Product Overview
The Diablo Demo Demon Carbide Teeth Reciprocating Saw Blades are engineered for extreme performance in both wood and metal cutting applications. These blades feature exclusive technologies designed to deliver significantly longer life and superior cutting efficiency across various materials.
Image: A set of three Diablo Demo Demon 12-inch reciprocating saw blades, featuring carbide teeth and designed for general purpose cuts in various materials including nail-embedded wood and metal.
Key Features:
- General Purpose Cuts: Designed for extreme cuts in wood, metal, and plastic with patented variable tooth technology for faster cuts and reduced vibration.
- Carbide Tooth Design: Provides up to 50X longer cutting life in wood and metal applications compared to standard blades.
- Perma-SHIELD Non-Stick Coating: Offers heat resistance, making the blade ideal for cutting all types of wood, nail-embedded wood, plastic piping, and demolition metal applications.
- Clean and Accurate Cuts: Features a 1-inch demolition body for straighter cuts and patented variable tooth technology for faster cutting.
- Advanced Material Composition: Diablo produces its own TiCo Hi-Density Carbide & Cermet II for maximum durability and superior performance.
Setup and Installation
Before installing the blade, ensure your reciprocating saw is unplugged or its battery is removed to prevent accidental startup. Always wear appropriate personal protective equipment, including safety glasses and gloves.
- Identify the blade clamp mechanism on your reciprocating saw. This mechanism varies by saw model.
- Open the blade clamp according to your saw's instructions. This usually involves twisting a collar, lifting a lever, or pressing a button.
- Insert the shank of the Diablo Demo Demon blade fully into the blade clamp. Ensure it is seated securely.
- Release or close the blade clamp mechanism to lock the blade in place.
- Gently pull on the blade to confirm it is firmly secured and will not dislodge during operation.
Refer to your reciprocating saw's user manual for specific blade installation instructions if you are unsure.
Operating Instructions
These blades are designed for general purpose cutting across a variety of materials. Always ensure the workpiece is stable and secured before cutting.
General Cutting Tips:
- Material Compatibility: Suitable for wood, nail-embedded wood, metal (1/8" - 3/8" thickness), and plastic piping.
- Starting a Cut: Place the shoe of the saw firmly against the workpiece. Start the saw at full speed before engaging the blade with the material.
- Cutting Technique: Apply steady, consistent pressure. Allow the blade to do the work; do not force it, as this can lead to premature wear or blade breakage.
- Cooling: For prolonged cuts in metal, consider using a cutting lubricant to extend blade life and improve cutting performance.
- Demolition: The robust design and carbide teeth make these blades ideal for demolition tasks involving mixed materials.
Maintenance and Storage
Proper maintenance and storage will extend the life and performance of your Diablo Demo Demon blades.
- Cleaning: After use, remove any debris, sawdust, or metal shavings from the blade. A stiff brush can be used. The Perma-SHIELD coating helps prevent material buildup.
- Inspection: Regularly inspect the blade for signs of wear, damage, or missing carbide teeth. A dull or damaged blade can be inefficient and unsafe.
- Storage: Store blades in a dry environment to prevent rust. Keep them in their original packaging or a dedicated blade case to protect the teeth from damage and prevent accidental contact.
- Replacement: Replace blades when they become dull, bent, or damaged. Continuing to use a worn blade can strain your saw and compromise cut quality and safety.
Troubleshooting
If you encounter issues while using your Diablo Demo Demon blades, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blade cuts slowly or binds | Dull blade, incorrect blade for material, insufficient power from saw, forcing the cut. | Replace blade, ensure correct blade type, check saw's battery/power, apply less pressure. |
| Excessive vibration | Loose blade, damaged blade, improper cutting technique, unstable workpiece. | Ensure blade is securely clamped, replace damaged blade, adjust technique, secure workpiece. |
| Blade overheating | Prolonged cutting without cooling, cutting too fast, dull blade. | Allow blade to cool, reduce cutting speed, use lubricant for metal, replace dull blade. |
| Poor cut quality (rough edges) | Dull blade, incorrect blade for material, excessive speed. | Replace blade, ensure appropriate blade, reduce saw speed. |
Specifications
| Attribute | Value |
|---|---|
| Model Name | DS1209CGP3 |
| Brand | Diablo |
| Material | Blend (Carbide Tipped) |
| Product Dimensions | 2.24"L x 2"W (Blade body: 15 x 1.8 x 0.5 inches) |
| Number of Teeth | 9 (6/9 TPI variable tooth design) |
| Item Thickness | 1 Inches (Blade body thickness) |
| Compatible Material | Metal, Wood (including nail-embedded wood), Plastic |
| Item Weight | 6.56 ounces |
| UPC | 008925138693 |
| Included Components | 12" Carbide Tipped General Purpose Reciprocating Blade (3-Pack) |
Safety Information
WARNING: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. (Based on Proposition 65 warning in product data)
- Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and gloves, when operating power tools and using saw blades.
- Ensure the workpiece is securely clamped or held to prevent movement during cutting.
- Keep hands and body clear of the blade's path.
- Do not use damaged or dull blades. Replace them immediately.
- Ensure the saw is unplugged or battery removed before changing blades or performing maintenance.
- Use the correct blade for the material being cut.
Warranty and Support
Specific warranty details for Diablo Demo Demon Carbide Teeth Reciprocating Saw Blades are typically provided by the manufacturer at the time of purchase or on their official website. For the most accurate and up-to-date warranty information, please refer to the official Diablo website or contact their customer service directly.
For product support, technical assistance, or to inquire about additional products, please visit the official Diablo website:
