Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting Zura Bath & Vanity Light Fixture, model P300062-015. The Zura fixture features triangular, etched opal glass and a polished chrome finish, designed to complement modern bathroom aesthetics. Please read these instructions thoroughly before beginning installation to ensure safe and proper operation.
Safety Information
WARNING: Risk of Electric Shock.
- Always disconnect power at the main circuit breaker before installation, servicing, or changing bulbs.
- Consult a qualified electrician if you are unsure about the installation process.
- All wiring connections must be in accordance with local and national electrical codes.
- Do not exceed the maximum wattage specified for the bulbs.
- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Wash hands after handling.
Package Contents
Verify that all components are present before beginning installation.
- Light Fixture Assembly (P300062-015)
- Etched Opal Glass Shades (2)
- Mounting Hardware Kit
- Installation Sheet
Specifications
| Feature | Detail |
|---|---|
| Brand | Progress Lighting |
| Model Number | P300062-015 |
| Color | Polished Chrome |
| Material | Zinc (Fixture), Glass (Shade) |
| Style | Etched Opal Glass, Modern |
| Light Fixture Form | Vanity |
| Room Type | Bathroom |
| Product Dimensions | 7"L x 4.5"W x 21"H |
| Power Source | AC |
| Installation Type | Protruding Mount, Wall Mount |
| Special Feature | Dimmable |
| Light Source Type | Incandescent (Compatible with CFL/LED) |
| Number of Light Sources | 2 |
| Voltage | 120 Volts |
| Bulb Base | E26 Medium |
| Max Wattage | 100 watts per bulb |
| Brightness | 1950 Lumen (Total) |
| Item Weight | 5.17 Pounds |
| Assembly Required | Yes |
Setup and Installation
Follow these steps carefully to install your Zura Bath & Vanity Light Fixture. Professional installation is recommended if you are unfamiliar with electrical wiring.
1. Prepare for Installation
- Turn off Power: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage tester.
- Unpack Contents: Carefully remove all components from the packaging and inspect for any damage.
- Gather Tools: You will typically need a screwdriver, wire strippers, electrical tape, and a voltage tester.
2. Mounting the Fixture
The Zura fixture can be mounted either vertically or horizontally.
Image: The Zura fixture can be installed in either a vertical or horizontal orientation to suit your design preference.
- Attach Mounting Plate: Secure the fixture's mounting plate to the electrical junction box in the wall using the provided screws. Ensure it is firmly attached.
- Wire Connections: Connect the fixture's wires to the corresponding house wires:
- Black (Hot) to Black (Hot)
- White (Neutral) to White (Neutral)
- Green or Bare Copper (Ground) to Green or Bare Copper (Ground)
- Secure Fixture: Carefully tuck the wires into the junction box and align the fixture base with the mounting plate. Secure the fixture to the mounting plate using the provided screws.
3. Installing Glass Shades and Bulbs
Image: Detailed views of the fixture's components, including the glass shades and polished chrome accents.
Image: Bulb and dimming information for the Zura fixture, indicating E26 medium base and A19 frosted bulbs are recommended, and the fixture is dimmable with compatible switches.
- Insert Bulbs: Screw two E26 medium base bulbs into the sockets. The fixture is compatible with incandescent, CFL, or LED bulbs up to 100 watts each. Frosted A19 bulbs are recommended for optimal light diffusion.
- Attach Glass Shades: Carefully slide each etched opal glass shade over the bulb and secure it according to the fixture's design (typically with a retaining ring or screws). Ensure they are snug but do not overtighten.
Once installation is complete, restore power at the circuit breaker.
Operating Instructions
The Progress Lighting Zura Bath & Vanity Light Fixture is designed for simple operation.
- Power On/Off: Control the light fixture using a standard wall switch connected to the electrical circuit.
- Dimming Function: This fixture is dimmable. If you wish to use the dimming feature, ensure you have installed dimmable bulbs and a compatible wall dimmer switch.
Maintenance
Cleaning
- Fixture: To clean the polished chrome finish, wipe with a soft, damp cloth. Do not use abrasive cleaners or polishes, as they may damage the finish.
- Glass Shades: The etched opal glass shades can be cleaned with a mild glass cleaner and a soft cloth. Ensure the shades are cool before cleaning.
- Always ensure the power is off before cleaning any part of the fixture.
Bulb Replacement
- Disconnect Power: Before replacing bulbs, turn off the power at the circuit breaker.
- Allow to Cool: Allow old bulbs to cool completely before touching them.
- Remove Shades: Carefully remove the glass shades to access the bulbs.
- Replace Bulbs: Unscrew the old bulbs and screw in new E26 medium base bulbs, not exceeding 100 watts per bulb.
- Reattach Shades: Reinstall the glass shades securely.
- Restore Power: Turn the power back on at the circuit breaker.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Dimming function not working. |
|
|
Warranty and Support
Your Progress Lighting Zura Bath & Vanity Light Fixture is covered by a 1-year limited manufacturer's warranty. This warranty guarantees your satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims, technical assistance, or replacement parts, please contact Progress Lighting customer service. Refer to the contact information provided on the original packaging or visit the official Progress Lighting website.
Online Resources: For additional information and support, visit the Progress Lighting Store on Amazon.
