1. Introduction
This manual provides essential instructions for the safe and efficient operation of your Panasonic TH-32E460D 32-inch HD Ready LED TV. Please read this manual thoroughly before using your television and retain it for future reference. It covers setup, operation, maintenance, and troubleshooting.
Image 1.1: Front view of the Panasonic TH-32E460D LED TV. This image displays the television from the front, highlighting its screen and the Panasonic branding at the bottom center.
2. Safety Information
Observe the following safety precautions to prevent damage and ensure safe operation:
- Do not expose the TV to rain or moisture.
- Do not block ventilation openings.
- Ensure proper grounding of the power plug.
- Avoid placing the TV on unstable surfaces.
- Unplug the TV during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
3. What's in the Box
Upon unpacking, verify that all the following items are included:
- 1 LED TV (Panasonic TH-32E460D)
- 1 Table Top Stand
- 1 Wall Mount Bracket
- 1 User Manual (this document)
- 1 Warranty Card
- 1 Remote Control
4. Setup
4.1. Physical Installation
Your television can be installed using either the included table-top stand or a wall mount bracket.
Table-Top Stand Installation:
- Carefully place the TV screen-down on a soft, flat surface.
- Attach the table-top stand to the designated slots at the bottom of the TV using the provided screws.
- Ensure the stand is securely fastened before placing the TV upright.
Wall Mount Installation:
- Consult a qualified technician for wall mounting to ensure proper and safe installation.
- Use the provided wall mount bracket and follow its specific instructions.
4.2. Connecting Devices
Connect your external devices to the appropriate ports on the rear and side of the TV.
Image 4.1: Rear view of the Panasonic TH-32E460D TV. This image shows the back panel of the television, detailing the various input and output ports available for connecting external devices.
Image 4.2: Close-up of the connectivity ports. This detailed view highlights the HDMI, USB, AV, and antenna input ports for connecting various media sources.
- HDMI Ports (2): Connect set-top boxes, Blu-ray players, gaming consoles, or other HDMI-enabled devices.
- USB Port (1): Connect USB storage devices for multimedia playback.
- AV Input: Connect older devices using composite video and stereo audio cables.
- Antenna Input: Connect an antenna for receiving broadcast television signals.
- Power Cord: Connect the power cord to the AC IN port and then to a wall outlet.
4.3. Initial Setup Wizard
After connecting the power and turning on the TV for the first time, an initial setup wizard will guide you through basic configurations:
- Language Selection: Choose your preferred language for the on-screen menus.
- Country/Region: Select your country or region.
- Channel Scan: The TV will automatically scan for available channels. This may take several minutes.
- Time Zone: Set the correct time zone.
- Follow any additional on-screen prompts to complete the setup.
5. Operating the TV
5.1. Remote Control Overview
The included remote control allows you to access all TV functions. Ensure batteries are correctly inserted.
5.2. Basic Functions
- Power On/Off: Press the POWER button on the remote or the TV's side panel.
- Volume Control: Use the VOL +/- buttons to adjust the sound level.
- Channel Selection: Use the CH +/- buttons to change channels or enter channel numbers directly using the numeric keypad.
- Mute: Press the MUTE button to temporarily silence the audio.
- Menu: Press the MENU button to access the TV's main settings menu.
Image 5.1: Side view of the Panasonic TH-32E460D TV. This image shows the physical control buttons located on the side of the television, including power, volume, and channel controls.
5.3. Input Source Selection
To switch between connected devices (e.g., set-top box, gaming console, USB drive):
- Press the INPUT or SOURCE button on your remote control.
- Use the arrow buttons to navigate through the list of available inputs (HDMI1, HDMI2, AV, USB, TV).
- Press OK or ENTER to select the desired input.
5.4. Multimedia Playback (USB)
The TV supports playback of various media files from a connected USB storage device.
- Insert your USB device into the USB port on the TV.
- Select the USB input source.
- Navigate through the folders and files using the remote control.
- Supported formats include .Avi, .flv, .mp4 for video, .jpg for images, and .Mp3 for audio.
6. Display and Sound Features
- Resolution: HD Ready (1366x768p) for clear picture quality.
- Refresh Rate: 200 Hertz for smooth motion.
- Display Technology: IPS LED Panel for wide viewing angles and consistent color.
- Picture Enhancement: Features Hexa Chroma Drive, Adaptive Backlight Dimming, and Dot Noise Reduction for optimized image quality.
- Sound Output: 35 Watts total audio output.
- Audio System: Built-in 2.1 Woofer and V-Audio Surround for enhanced sound experience.
7. Maintenance
To ensure the longevity and optimal performance of your TV:
- Cleaning the Screen: Gently wipe the screen with a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water or a specialized screen cleaner (do not spray directly on the screen).
- Cleaning the Cabinet: Use a soft, dry cloth to wipe the TV cabinet. Avoid using abrasive cleaners or solvents.
- Ventilation: Ensure the ventilation openings on the back of the TV are not blocked to prevent overheating.
- Power Cord: Regularly check the power cord for any damage. If damaged, contact service personnel.
8. Troubleshooting
Before contacting customer support, try the following solutions for common issues:
| Problem | Possible Solution |
|---|---|
| No power | Check if the power cord is securely plugged into both the TV and the wall outlet. Ensure the wall outlet is functioning. |
| No picture, but sound is present | Verify the correct input source is selected. Check cable connections (HDMI, AV) to external devices. |
| No sound, but picture is present | Check the volume level and ensure the TV is not muted. Verify audio cable connections. |
| Remote control not working | Replace the batteries in the remote control. Ensure there are no obstructions between the remote and the TV's IR sensor. |
| Poor picture quality | Check antenna or cable connections. Adjust picture settings (brightness, contrast, sharpness) in the TV menu. Ensure the source content is of good quality. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Panasonic |
| Model | TH-32E460D |
| Model Name | Shinobi |
| Screen Size | 32 Inches (80 cm) |
| Display Technology | LED, IPS Panel |
| Resolution | HD Ready (1366 x 768 pixels) |
| Refresh Rate | 200 Hertz |
| Viewing Angle | 178 Degrees |
| Audio Output | 35 Watts, Built-in 2.1 Woofer, V-Audio Surround |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Other Connectivity | AV Input, Antenna Input |
| Power Source | AC |
| Product Dimensions (LxWxH) | 73.3 x 8.5 x 43.7 cm |
| Item Weight | 6 kg |
| Mounting Type | Wall Mount & Table Mount |
| Model Year | 2017 |
10. Warranty and Support
Your Panasonic TH-32E460D TV comes with a standard manufacturer warranty.
- Warranty Period: 1 year standard manufacturer warranty from Panasonic.
- Installation & Service: For installation, wall mounting, or product demonstration, contact Panasonic directly at 18001031333 or 18001081333. Provide the product's model name (TH-32E460D) and seller's details from your invoice. The service center will schedule a convenient appointment.
- Customer Support: For any other queries or technical assistance, please refer to the contact information provided on your warranty card or the official Panasonic website.
