Brightech Leaf Pharmacy LED Floor Lamp (Model 211179AB) User Manual

1. Product Overview

The Brightech Leaf Pharmacy LED Floor Lamp is designed to provide focused, adjustable lighting for various tasks such as reading, sewing, and office work. It features an integrated LED light source with multiple brightness settings and a highly adjustable design for optimal light positioning.

Figure 1: Brightech Leaf Pharmacy LED Floor Lamp (Gold)

2. Setup and Assembly

The Brightech Leaf Pharmacy LED Floor Lamp is designed for straightforward assembly. Follow these steps to set up your lamp:

1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components are present according to the parts list (not provided in this manual, refer to packaging).
2. Assemble Pole Sections: Connect the pole sections by gently twisting them clockwise until secure. Ensure all connections are tight to prevent wobbling.
3. Attach Lamp Head: Secure the lamp head to the top pole section.
4. Connect to Base: Attach the assembled pole to the heavy weighted base. Tighten securely.
5. Plug In: Insert the power adapter into a standard electrical outlet.

Figure 2: Lamp components prior to assembly.

Figure 3: Visual guide for lamp assembly.

3. Operating Instructions

Your Brightech Leaf Pharmacy LED Floor Lamp offers versatile lighting control and positioning.

3.1 Power and Dimming

The lamp features an adjustable touch switch for power and brightness control.

• To Turn On/Off: Lightly tap the touch switch located on the lamp.
• To Adjust Brightness: Tap the switch repeatedly to cycle through the three brightness levels: 100%, 50%, and 25%.

Figure 4: Touch control for power and dimming.

3.2 Adjusting the Lamp Head and Arm

The lamp's head and swing arm are designed for easy rotation and adjustment to direct light precisely where needed.

• Swivel Arm: Gently pivot the arm horizontally to position the light over your desired area.
• Tilt Head: The lamp head can be tilted vertically to adjust the angle of illumination.

Figure 5: Adjustable swivel arm for precise light positioning.

4. Maintenance

To ensure the longevity and optimal performance of your lamp, follow these simple maintenance guidelines:

• Cleaning: Wipe the lamp with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
• LED Light Source: The lamp features an integrated LED light bulb designed to last approximately 20,000 hours and does not require replacement.
• Cord Care: Ensure the power cord is not pinched or placed under heavy objects.

5. Troubleshooting

If you encounter any issues with your Brightech Leaf Pharmacy LED Floor Lamp, refer to the following common troubleshooting steps:

• Lamp Not Turning On:
  • Ensure the power cord is securely plugged into a functional electrical outlet.
  • Check if the outlet is receiving power by plugging in another device.
  • Verify that the touch switch is being tapped correctly.
• Lamp Not Turning Off or Dimming Incorrectly:
  • Unplug the lamp from the power outlet for 30 seconds, then plug it back in to reset the internal controls.
  • Ensure the touch switch is clean and free from debris.
• Lamp Wobbles:
  • Ensure all pole sections and the base are securely tightened.
  • Verify the lamp is placed on a flat, stable surface.

If the issue persists after attempting these steps, please contact Brightech customer support.

6. Specifications

7. Warranty and Support

Brightech USA offers an industry-leading 3-year warranty covering defects, malfunctions, or sudden failures to your standing lamp when purchased through Brightech USA. Please retain your proof of purchase for warranty claims.

For further assistance or to make a warranty claim, please contact Brightech customer support through their official channels.