Carrera GO Connecting Section (Model 20061666) Instruction Manual

Product Overview

The Carrera GO Connecting Section (Model 20061666) is an essential accessory designed to expand and enhance your Carrera GO!!! slot car racing track. This component allows for seamless integration into existing track layouts, providing flexibility for creating diverse and exciting race configurations. Made from durable plastic and metal, it ensures reliable performance and longevity.

What's in the Box

• 1 x Carrera GO Connecting Section (Model 20061666)

Setup Instructions

1. Compatibility Check: Ensure you have a compatible Carrera GO!!! set (article number 20062416 and higher) from 2017 onwards. This connecting section is designed to work specifically with these newer sets.
2. Track Extension: To extend or modify your racing layout, align the connecting section with the existing Carrera GO!!! track pieces. The male and female connectors on the track pieces should fit snugly.
3. Secure Connection: Gently push the connecting section into place until it forms a firm and stable connection with the adjacent track pieces. A secure connection is crucial for uninterrupted power flow and smooth racing.
4. Testing: After connecting, place a slot car on the track and test the connection by running the car over the newly added section. Ensure there are no power interruptions or rough transitions.

Operating Instructions

Once the Carrera GO Connecting Section is properly installed, it functions as an integral part of your racing circuit. No special operation is required for the connecting section itself; its purpose is to facilitate the expansion of your track. Simply continue to operate your slot cars as usual, enjoying the extended or modified layout.

For optimal performance, ensure all track connections, including this section, are clean and free of debris. This helps maintain consistent electrical contact for your slot cars.

Maintenance

• Cleaning: Regularly inspect and clean the metal contacts on the connecting section and other track pieces. Use a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• Storage: When not in use, store the track pieces in a clean, dry environment away from direct sunlight and extreme temperatures. Disassemble the track carefully to prevent damage to the connectors.
• Inspection: Periodically check for any signs of wear or damage to the plastic or metal components. Replace any broken or severely worn parts to ensure safe and optimal performance.

Troubleshooting

Car Not Moving or Intermittent Power:

• Check Connections: Ensure all track pieces, including the connecting section, are firmly joined. Loose connections are a common cause of power issues.
• Clean Contacts: Dirt or oxidation on the metal contacts can impede electrical flow. Clean all contacts thoroughly.
• Inspect Car Brushes: Ensure the contact brushes on the bottom of the slot car are clean and making good contact with the track rails.
• Power Supply: Verify that the power supply is correctly plugged in and functioning.

Track Pieces Not Fitting Together:

• Correct Orientation: Ensure the pieces are oriented correctly. Some pieces may only fit in one direction.
• Damaged Connectors: Inspect the connectors for any bends or breaks. Damaged connectors may prevent proper assembly.

Specifications

Warranty and Support

For specific warranty information and customer support, please refer to the official Carrera website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Visit the Carrera Store for more products and information.