Introduction
This user manual provides detailed instructions for the Anderic RR7087TR thermostatic remote control, designed to replace original Hampton Bay and Harbor Breeze ceiling fan remotes. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance of your ceiling fan system.
The RR7087TR remote control is engineered to work seamlessly with compatible ceiling fan models, offering comprehensive control over fan speeds, lighting (with dimming), and temperature settings. It includes dedicated buttons for reverse, light delay, fan auto, and light timer functions.
Product Overview
Front view of the Anderic RR7087TR remote control, showcasing its ergonomic design, circular display for temperature and fan settings, and clearly labeled buttons for fan speed, light, reverse, and timer functions.
The Anderic RR7087TR remote control in use, demonstrating its compatibility and ease of operation with a ceiling fan. The image highlights the remote's sleek appearance and its function in a typical home environment.
Setup
What's Included
- Anderic RR7087TR Thermostatic Remote Control
- Wall Mount Bracket (with two screws for mounting)
Battery Installation
The remote control requires 4 AAA batteries (not included). To install:
- Open the battery compartment cover on the back of the remote.
- Insert 4 AAA batteries, ensuring correct polarity (+ and -).
- Close the battery compartment cover securely.
Dip-Switch Alignment
For the remote to communicate with your ceiling fan receiver, you must align its dip-switches to match the pattern of your existing ceiling fan receiver. This process ensures proper synchronization.
- Locate the dip-switches inside the battery compartment of the RR7087TR remote.
- Identify the dip-switches on your ceiling fan receiver (refer to your fan's manual if needed).
- Adjust the switches on the RR7087TR remote to exactly match the ON/OFF pattern of your ceiling fan receiver's dip-switches.
- Once matched, the remote should operate your fan without further programming.
Important Note:
- Warning: Make sure you are using Incandescent bulbs if you intend to use the dimming function. Other bulb types may not dim properly.
- Compatibility: This remote will not fully work for Windward III Fans (it will not control uplights). If your original Hampton Bay remote model is CHQ8BT7096T with a RED light button, this replacement remote will not control the lights.
Operating Instructions
The Anderic RR7087TR remote control provides comprehensive control over your ceiling fan and its integrated lighting. Below are the functions of each button:
| Button/Function | Description |
|---|---|
| Fan Off | Turns the ceiling fan off. |
| Fan Speed Low | Sets the fan speed to low. |
| Fan Speed Medium | Sets the fan speed to medium. |
| Fan Speed High | Sets the fan speed to high. |
| Down-lights (with dimming) | Controls the fan's down-lights. Press and hold to dim or brighten the lights. |
| Reverse | Changes the direction of the fan blades, useful for seasonal air circulation (clockwise for winter, counter-clockwise for summer). |
| Light Delay | Activates a delay before the lights turn off, allowing time to exit the room. |
| Fan Auto | Engages automatic fan operation, often based on temperature settings. |
| Light Timer | Sets a timer for the lights to turn off automatically after a specified duration. |
| Temp/Set Hour | Adjusts temperature settings or sets the hour for timer functions. |
The remote also features a thermostatic display, allowing you to monitor and adjust room temperature settings for optimal comfort when using the Fan Auto function.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the remote's performance diminishes or the display becomes dim. Always replace all batteries at the same time with new ones of the same type.
- Storage: If storing the remote for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Remote not operating fan/light. |
|
| Lights not dimming properly. |
|
| Reverse function not working. |
|
| Remote does not control lights on Windward III fans or CHQ8BT7096T (red light button) remotes. |
|
Specifications
- Model Number: UC7087T (Anderic RR7087TR)
- Product Dimensions: 5.5 x 3 x 1.5 inches
- Item Weight: 3.2 ounces
- Batteries Required: 4 AAA batteries
- Compatible Receivers (not limited to): UC7067FCRX, UC70960TX, UC7067REVB (reverse module)
- Color: Silver
- Special Feature: Ergonomic design
- Max Number of Supported Devices: 1
- Compatible Devices: Ceiling Fan Receiver
Warranty and Support
Warranty Information
The Anderic RR7087TR remote control comes with a 1-Year Replacement Warranty from the date of purchase. This warranty covers manufacturing defects and ensures your satisfaction with the product.
Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact Anderic customer support. Visit the official Anderic website for contact details and additional resources.
You can find more information and products from Anderic by visiting their Anderic Store on Amazon.
