the individual components of the breast pump assembly, including the funnel cap, air cup, milking funnel, thick silica cushion, valve support, valve, non-slip bottle, and large deep bottle holder. Understanding each part is crucial for correct assembly and cleaning.

4.2 Control Panel

KINYO breast pump control panel with labeled buttons and LCD display — Figure 4.2: Detailed view of the main pump unit's control panel and LCD display.

The control panel features an LCD screen displaying massage grade, suction display, working time, and vacuum grade. Buttons include:

On/Pause Button: Powers the device on/off and pauses operation.
Massage Function Button: Activates the massage mode.
Vacuum Decrease Button (Down Arrow): Reduces suction intensity.
Vacuum Increase Button (Up Arrow): Increases suction intensity.

KINYO breast pump main unit and assembled pump with labels for features — Figure 4.3: Main unit and assembled pump highlighting key features.

This image provides an overview of the main pump unit and the assembled breast pump, pointing out features such as the large LCD display, soft silicone panel, stylish outlook, super air cup for vacuum, soft massage cushion, slim-waist bottle, and stable bottle holder. It also reiterates the control panel functions.

5. Setup and Assembly

Before first use, sterilize all parts that will come into contact with breast milk. Refer to the cleaning instructions in Section 7.

Assemble the Valve: Insert the membrane valve into the valve base.
Attach to Bottle: Screw the valve base with the membrane valve onto the milk bottle.
Connect Funnel: Attach the milking funnel to the valve base, ensuring a secure fit.
Place Cushion: Position the thick silica massage cushion inside the milking funnel.
Secure Air Cup: Place the air cup over the milking funnel.
Connect Tube: Attach one end of the silicone air tube to the air cup and the other end to the main pump unit's air inlet.
Power Connection: Connect the power adapter to the main pump unit and a power outlet, or insert 4 AA batteries into the battery compartment.

KINYO breast pump assembled and ready for use — Figure 5.1: Fully assembled KINYO Wise-Calm Electric Breast Pump.

This image shows the breast pump fully assembled, with the main unit connected via the air tube to the breast shield and milk bottle, which is placed in its yellow holder. This configuration is ready for operation.

KINYO breast pump with closed system air cup — Figure 5.2: Illustration of the closed system air cup preventing milk back-flow.

This image highlights the air cup component, emphasizing its role in creating a closed system. This design ensures that milk is separated from the air tube, preventing back-flow and maintaining hygiene.

6. Operating Instructions

Positioning: Sit comfortably and place the breast shield centrally over your nipple, ensuring a good seal against your breast.
Power On: Press the On/Pause button (⏻) to turn on the pump. The pump will automatically start in a gentle stimulation (massage) mode to encourage milk let-down.
Massage Mode: The massage function mimics a baby's natural sucking to stimulate milk flow. You can adjust the massage intensity if available, or it may transition automatically.
Expression Mode: After milk let-down begins (typically 1-2 minutes), the pump will transition to expression mode. You can manually switch to expression mode or adjust settings if needed.
Adjust Suction: Use the Vacuum Increase (▲) and Vacuum Decrease (▼) buttons to find a comfortable and effective suction level. The pump offers 9 levels of suction (170~340 mmHg, 23-45 Kpa).
Pumping Duration: Pump for approximately 15-20 minutes per breast, or until milk flow significantly slows.
Power Off: Press the On/Pause button (⏻) to turn off the pump.
Detaching: Gently break the seal between the breast shield and your breast before removing the pump.

Note: The KINYO Wise-Calm pump is designed for super silent operation, making it suitable for use at night or in quiet environments.

7. Cleaning and Maintenance

Proper cleaning and sterilization are essential for hygiene and product longevity.

7.1 After Each Use

Disassemble: Separate all parts that came into contact with breast milk (bottle, funnel, cushion, valves, air cup).
Rinse: Rinse all disassembled parts under cold running water to remove any milk residue.
Wash: Wash parts in warm, soapy water using a mild dish soap. Use a dedicated brush for breast pump parts.
Rinse Thoroughly: Rinse all parts thoroughly under clean running water to remove soap residue.
Sterilize: Sterilize parts by boiling them in water for 5 minutes, using a steam sterilizer, or a cold water sterilization solution.
Dry: Allow all parts to air dry completely on a clean drying rack or paper towel. Do not use a cloth towel as it may transfer lint.
Store: Store dry parts in a clean, covered container until next use.

Important: The main pump unit should never be washed or immersed in water. Wipe it clean with a damp cloth if necessary.

Note: This product is not dishwasher safe.

KINYO breast pump components for cleaning — Figure 7.1: Disassembled breast pump parts ready for cleaning.

This image shows the main components of the breast pump disassembled, including the breast shield, milk bottle, nipple, and bottle holder, indicating they are ready for individual cleaning and sterilization.

8. Troubleshooting

Problem	Possible Cause	Solution
No suction or weak suction	Improper assembly Damaged or worn membrane valve Air leak in the system Low battery power	Check all connections and ensure parts are assembled correctly. Inspect the membrane valve for tears or damage; replace if necessary. Ensure the breast shield forms a tight seal with your breast. Check air tube for cracks. Replace batteries or use the power adapter.
Pump not turning on	No power supply Batteries incorrectly inserted or depleted	Ensure the power adapter is securely plugged in. Check battery orientation and replace if depleted.
Milk flowing back into the tube	Improper assembly of the air cup/valve Damaged membrane valve	Ensure the air cup and membrane valve are correctly assembled and sealed. Inspect and replace the membrane valve if damaged.

9. Specifications

Model: Wise-Calm
Material: Polypropylene (PP), BPA-free
Color: Yellow
Main Pump Dimensions: 13 x 11 x 6 cm (approx.)
Milk Bottle Capacity: 140ml (5.0oz)
Power Input: AC100~240V, 50/60Hz, 0.3A
Power Output: DC6V, 0.8A
Battery Option: 4 x AA batteries (not included)
Suction Levels: 9 levels
Suction Range: 170~340 mmHg, 23-45 Kpa
Operating Mode: Electric, Automatic Massage Function
Noise Level: Super Silent

10. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

KINYO Wise-Calm