Performance Tool W2998

Introduction

The Performance Tool W2998 Digital Battery Analyzer is designed for testing 12VDC automotive batteries and charging systems. This device offers fast and straightforward operation, providing accurate and reliable results through its digital display. It is compatible with various battery types, including Lead-Acid (LA), Absorbed Glass Mat (AGM), and Valve Regulated Lead-Acid (VRLA), and supports testing standards such as SAE, DIN, EN, IEC, and CA. The W2998 provides clear, easy-to-understand results, enabling users to quickly identify potential battery or charging system issues. Its portable design allows for convenient on-the-go testing.

Figure 1: Performance Tool W2998 Digital 12 Volt Portable Battery Analyzer.

Safety Precautions

Always observe the following safety precautions when using the battery analyzer to prevent personal injury or damage to the device or vehicle.

• Wear Eye Protection: Always wear ANSI-approved safety goggles when working near batteries. Batteries contain corrosive acid.
• Ventilation: Ensure the work area is well-ventilated. Batteries can produce explosive gases.
• Avoid Sparks: Do not smoke or allow sparks or flames near the battery.
• Proper Connection: Connect the battery clamps correctly (Red to positive, Black to negative) to avoid short circuits or damage.
• Insulated Tools: Use insulated tools to prevent accidental shorting of battery terminals.
• Vehicle Manual: Always refer to your vehicle's service manual for specific battery testing procedures and safety information.
• Keep Dry: Do not expose the analyzer to rain or wet conditions.

Package Contents

Verify that all items are present in the package:

• Performance Tool W2998 Digital 12 Volt Portable Battery Analyzer

Product Overview

Familiarize yourself with the components of the W2998 Digital Battery Analyzer:

Figure 2: Key components of the W2998 Battery Analyzer.

• Digital Display: Shows testing options, results, and operational prompts.
• Tester Clamps: Red clamp connects to the positive (+) battery terminal, Black clamp connects to the negative (-) battery terminal.
• Arrow Buttons: Used for scrolling through menu options and adjusting settings.
• ENTER Button: Used to select options and confirm actions.

Setup

The W2998 Battery Analyzer is designed for immediate use with minimal setup. It draws power directly from the battery being tested.

1. Ensure the battery terminals are clean and free of corrosion for accurate readings.
2. Connect the RED positive (+) clamp to the positive (+) terminal of the 12V battery.
3. Connect the BLACK negative (-) clamp to the negative (-) terminal of the 12V battery.
4. The analyzer will power on automatically once connected.

Operating Instructions

Basic Operation

1. Connect to Battery: As described in the Setup section, connect the red clamp to the positive terminal and the black clamp to the negative terminal. The analyzer will power on.
2. Initial Screen: The display will show the main menu or a prompt to begin testing.
3. Navigate Menus: Use the Arrow Buttons (Up/Down) to scroll through available options on the digital display.
4. Select Option: Press the ENTER Button to select a highlighted option or confirm a setting.
5. Perform Test: Follow the on-screen prompts to initiate the battery test. The analyzer will guide you through the process.
6. View Results: Once the test is complete, the results will be displayed on the screen.

Battery Type Selection

The W2998 can test various 12V battery types. It is crucial to select the correct battery type for accurate results.

• LA (Lead-Acid): Standard automotive batteries.
• AGM (Absorbed Glass Mat): Common in modern vehicles, often maintenance-free.
• VRLA (Valve Regulated Lead-Acid): Includes gel batteries and some AGM types.

Use the arrow buttons to select the battery type that matches your vehicle's battery, then press ENTER.

Interpreting Results

The analyzer provides clear results to indicate the condition of your battery and charging system. Common readings include:

• Voltage: The current voltage of the battery.
• CCA (Cold Cranking Amps): A measure of the battery's ability to start an engine in cold temperatures. Compare this to the battery's rated CCA.
• Battery Health: An overall assessment (e.g., "Good," "Recharge," "Replace").
• Charging System Test: May indicate if the alternator is charging the battery correctly.

Maintenance

Proper maintenance ensures the longevity and accuracy of your W2998 Battery Analyzer.

• Cleaning: Wipe the unit with a soft, dry cloth after each use. Do not use abrasive cleaners or solvents.
• Storage: Store the analyzer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cable Inspection: Periodically inspect the cables and clamps for any signs of damage, fraying, or corrosion. Replace if necessary.
• Terminal Cleanliness: Always ensure the battery terminals are clean before connecting the analyzer for accurate readings.

Troubleshooting

If you encounter issues with your W2998 Battery Analyzer, refer to the following common problems and solutions:

Specifications

Detailed technical specifications for the Performance Tool W2998 Digital Battery Analyzer:

Figure 3: Dimensions of the W2998 Battery Analyzer.

Warranty and Support

For information regarding product warranty, technical support, or service, please contact Performance Tool directly. Refer to the product packaging or the official Performance Tool website for the most current contact details and warranty policy.