1. Product Overview
The Good Earth Lighting LED security flood light is designed to provide enhanced safety and security for outdoor areas such as backyards and driveways. This fixture features a durable die-cast aluminum housing with a bronze finish and a shatter-resistant polycarbonate diffuser for even light distribution. It includes integrated 34-watt LED lamps that emit a bright white light, offering maximum illumination with an estimated lamp life of 50,000 hours. The design incorporates swivel joints for precise aiming of the light heads and a universal mounting plate for simplified installation.
Key features include:
- Maximum Illumination: Integrated LEDs produce over 3300 lumens with low energy consumption (34 watts).
- Motion Activated: Detects motion up to 100 feet within a 240-degree range.
- Adjustable Heads: Three light heads can be adjusted for precise aiming and broad light coverage.
- Easy Installation: Universal mounting platform supports wall, eave, or surface box mounting.
- Long Lamp Life: Estimated 50,000 hours of lamp life.
Figure 1.1: Good Earth Lighting Three-Head 2N1 LED Motion Security & Area Light (Bronze finish).
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- WARNING: Risk of fire. Use only on circuits rated for the fixture's wattage.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ground the fixture properly to avoid potential electrical shocks.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Ensure all connections are secure and properly insulated.
- Do not look directly into the LED light source when the fixture is illuminated.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x LED Motion Security & Area Light Fixture with integrated LED lights
- 1 x Universal Mounting Plate
- Mounting Hardware (screws, wire nuts, etc.)
- Pre-installed push-in wire connectors
- Instruction Manual (this document)
4. Installation
This fixture is designed for direct wire installation and can be mounted on walls, eaves, or surface boxes. For detailed step-by-step installation instructions, please refer to the official Installation Manual PDF provided by Good Earth Lighting. A link to this document is available in the Warranty & Support section of this manual.
Key installation considerations:
- Ensure the mounting surface is sturdy enough to support the fixture.
- The universal mounting plate simplifies attachment to various electrical boxes.
- Proper wiring and grounding are essential for safe operation.
Figure 4.1: Packaging illustrating various mounting options (Wall, Eave, Box).
5. Setup & Configuration
After installation, configure the light's settings using the controls located on the motion sensor unit.
Figure 5.1: Control panel with settings for Range, Time, and Light Mode.
5.1. Adjusting Light Heads
The three LED light heads are independently adjustable. Loosen the locking nuts on the swivel joints, position each head to direct light to your desired area, and then tighten the locking nuts securely.
5.2. Motion Sensor Settings (2N1 Functionality)
The control panel allows you to customize the motion sensor's behavior and light output:
- Range: Adjusts the motion detection sensitivity and distance (e.g., 5 feet to 60 feet).
- Time: Sets how long the light remains on after motion is detected (e.g., Test, 1 minute, 5 minutes, 10 minutes).
- Light Mode (2N1):
- Security Light (High Beam): Activates full brightness (3300 lumens) upon motion detection.
- Area Light (Low Beam): Provides continuous low-level illumination, then switches to high beam upon motion detection. Settings may include "Dusk To Dawn" for continuous low-level light from dusk till dawn, or timed options (e.g., 3 hours, 5 hours) for low-level light after dusk.
- OFF: Disables the light.
Refer to the detailed installation manual for specific instructions on setting each dial.
6. Operation
Once installed and configured, the Good Earth Lighting 2N1 LED Motion Security & Area Light operates automatically based on your chosen settings.
- Motion Detection: The integrated motion sensor will detect movement within its set range and angle (up to 100 ft, 240 degrees).
- Light Activation:
- In Security Light (High Beam) mode, the light will turn on at full brightness when motion is detected and remain on for the set time duration.
- In Area Light (Low Beam) mode, the light will provide continuous low-level illumination during the set period (e.g., Dusk To Dawn, 3 hours, 5 hours). Upon motion detection, it will switch to full brightness for the set time duration, then return to low-level illumination.
- Automatic Shut-off: After the set time duration, if no further motion is detected, the light will turn off (in Security Light mode) or return to low-level illumination (in Area Light mode).
7. Maintenance
The Good Earth Lighting LED fixture is designed for long-term, low-maintenance operation. The integrated LEDs have an estimated life of 50,000 hours and are not user-replaceable.
- Cleaning: Periodically clean the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or polycarbonate diffuser.
- Inspection: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure the mounting is secure.
- LEDs: Do not attempt to replace the integrated LED lamps.
8. Troubleshooting
If your light fixture is not operating as expected, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power; faulty wiring; sensor blocked; incorrect settings. | Check circuit breaker/fuse. Verify wiring connections. Ensure sensor is clear of obstructions. Adjust "Dusk To Dawn" or "OFF" settings. |
| Light stays on continuously. | Continuous motion detected; "Test" mode active; "Dusk To Dawn" or timed Area Light mode active. | Ensure no constant motion in detection zone. Switch out of "Test" mode. Verify light mode setting. |
| Motion sensor not detecting. | Sensor range too low; sensor obstructed; incorrect mounting height. | Increase sensor range setting. Clear obstructions. Ensure fixture is mounted at recommended height. |
| Light flickers or dims. | Loose wiring connection; power fluctuations. | Check all electrical connections. Consult a qualified electrician if problem persists. |
For more comprehensive troubleshooting steps, please refer to the official Installation Manual PDF.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Good Earth Lighting |
| Model Number | SE1095-BP2-02LF0-G |
| Product Dimensions | 12"L x 9"W x 5.75"H |
| Item Weight | 2.17 pounds |
| Color | Bronze |
| Material | Die Cast Housing, Polycarbonate Diffuser |
| Light Source Type | Integrated LED |
| Wattage | 34 watts |
| Brightness | 3300 Lumens |
| Lamp Life | 50,000 hours (estimated) |
| Motion Sensor Range | Up to 100 ft |
| Motion Sensor Angle | 240 degrees |
| Installation Type | Direct Wire, Flush Mount (Wall, Eave, Surface Box) |
| Indoor/Outdoor Usage | Outdoor |
| Certifications | ETL Listed, EPA Energy Star Certified |
10. Warranty & Support
10.1. Limited Warranty
The Good Earth Lighting Three-Head 2N1 LED Motion Security & Area Light carries a 10-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official product documentation or contact Good Earth Lighting customer service.
10.2. Additional Resources
For detailed installation instructions, wiring diagrams, and advanced troubleshooting, please download the official Installation Manual (PDF):
Download Installation Manual (PDF)
10.3. Customer Support
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Good Earth Lighting customer support. Contact information can typically be found on the product packaging or the official Good Earth Lighting website.
