1. Introduction
This manual provides essential information for the safe and effective use of your lightmaXX TOUR CASE. This robust flight case is designed to securely transport and protect up to four FLAT PAR COB, QUAD, MINI, TRI, or Vega PAR COB spotlights. Please read this manual thoroughly before using the product to ensure proper handling and longevity.
Figure 1: The lightmaXX TOUR CASE in its closed state, showcasing its durable exterior and secure latches.
2. Setup
- Unpacking: Carefully remove the TOUR CASE from its packaging. Inspect for any signs of damage incurred during shipping.
- Opening the Case: Release the butterfly latches located on the front of the case. Lift the lid to open.
- Internal Configuration: The case features internal dividers designed to accommodate up to four PAR COB spotlights. Ensure these dividers are correctly positioned to snugly fit your specific models.
- Placing Fixtures: Gently place each spotlight into its designated compartment. Ensure they are seated securely and do not shift excessively.
- Closing the Case: Lower the lid and engage all butterfly latches. Ensure they are fully secured to prevent accidental opening during transport.
Figure 2: The TOUR CASE opened, revealing four padded compartments for individual spotlights.
3. Operating the Case
The lightmaXX TOUR CASE is designed for safe transport and storage of your lighting equipment.
- Transport: Always ensure the case is fully closed and all latches are secured before moving. Use the integrated handles for lifting and carrying. Avoid dropping or subjecting the case to severe impacts.
- Storage: Store the case in a dry environment, away from extreme temperatures and direct sunlight. When stacking, ensure the surface is stable and the weight is evenly distributed.
Figure 3: Side view of the TOUR CASE, highlighting the robust carrying handle for easy transport.
4. Maintenance
- Cleaning: Wipe the exterior of the case with a damp cloth. For stubborn dirt, a mild soap solution can be used. Avoid abrasive cleaners or solvents.
- Interior Care: Periodically vacuum or wipe the interior foam to remove dust and debris.
- Hardware Inspection: Regularly check all latches, hinges, and handles for proper function and signs of wear. Lubricate moving parts if necessary with a suitable lubricant.
- Damage: If the case sustains damage, especially to its structural integrity, consider professional repair or replacement to ensure continued protection of your equipment.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Latches are stiff or difficult to close. | Dirt or debris in the mechanism; lack of lubrication. | Clean the latch mechanism. Apply a small amount of silicone-based lubricant. |
| Case lid does not close flush. | Items inside are obstructing the lid; bent frame. | Ensure all contents are properly seated. Inspect the case frame for damage. |
| Handles feel loose. | Mounting screws have loosened. | Tighten the mounting screws. Do not overtighten. |
6. Specifications
- Model: TOUR CASE 4x FLAT PAR COB, QUAD, MINI, TRI + Vega PAR COB
- Brand: lightmaXX
- Manufacturer Reference: LIG0013954-000
- Material: Wood (with aluminum profiles and steel hardware)
- Color: Multi-color (Black with silver aluminum)
- Product Dimensions (L x W x H): 63.2 x 30.5 x 27.4 cm (approximately 24.9 x 12.0 x 10.8 inches)
- Item Weight: 700 g (approximately 1.54 lbs)
- Country of Origin: Germany
Figure 4: Technical drawing illustrating the dimensions of the lightmaXX TOUR CASE.
7. Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
