INALSA Steam Master 1700W Standing Garment Steamer Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe and efficient use of your INALSA Steam Master 1700W Standing Garment Steamer. Please read all instructions carefully before operation and retain this manual for future reference.

A full view of the INALSA Steam Master 1700W Standing Garment Steamer, featuring its purple and white base, adjustable pole, and steam nozzle.

2. Key Features

• Powerful Performance: 1700W power for efficient wrinkle removal and rapid heating (under 1 minute).
• Variable Steam Output: Continuous steam burst of 23g/min-40g/min for professional results on various fabrics.
• Fabric Brush: Detachable fabric brush included for thicker garments, ensuring enhanced steam penetration and a smoother finish.
• Large Nozzle: Big-sized steam nozzle designed for quick and effective results.
• Adjustable Pole & Hanger: Integrated adjustable pole for convenient garment hanging, collapsible for easy storage. Features a 360-degree folding swivel hanger.
• Safety Features: Equipped with Dry Boiling Protection and Over-Heat Protection, automatically switching off the heating element if the water tank is empty or overheats.
• User-Friendly Design: Power Indicator Light and a 1.5L detachable water tank facilitate easy operation and fewer refills.
• Protective Glove: Includes a hand glove for extra protection during steaming.

An infographic highlighting key features of the Steam Master: 1700 watts of power, boil dry protection, a 1.5-liter water tank, 45-second heat-up time, and variable steam output of 23-40 grams per minute.

Close-up of the 1.5-liter large capacity water tank, emphasizing that frequent refills are not needed.

An image detailing the sanitization benefits of the steamer, killing up to 99.99% of germs, and its suitability for various garments including blazers, ethnic wear, and baby clothes.

An image showcasing the three included accessories: a garment hanger, a hand glove for protection, and a fabric brush.

3. What's in the Box

• 1 x Main Steamer Unit
• 1 x Garment Hanger
• 1 x Fabric Brush
• 1 x Hand Glove
• Instruction Manual (this document)
• Warranty Card

4. Setup Instructions

1. Unpack Components: Carefully remove all parts from the packaging. Ensure all accessories are present.
2. Fill Water Tank: Remove the 1.5L detachable water tank. Fill it with distilled water up to the MAX line. Reattach the tank securely to the main unit.
3. Assemble Adjustable Pole: Insert the adjustable pole into the designated slot on the main unit. Secure it by twisting the locking mechanism.
4. Attach Garment Hanger: Adjust the pole to your desired height. Place the garment hanger onto the top of the adjustable pole.
5. Attach Hanger Clips (if applicable): Secure any additional hanger clips to the garment hanger as needed.
6. Connect Steam Nozzle: Firmly attach the steam nozzle hose to the main unit's steam outlet. Ensure it clicks into place.
7. Attach Fabric Brush (Optional): For thicker fabrics, attach the fabric brush to the steam nozzle.

5. Operating Instructions

1. Hang Garment: Place the garment you wish to steam on the hanger.
2. Plug In: Plug the steamer into a suitable power outlet (AC 230V). The power indicator light will illuminate.
3. Select Fabric Setting: Rotate the variable thermostat clockwise to select the appropriate fabric setting (e.g., Silk, Polyester, Cotton, Linen). The indicator light will show it's heating up.
4. Wait for Heat-Up: Allow approximately 45 seconds for the steamer to heat up. The indicator light may change or turn off when ready.
5. Begin Steaming: Hold the steam nozzle approximately 1-2 inches away from the fabric. Move the nozzle in a downward motion, allowing the steam to relax the fibers and remove wrinkles. Ensure the steam nozzle height is higher than the main unit to prevent water leakage.
6. Use Hand Glove: For added protection and to hold fabric taut, wear the provided hand glove.
7. Deodorize and Sanitize: The steam will also deodorize and sanitize clothes.
8. After Use: Once steaming is complete, turn the thermostat to the "OFF" position and unplug the appliance. Allow it to cool down before disassembling or storing.

A diagram illustrating three adjustable height levels for the steamer, with a note that the steam nozzle height should be higher than the main unit to prevent water leakage.

6. Maintenance and Care

• Empty Water Tank: After each use, always empty any remaining water from the tank to prevent mineral buildup.
• Clean Nozzle: Periodically clean the steam nozzle to remove any lint or residue.
• Descaling: If you notice reduced steam output or mineral deposits, descale the unit according to the instructions in the full product manual.
• Storage: Store the steamer in a cool, dry place. The collapsible pole allows for compact storage.

An image depicting the steamer in use, with clothes hanging on a rack, demonstrating its function as a hanging ironing machine.

A side-by-side comparison showing a wrinkled garment before steaming and the same garment smooth and wrinkle-free after using the INALSA Steam Master.

7. Troubleshooting

• No Steam: Ensure the water tank is filled, the unit is plugged in, and the thermostat is set to a fabric type. Allow sufficient heat-up time (approx. 45 seconds).
• Water Leakage: Ensure the steam nozzle is held higher than the main unit during operation. Check that all connections are secure.
• Reduced Steam Output: This may indicate mineral buildup. Consider descaling the unit.
• Appliance Not Turning On: Check power connection and ensure the power indicator light is on.

For further assistance, please refer to the full product manual or contact INALSA customer support.

8. Technical Specifications

9. Warranty and Support

The INALSA Steam Master Garment Steamer comes with a 2 Years Product Warranty from the date of purchase.

For warranty claims, service requests, or technical support, please contact INALSA customer service. Refer to your warranty card for detailed terms and conditions and the All India Service Centre List.