MD Augustine Professional Barber and Stylist Shears Instruction Manual

Introduction

This instruction manual provides essential information for the proper use, care, and maintenance of your MD Augustine Professional Barber and Stylist Shears. Designed for precision and durability, these stainless steel shears are crafted for professional use. Please read this manual thoroughly before initial use to ensure optimal performance and longevity of your tool.

Image: The MD Augustine Professional Barber and Stylist Shears, showcasing their sleek silver stainless steel design and ergonomic finger openings.

Safety Information

These shears are extremely sharp and designed for professional hair cutting. Improper handling can result in injury. Always observe the following safety precautions:

• Keep out of reach of children.
• Handle with care; blades are razor sharp.
• Always close the shears when not in use.
• Store in a protective case or pouch to prevent accidental injury and blade damage.
• Do not use for purposes other than cutting hair.

Setup

1. Unpacking: Carefully remove the shears from their packaging. Inspect for any signs of damage during transit.
2. Initial Cleaning: Before first use, wipe the blades with a soft, dry cloth to remove any manufacturing residues.
3. Finger Placement: Insert your ring finger into the smaller finger hole and your thumb into the larger finger hole. The pinky finger rests on the tang (finger rest) for stability and control.
4. Tension Adjustment: The shears feature an adjustable tension screw. To adjust, use a small screwdriver or the provided tension key (if included) to turn the screw.
   • Turn clockwise to tighten the tension (for thicker hair).
   • Turn counter-clockwise to loosen the tension (for finer hair).

   Proper tension allows the blades to close smoothly without excessive resistance or looseness. Test by opening and closing the shears; they should feel fluid and precise.

Operating Instructions

The MD Augustine Shears are designed for smooth and precise cutting. Here are general guidelines for operation:

• Grip: Maintain a comfortable and stable grip. The ambidextrous design allows for use by both left and right-handed individuals.
• Cutting Motion: Use a smooth, controlled motion when cutting. Avoid forcing the blades through hair.
• Blade Angle: The angle at which you hold the shears relative to the hair will affect the cut. Practice to achieve desired results.
• Clean Hair: Always cut clean, dry, or slightly damp hair. Cutting dirty or wet hair can dull the blades faster and affect performance.

Maintenance

Regular maintenance is crucial for preserving the sharpness and lifespan of your shears.

• Cleaning: After each use, wipe the blades clean with a soft, dry cloth to remove hair and product residue. For thorough cleaning, use a shear cleaning spray and wipe dry.
• Lubrication: Apply a small drop of shear oil to the pivot screw area daily or as needed. Open and close the shears several times to distribute the oil, then wipe off any excess. This keeps the action smooth and prevents corrosion.
• Storage: Store your shears in a protective case or pouch when not in use. This protects the blades from damage and keeps them clean.
• Sharpening: When the shears begin to feel dull or pull hair, it is time for professional sharpening. Do not attempt to sharpen them yourself, as this can damage the precision edge. Seek a qualified shear sharpener.
• Inspection: Periodically inspect the blades for nicks or damage. If damage is present, professional repair or replacement may be necessary.

Troubleshooting

Specifications

Warranty and Support

MD stands behind the quality of its products. For any questions regarding your MD Augustine Professional Barber and Stylist Shears, including warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the contact information provided with your purchase or visit the official MD website.