Introduction
Thank you for choosing the Beurer BF350 Diagnostic Bathroom Scale. This device is designed to provide comprehensive body analysis, helping you monitor your health and fitness progress. Please read this manual carefully before first use to ensure safe and correct operation.
The Beurer BF350 measures body weight, body fat, body water, muscle percentage, bone mass, and calculates calorie requirements (BMR/AMR) and Body Mass Index (BMI). It features an elegant design with a safety glass standing surface and brushed stainless steel electrodes.
Safety Information
- This scale is intended for personal use only.
- Do not use this device if you have a medical implant (e.g., pacemaker). The accuracy of the measurement may be affected.
- Pregnant women should not use this scale for body analysis measurements.
- Place the scale on a firm, level surface to ensure accurate measurements.
- Step onto the scale with bare, dry feet for body analysis functions.
- Keep the scale away from water and moisture. Clean with a damp cloth only.
- The maximum weight capacity is 180 kg (396 lbs).
Product Overview
The Beurer BF350 Diagnostic Bathroom Scale combines functionality with a sleek design. Below is an image of the product and its key features.
Key Features:
- Elegant framed glass diagnostic scale with safety glass standing surface.
- Brushed stainless steel electrodes for accurate body analysis.
- Measures body weight, body fat, body water, muscle percentage, bone mass, and calorie requirement.
- Measurement increments: 0.1% for body fat, body water, and muscle percentage; 100 g for body weight and bone mass.
- BMI calculation function.
- 8 user memories with automatic user recognition.
- Maximum capacity: 180 kg (396 lbs).
Setup
1. Battery Installation
- Open the battery compartment on the underside of the scale.
- Insert the included batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely.
2. First Use and User Data Entry
Before taking your first measurement, you need to set up your personal data. The scale can store data for up to 8 users.
- Step briefly onto the scale to turn it on. The display will show '0.0'.
- Press the 'SET' button. The first user memory (P-1) will flash.
- Use the 'UP' or 'DOWN' arrows to select a user memory slot (P-1 to P-8). Confirm with 'SET'.
- Set your height, age, and gender using the 'UP' or 'DOWN' arrows and confirm each entry with 'SET'.
- Once all data is entered, the scale will display '0.0' and is ready for measurement.
Operation
1. Taking a Measurement
- Place the scale on a hard, flat surface.
- Step onto the scale barefoot and stand still. Ensure your feet are positioned on the stainless steel electrodes.
- The scale will automatically recognize you based on your weight and display your personal data (P-number).
- The display will show your weight, followed by body fat, body water, muscle percentage, bone mass, and calorie requirement.
- Step off the scale. The measurements will be saved to your user profile.
2. Interpreting Measurements
The following table provides general guidelines for interpreting your body analysis values. Consult a medical professional for personalized advice.
| Measurement | Description |
|---|---|
| Body Weight | Your total body mass in kilograms (kg) or pounds (lbs). |
| Body Fat (%) | The percentage of fat in your body. Healthy ranges vary by age and gender. |
| Body Water (%) | The percentage of water in your body. Essential for overall health. |
| Muscle Percentage (%) | The percentage of muscle mass in your body. Higher muscle mass generally indicates better fitness. |
| Bone Mass (kg) | The weight of your bones. This value changes very little over time. |
| BMI (Body Mass Index) | A measure that uses your height and weight to work out if your weight is healthy. |
| BMR/AMR (kcal) | Basal Metabolic Rate / Active Metabolic Rate: Your daily calorie requirement. |
Care and Maintenance
- Clean the scale regularly with a slightly damp cloth. Do not use abrasive cleaning agents or immerse the scale in water.
- Do not step on the scale with wet feet or when the surface is wet to prevent slipping.
- Store the scale in a dry place, away from extreme temperatures and direct sunlight.
- If the scale is not used for an extended period, remove the batteries to prevent leakage.
Troubleshooting
If you encounter issues with your Beurer BF350 scale, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Display shows 'Lo' | Batteries are low. | Replace the batteries. |
| Display shows 'Err' | Overload or measurement error. | Ensure weight is within capacity (max 180 kg). Step off and on again. |
| Inaccurate readings | Scale not on a flat surface, or feet not properly positioned. | Place scale on a hard, level floor. Stand still with bare, dry feet on electrodes. |
| No body analysis data | User data not entered or feet not making proper contact. | Ensure user data is set up. Stand barefoot with dry feet on electrodes. |
Technical Specifications
- Model: BF350
- Weight Capacity: 180 kg (396 lbs)
- Measurement Increments: 100 g for weight/bone mass, 0.1% for body fat/water/muscle
- User Memories: 8
- Material: Safety glass, brushed stainless steel
- Power Source: Batteries (included)
- Manufacturer: Beurer
- Dimensions (Package): 36.4 x 35.2 x 5.2 cm
- Weight (Product): Approximately 2.12 kg
Warranty and Customer Support
Beurer products are designed for reliability and durability. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Beurer website.
If you require further assistance or have questions not covered in this manual, please contact Beurer customer support. You can find contact details on the official Beurer website: www.beurer.com