Storkcraft Steveston 5-in-1 Convertible Crib and Changer with Drawer Instruction Manual

1. Product Overview

The Storkcraft Steveston 5-in-1 Convertible Crib and Changer is a versatile nursery solution designed to adapt as your child grows. This unit combines a crib with an attached changing table, featuring two open shelves and an under-crib storage drawer. It is designed to convert into a toddler bed, daybed, and full-size bed, offering long-term utility.

• 5-in-1 Convertible Design: Functions as a crib, toddler bed, daybed, and full-size bed.
• Integrated Changer: Includes a changing table with two open shelves and a water-resistant changing pad.
• Adjustable Mattress Support: Features 4 height options for the mattress base.
• Under-Crib Storage: A convenient drawer provides additional storage space.
• GREENGUARD Gold Certified: Screened for over 10,000 chemicals and VOCs for improved indoor air quality.
• Safety Standards: Meets or exceeds ASTM and CPSIA safety standards.

Image 1: The Storkcraft Steveston 5-in-1 Convertible Crib and Changer in its primary crib configuration with the attached changing table and storage drawer.

2. Safety Information

Your child's safety is paramount. Please read and follow all instructions and warnings carefully before assembly and use. Keep this manual for future reference.

• Crib Use: This crib should only be used until your child can climb out or is taller than 35 inches (89 cm).
• Mattress: Use only a standard full-size crib mattress that fits snugly without gaps.
• Changing Table Weight Limit: The changing table has a maximum weight recommendation of 35 lbs.
• Assembly: Ensure all parts are correctly assembled and all fasteners are tightened securely. Regularly check for loose hardware.
• Placement: Do not place the crib near windows where cords from blinds or drapes could strangle a child. Avoid placing near heaters or other heat sources.
• Choking Hazards: Keep small parts, plastic bags, and other potential choking hazards away from children.
• GREENGUARD Gold Certified: This product is certified for low chemical emissions, contributing to healthier indoor air quality.
• Baby Safety Alliance Verified: This product has been independently tested and verified for safety.

3. Setup and Assembly

While detailed assembly instructions are provided with the product packaging, this section offers a general overview. Assembly is required for the Storkcraft Steveston crib and changer. It is recommended to have two adults for assembly.

1. Unpack Components: Carefully remove all parts from the packaging and verify against the parts list in your included instruction manual.
2. Prepare Workspace: Assemble the unit in the room where it will be used, on a soft, clean surface to prevent scratches.
3. Follow Manual: Refer to the step-by-step instructions and diagrams in the physical instruction manual provided with your product for precise assembly of the crib, changing table, and drawer.
4. Secure Fasteners: Ensure all screws, bolts, and other fasteners are tightened securely. Do not overtighten.
5. Final Check: Before use, confirm that the crib and changer are stable and all components are correctly installed.

Image 2: The assembled Storkcraft Steveston crib and changer positioned in a nursery, demonstrating its integrated design.

4. Operating Instructions

4.1 Crib Operation

• Mattress Height Adjustment: The mattress support base offers four adjustable height options. Adjust the height to the lowest position once your child can sit up unassisted. Always ensure the mattress support is securely locked into place.
• Mattress Placement: Place a standard full-size crib mattress (sold separately) onto the mattress support. Ensure there are no gaps between the mattress and the crib sides.

4.2 Changing Table Operation

• Changing Pad: The unit includes a water-resistant changing pad. Place it securely on the changing table surface.
• Storage: Utilize the two open shelves and the under-crib storage drawer for diapers, wipes, and other essentials.
• Supervision: Always keep one hand on your child while they are on the changing table. Never leave a child unattended.

Image 3: A detailed view of the changing table area, showing the changing pad, open shelves, and the pull-out storage drawer beneath the crib.

5. Conversion Instructions

The Storkcraft Steveston is designed to convert into multiple configurations to grow with your child. Conversion kits are sold separately.

5.1 Crib to Toddler Bed Conversion

To convert the crib into a toddler bed, you will need the compatible toddler guardrail (sold separately, model number 01350-30x). Remove the front crib rail and install the toddler guardrail according to the instructions provided with the guardrail kit.

Image 4: The Storkcraft Steveston unit configured as a toddler bed, with a short safety rail replacing one side of the crib.

5.2 Toddler Bed to Daybed Conversion

To convert the toddler bed into a daybed, simply remove the toddler guardrail. The daybed configuration retains the back panel and side panels, providing an open sleeping or seating area.

Image 5: The Storkcraft Steveston unit configured as a daybed, showing the open front and the remaining side and back panels.

5.3 Daybed to Full-Size Bed Conversion

To convert the daybed into a full-size bed, you will need a full-size bed conversion kit (sold separately). This typically involves using the crib's headboard and footboard with metal bed rails to support a full-size mattress.

Image 6: The Storkcraft Steveston unit converted into a full-size bed, utilizing the crib's headboard and footboard.

Image 7: A diagram visually representing the different conversion stages: Crib & Changer, Toddler Bed, Daybed, and Full-Size Bed.

6. Maintenance

• Cleaning: Wipe the product with a damp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish.
• Regular Checks: Periodically inspect all screws, bolts, and other fasteners to ensure they are tight and secure. Do not use the product if any parts are missing, damaged, or broken.
• Storage: If storing the product, do so in a dry, temperature-controlled environment to prevent warping or damage to the wood.

7. Troubleshooting

If you encounter any issues during assembly or use, please refer to the following general advice:

• Missing Parts/Hardware: If any parts or hardware are missing, do not attempt to assemble the product. Contact Storkcraft Customer Care immediately.
• Assembly Difficulties: Double-check the physical instruction manual's diagrams and steps. Ensure you are using the correct hardware for each step.
• Stability Issues: Verify that all fasteners are securely tightened. Ensure the product is on a flat, level surface.

For further assistance, please contact Storkcraft Customer Care (see Section 9).

8. Specifications

Image 8: A diagram illustrating the key dimensions (length, width, height) of the Storkcraft Steveston crib and changer unit.

9. Warranty and Support

The Storkcraft Steveston 5-in-1 Convertible Crib and Changer is backed by a 1-year limited manufacturer's warranty.

For warranty claims, missing parts, assembly assistance, or any other product-related inquiries, please contact Storkcraft Customer Care. Contact information can typically be found on the manufacturer's website or in the product packaging.

Manufacturer: Storkcraft

For the most up-to-date support information, please visit the official Storkcraft website.