Introduction
The EJEAS V6 Motorcycle Bluetooth Headset is designed to provide clear and reliable communication for motorcyclists, skiers, and climbers. This system supports full-duplex intercom functionality for up to 6 riders, with 2 riders able to communicate simultaneously over a maximum range of 1200 meters. Featuring Bluetooth 5.1 technology and advanced noise reduction, the V6 ensures stable connections and clear audio. This manual provides detailed instructions for installation, operation, and maintenance of your EJEAS V6 headset.
Image: The EJEAS V6 Bluetooth Intercom system, showing the main units, speakers, and microphones.
Package Contents
Verify that all items listed below are included in your package:
- 2 x V6 Bluetooth Intercom Units
- 2 x Ear Speaker and Microphone Sets
- 2 x Accessory Post and Accessory Clip Sets
- 2 x Type-C Charging Cables
- 1 x User Manual
Image: A visual representation of all components included in the EJEAS V6 package.
Product Overview
The EJEAS V6 unit features intuitive controls designed for ease of use, even with gloves. Familiarize yourself with the buttons and ports for optimal operation.
Main Unit Features
- Power/Intercom Button: Used for powering on/off, initiating/ending intercom, and pairing.
- Volume Up/Next Track Button: Increases volume and navigates to the next music track.
- Volume Down/Previous Track Button: Decreases volume and navigates to the previous music track.
- Phone Button: Answers/ends calls, redials, and activates voice assistant.
- Type-C Port: For charging and connecting the speaker/microphone set.
- LED Indicator: Displays device status (power, pairing, charging).
Image: Detail of the EJEAS V6 unit highlighting the large, accessible buttons for operation with gloves.
Setup
1. Charging the Device
Before first use, fully charge the EJEAS V6 unit. Connect the provided Type-C charging cable to the unit and a USB power source. The LED indicator will show charging status. A full charge takes approximately 3 hours.
Image: A motorcyclist wearing the EJEAS V6 headset, illustrating the 850mAh battery, 18 hours of intercom time, and 260 hours of standby time.
2. Headset Installation Steps
The EJEAS V6 is compatible with most full-face and 3/4 face motorcycle helmets, as well as ski helmets. Follow these steps for proper installation:
- Attach the Clip: Secure the accessory clip to the side of your helmet. Ensure it is firmly attached.
- Mount the Intercom Unit: Slide the V6 intercom unit onto the attached clip until it clicks into place.
- Position Speakers: Place the ear speakers inside the helmet, aligning them with your ears for optimal audio. Use the adhesive pads if necessary.
- Position Microphone: Attach the microphone to a suitable position inside the helmet, ensuring it is close to your mouth for clear voice pickup.
- Connect Cables: Plug the speaker and microphone cable into the Type-C port on the V6 unit.
Image: Step-by-step visual guide for installing the EJEAS V6 headset components onto a helmet.
Operating Instructions
1. Power On/Off
- Power On: Press and hold the Power/Intercom button for approximately 3 seconds until the LED indicator lights up.
- Power Off: Press and hold the Power/Intercom button for approximately 3 seconds until the LED indicator turns off.
2. Bluetooth Pairing with Phone
- Ensure the V6 unit is powered off.
- Press and hold the Power/Intercom button for about 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
- On your mobile phone, enable Bluetooth and search for "EJEAS V6".
- Select "EJEAS V6" to connect. Once paired, the LED will flash blue slowly.
3. Intercom Communication
The EJEAS V6 supports communication between up to 6 riders, with 2 riders talking simultaneously. The host unit can select one of the 5 sub-devices to communicate with.
- Pairing Intercom Units: Refer to the detailed pairing instructions in the full user manual for multi-unit pairing sequences. Generally, units are paired sequentially (A to B, B to C, etc.).
- Initiate Intercom: Briefly press the Power/Intercom button on one unit to start communication with a paired unit.
- End Intercom: Briefly press the Power/Intercom button again to end the intercom conversation.
Image: Two riders on motorcycles engaged in clear communication using the EJEAS V6 intercom system.
4. Phone Calls
- Answer Call: When a call comes in, the V6 will automatically answer after 5 seconds. Alternatively, briefly press the Phone button.
- End Call: Briefly press the Phone button during a call.
- Reject Call: Press and hold the Phone button for 2 seconds when a call comes in.
- Redial: Double-press the Phone button to redial the last number.
5. Music Playback
- Play/Pause: Briefly press the Phone button to play or pause music.
- Next Track: Briefly press the Volume Up button.
- Previous Track: Briefly press the Volume Down button.
6. Voice Assistant (Siri/Google Assistant)
When connected to your phone, you can activate your device's voice assistant:
- Activate: Press and hold the Phone button for 2 seconds.
Image: The EJEAS V6 unit demonstrating voice activation capabilities, compatible with smartphone assistants like Siri.
Maintenance
To ensure the longevity and optimal performance of your EJEAS V6 headset, follow these maintenance guidelines:
- Cleaning: Wipe the unit with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Water Resistance: The V6 unit is rated IP65 waterproof, meaning it is protected against dust and low-pressure water jets. While it can withstand rain, avoid submerging it in water.
- Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.
- Battery Care: For long-term storage, charge the battery to about 50% every few months to maintain battery health.
Image: A motorcyclist riding in wet conditions, illustrating the IP65 waterproof capability of the EJEAS V6 headset.
Troubleshooting
If you encounter issues with your EJEAS V6 headset, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery; Device frozen | Charge the device fully; Perform a reset by holding the power button for 10 seconds. |
| Cannot pair with phone | Device not in pairing mode; Phone Bluetooth off | Ensure V6 is in pairing mode (flashing red/blue); Enable Bluetooth on phone and retry. |
| Intercom not connecting | Units not paired correctly; Out of range | Re-pair intercom units according to manual; Ensure units are within 1200m range. |
| Poor audio quality/noise | Microphone position; High wind noise; Environmental interference | Adjust microphone closer to mouth; Ensure noise reduction is active; Move away from sources of interference. |
| Short battery life | Battery degradation; Frequent use at high volume | Ensure full charge before use; Reduce volume if possible; Consider battery replacement if very old. |
Specifications
Key technical specifications for the EJEAS V6 Motorcycle Bluetooth Headset:
| Feature | Detail |
|---|---|
| Model Name | V6 |
| Bluetooth Version | 5.1 |
| Connectivity Technology | Wireless |
| Intercom Range | Up to 1200 meters (barrier-free ideal distance) |
| Max Intercom Riders | 6 (2 simultaneous talkers) |
| Battery Capacity | 850mAh Lithium Polymer |
| Charging Time | Approximately 3 hours |
| Intercom Time | Up to 18 hours |
| Music Playback Time | Up to 25 hours |
| Standby Time | Approximately 260 hours |
| Water Resistance Level | IP65 Waterproof |
| Noise Control | Adaptive Noise Cancellation |
| Headphones Jack | Type-C |
| Product Dimensions | 3.31 x 0.63 x 1.57 inches |
| Item Weight | 12.7 ounces |
Warranty and Support
EJEAS products are designed for durability and performance. For warranty information, please refer to the specific warranty card included with your product or visit the official EJEAS website. For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact EJEAS customer service through their official channels.
