1. Introduction
This user manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Vintography Mediacom 2025B2-B1 Universal On Demand Cable/TV Remote Control. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
2. Safety Information
- Do not expose the remote control to direct sunlight, heat sources, or extreme temperatures.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Do not immerse the remote control in water or any other liquids.
- If batteries are leaking, remove them carefully and dispose of them according to local regulations. Avoid contact with skin and eyes.
- Keep batteries out of reach of children.
3. Package Contents
Please check the package for the following items:
- 1 x Vintography Mediacom 2025B2-B1 Universal Remote Control
- 2 x AA Batteries
4. Product Overview
Familiarize yourself with the buttons and features of your new remote control.
Figure 4.1: Front view of the Mediacom 2025B2-B1 Remote Control. Key buttons include Power, TV/Cable/Aux selectors, Menu, Guide, OK/Select, Volume, Channel, and numeric keypad.
Key Button Functions:
- POWER: Turns the selected device on or off.
- TV/CABLE/AUX: Selects the device to be controlled (Television, Cable Box, or Auxiliary device).
- MENU: Accesses the main menu of the selected device.
- GUIDE: Displays the program guide.
- OK/SELECT: Confirms a selection or enters a menu item.
- INFO: Displays information about the current program or selection.
- VOL +/-: Adjusts the volume.
- CH +/-: Changes the channel.
- LIST: Accesses recorded programs or a list of channels.
- ON DEMAND: Accesses On Demand content.
- Numeric Keypad (0-9): Enters channel numbers or other numerical inputs.
5. Setup
5.1 Battery Installation
To install the batteries:
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards and lift it off.
- Insert the two AA batteries, ensuring the positive (+) and negative (-) ends match the diagrams inside the compartment.
- Replace the battery cover by sliding it back into place until it clicks securely.
Figure 5.1: Back view of the Mediacom 2025B2-B1 Remote Control, illustrating the battery compartment and quick setup guide.
5.2 Programming the Remote Control
The Mediacom 2025B2-B1 is a universal remote control designed to operate various devices. Programming typically involves entering a code specific to your device's brand. Refer to the quick setup guide on the back of the remote or the manufacturer's website for specific programming codes and instructions.
General Programming Steps (may vary):
- Turn on the device you wish to control (e.g., TV, Cable Box).
- Press and hold the desired device button (e.g., TV, CABLE) on the remote until the indicator light stays lit.
- Enter the 4-digit programming code for your device's brand. The indicator light should turn off.
- Point the remote at the device and press the POWER button. If the device turns off, the remote is successfully programmed.
- If the device does not respond, try the next code listed for your brand or use the code search method if available.
6. Operating Instructions
Once programmed, your remote control can operate your devices. Ensure the correct device mode (TV, CABLE, AUX) is selected before attempting to control a device.
- Changing Channels: Press the CH+ or CH- buttons, or use the numeric keypad to enter a channel number and then press OK/SELECT.
- Adjusting Volume: Press the VOL+ or VOL- buttons.
- Accessing Menus: Press the MENU button to navigate device settings. Use the directional arrows and OK/SELECT to make selections.
- Using the Guide: Press the GUIDE button to view program listings.
- On Demand: Press the ON DEMAND button to access video on demand services.
- Playback Controls: Use the dedicated playback buttons (Play, Pause, Stop, Rewind, Fast Forward, Record) for DVR or media playback.
7. Maintenance
7.1 Cleaning the Remote
To clean your remote control:
- Wipe the surface with a soft, dry cloth.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner.
- Do not use harsh chemicals or abrasive cleaning agents.
7.2 Battery Replacement
Replace batteries when the remote's response becomes sluggish or the indicator light does not illuminate. Follow the battery installation steps in Section 5.1.
8. Troubleshooting
If you encounter issues with your remote control, try the following solutions:
- Remote not responding:
- Check if the batteries are inserted correctly and have sufficient charge. Replace if necessary.
- Ensure there are no obstructions between the remote and the device's infrared sensor.
- Make sure you have selected the correct device mode (TV, CABLE, AUX).
- Remote not controlling device after programming:
- Verify that you have entered the correct programming code for your device's brand and model.
- Try other codes listed for your device's brand.
- Repeat the programming steps carefully.
- Some buttons not working:
- This may indicate a partial programming issue or a specific button mapping. Re-program the remote.
- Ensure the remote is clean and no debris is lodged under the buttons.
9. Specifications
| Model Number | 2025B2-B1 |
| Brand | Mediacom |
| Item Weight | 6 ounces |
| Color | Black |
| Connectivity Technology | Infrared |
| Compatible Devices | Television, Set Top Box |
| Special Feature | Universal |
10. Warranty and Support
10.1 Warranty Information
Specific warranty details for the Vintography Mediacom 2025B2-B1 remote control are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for any warranty claims.
10.2 Customer Support
For further assistance, programming codes, or troubleshooting not covered in this manual, please visit the official Mediacom support website:
