Weiser SmartCode 10 Polished Brass Keyless Entry Door Lock User Manual

Introduction

The Weiser SmartCode 10 Polished Brass Keyless Entry Door Lock offers a blend of security and convenience for your home. This electronic deadbolt allows entry via a personalized access code or a traditional key. Designed for ease of use and installation, it features a backlit keypad for night visibility and one-touch locking functionality. The SmartCode 10 is equipped with SmartKey Technology, providing enhanced security against common break-in methods and the ability to re-key the lock yourself.

Figure 1: Front view of the Weiser SmartCode 10 Polished Brass Keyless Entry Door Lock, showcasing the keypad and keyhole.

Package Contents

Before beginning installation, ensure all components are present:

• Interior Assembly Unit
• Exterior Assembly Unit (Keypad)
• Latch
• Strike Plate
• Mounting Plate
• Adapter Ring
• 2 Keys
• Screws
• SmartKey Tool
• Installation Manual (this document)
• 4 AA Alkaline Batteries (included)

Setup and Installation

The Weiser SmartCode 10 is designed for easy installation and fits most standard residential door preparations. A screwdriver is typically the only tool required for basic installation. For optimal performance and to avoid common issues, it is crucial to read and understand all installation instructions thoroughly before beginning.

Door Specifications:

• Fits door thickness: 1-3/8" to 2"
• Cross Bore: 2-1/8"

Figure 2: The Weiser SmartCode 10 lock shown installed on a typical residential door.

For detailed step-by-step instructions, refer to the included printed manual or the manufacturer's official installation guides available online. Ensure proper alignment of all components, especially the latch and deadbolt mechanism, to prevent operational issues.

Figure 3: Rear view of the interior assembly, showing the battery compartment and mounting points.

Operating Instructions

Keypad Entry

To unlock the door using the keypad, simply enter your personalized access code. The keypad is backlit, providing increased visibility in low-light conditions. The backlight remains illuminated for 30 seconds after inactivity.

One-Touch Locking

The SmartCode 10 features a convenient one-touch locking function. To lock the door from the outside, simply press the lock button (typically the padlock icon) on the keypad. No additional turning or twisting of the deadbolt is required.

User Codes

The lock can store up to 16 unique user codes, making it ideal for sharing access with family, friends, or guests. There is also an option for one master code for programming and managing other user codes. Refer to the detailed programming instructions in the full manual for adding, deleting, or modifying user codes.

SmartKey Technology

Weiser's SmartKey Security provides advanced protection against common break-in techniques such as kick-ins, bumping, and picking. This technology also allows you to re-key the lock yourself in seconds, rendering lost or unreturned keys obsolete. Use the included SmartKey Tool and follow the re-keying instructions carefully.

Figure 4: Diagram illustrating the various security features of Weiser's SmartKey Technology.

Maintenance

Battery Replacement

The SmartCode 10 operates on 4 AA alkaline batteries. For optimal performance, it is recommended to replace the batteries approximately every 40 to 50 days, or immediately when the low battery indicator activates. Prompt battery replacement helps prevent operational issues and ensures consistent functionality.

Cleaning

To clean the lock's exterior, use a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components. Do not spray cleaning solutions directly onto the lock.

Troubleshooting

If you encounter issues with your Weiser SmartCode 10 lock, consider the following common solutions:

• Lock Not Responding or Beeping Once and Shutting Off: This often indicates low or depleted batteries. Replace all four AA alkaline batteries with new ones. Ensure they are inserted with correct polarity.
• Lock Getting Stuck in "Unlock" or "Lock" Mode / Repeated Actions: This can be caused by low batteries or an obstruction in the deadbolt mechanism. First, replace the batteries. If the issue persists, remove the battery pack to reset the lock. Check for any physical obstructions around the deadbolt or strike plate that might be preventing smooth operation. Ensure the lock is properly aligned with the door frame.
• Keypad Not Responding: Check battery levels. If batteries are new, ensure the cable connecting the exterior keypad to the interior assembly is securely connected.
• Difficulty Entering Codes: Ensure you are pressing the buttons firmly and that the keypad is clean.
• Lock Jams or Operates Roughly: This may indicate an alignment issue during installation or a worn component. Re-check the installation steps, particularly the latch and strike plate alignment. Ensure the door frame is not warped.

If troubleshooting steps do not resolve the issue, please contact Weiser customer support for further assistance.

Specifications

Warranty Information

The Weiser SmartCode 10 Polished Brass Keyless Entry Door Lock comes with a Limited Lifetime Warranty. For specific terms and conditions, including coverage details and how to make a claim, please refer to the warranty documentation included with your product or visit the official Weiser website.

Customer Support

For technical assistance, installation questions, or warranty inquiries, please contact Weiser customer support. Detailed contact information can typically be found on the manufacturer's website or in the product packaging. When contacting support, please have your product model number (9GED17000-001) and purchase details ready.

You can visit the official Weiser store on Amazon for more information: Weiser Store

Important Safety Information

Always ensure the door is fully closed and the deadbolt is properly engaged when locking. Do not force the deadbolt if it encounters resistance. Regularly check the battery level and replace batteries as recommended to avoid unexpected lockouts. Keep keys and access codes in a secure location. Do not share access codes with unauthorized individuals.

Video Resources

No official product videos from the seller were found that meet the criteria for inclusion in this manual. For video tutorials or demonstrations, please check the manufacturer's official website or authorized channels.