Introduction
Thank you for choosing the Eco Light Peri LED Outdoor Wall Light. This product is designed to provide efficient and reliable outdoor illumination with advanced features such as a motion sensor and ambient light function. Please read this manual carefully before installation and operation to ensure proper use and longevity of your light.
This LED wall light features a powerful 18W LED source, delivering 1710 lumens of bright 5000K light. Its integrated motion detector offers a wide detection angle and adjustable range, while the ambient light function provides flexible lighting options.
Safety Instructions
- Always disconnect power before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician to ensure compliance with local electrical codes.
- Do not attempt to modify the product in any way.
- Ensure the mounting surface is suitable to support the weight of the fixture.
- Keep packaging materials away from children.
Setup and Installation
Tools Required: Drill, screwdriver, wire strippers, measuring tape, pencil.
- Unpack: Carefully remove the light fixture and all components from the packaging. Inspect for any damage.
- Choose Location: Select a suitable outdoor location for mounting, ensuring it is within reach of the power supply and provides the desired coverage for the motion sensor.
- Mark Drilling Points: Hold the mounting bracket against the wall at the desired height and mark the drilling points with a pencil.
- Drill Holes: Drill holes at the marked points and insert appropriate wall plugs (if necessary).
- Mount Bracket: Secure the mounting bracket to the wall using screws.
- Wiring: Connect the electrical wires from your power supply to the terminals on the light fixture. Ensure correct polarity (Live, Neutral, Earth). Refer to local wiring regulations.
- Attach Fixture: Secure the light fixture to the mounting bracket. Ensure all connections are tight and the fixture is stable.
- Restore Power: Once installation is complete, restore power to the circuit.
Figure 1: Front view of the Eco Light Peri LED Outdoor Wall Light, showing the LED panel and motion sensor. This image illustrates the general appearance and components of the light fixture.
Figure 2: Side view of the Eco Light Peri LED Outdoor Wall Light, highlighting the adjustable arm and mounting base. This view helps in understanding the physical dimensions and mounting mechanism.
Operating Instructions
The Eco Light Peri LED Outdoor Wall Light offers several adjustable settings for optimal performance.
Motion Sensor Settings
- Detection Range: Adjustable from 6 to 25 meters. Use the 'DISTANCE' dial on the sensor to set the desired range.
- Detection Angle: The sensor has a 180° detection angle. Position the light to cover the desired area.
- Illumination Duration: The light can be set to stay on for 1 minute, 3 minutes, 10 minutes, or 'TEST' mode after motion is detected. Use the 'TIME' dial to select.
- TEST Mode: For initial setup, the light will turn on for a few seconds each time motion is detected, regardless of ambient light, allowing you to adjust the sensor's position and range.
Ambient Light Function
This feature allows the light to provide a continuous, subtle illumination during darkness, increasing to full brightness upon motion detection. It can be adjusted in 3 steps: Off, Soft, or Bright.
- Off: The ambient light function is disabled. The light will only activate upon motion detection.
- Soft: Provides a low-level, continuous light during darkness. Upon motion detection, it switches to full brightness.
- Bright: Provides a higher-level, continuous light during darkness. Upon motion detection, it switches to full brightness.
- Automatic Mode: The light also features an automatic mode where it turns on automatically at night and off during the day. This works in conjunction with the ambient light settings.
Figure 3: The Eco Light Peri LED Outdoor Wall Light installed on a brick wall, demonstrating its operational appearance. This image shows the light in an active state, providing illumination.
Maintenance
The Eco Light Peri LED Outdoor Wall Light requires minimal maintenance.
- Cleaning: To clean the fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- LEDs: The integrated LED light source is designed for long life and is not user-replaceable.
- Inspection: Periodically check the mounting and wiring for any signs of wear or damage. If any issues are found, consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Sensor settings incorrect. Ambient light too high (if not in TEST mode). | Check circuit breaker and wiring. Adjust 'TIME' and 'DISTANCE' dials. Ensure 'AMBIENT LIGHT' is set correctly for desired operation. Test in 'TEST' mode. |
| Light stays on continuously. | Illumination duration set too long. Ambient light function set to 'Soft' or 'Bright'. Constant motion in detection area. | Adjust 'TIME' dial to a shorter duration. Set 'AMBIENT LIGHT' to 'Off' if continuous light is not desired. Adjust sensor angle or range to exclude unwanted motion sources. |
| Motion sensor not detecting. | Detection range set too low. Sensor obstructed. Incorrect sensor angle. | Increase 'DISTANCE' setting. Clear any obstructions in front of the sensor. Adjust the sensor head to cover the desired area. |
| Light flickers or dims unexpectedly. | Unstable power supply. Loose wiring connection. | Consult a qualified electrician to check power supply. Ensure all wiring connections are secure (with power off). |
Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | Y_1683865 |
| ASIN | B073XNNSZN |
| Brand | Eco Light |
| Dimensions (L x W x H) | 22 x 20 x 22 cm |
| Weight | 1.34 kg |
| Material | Plastic |
| Color | White |
| Light Source Type | LED |
| Power Consumption | 18 W |
| Luminous Flux | 1710 lumens |
| Color Temperature | 5000 K |
| Voltage | 230 Volts |
| Energy Efficiency Class | A++ - A |
| Motion Sensor Range | 6 - 25 m |
| Motion Sensor Angle | 180° |
| Illumination Duration Settings | 1 min, 3 min, 10 min, Test |
| Special Features | Motion Detector, Ambient Light Function (Off/Soft/Bright), Automatic Night/Day Mode |
Warranty Information
This Eco Light Peri LED Outdoor Wall Light comes with a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official Eco Light website or contact customer support.
Customer Support
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Eco Light customer support through their official website or the retailer where you purchased the product.
For further information, please visit the Eco Light brand page.
