JERDON HL95WL Hardwired Wall-Mount Makeup Mirror Instruction Manual

Introduction

Thank you for choosing the JERDON HL95WL Hardwired Wall-Mount Makeup Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. This mirror features 5X magnification, integrated LED lighting, and a convenient wall-mount design with a pivot arm.

Please read these instructions thoroughly before installation and retain them for future reference.

Safety Information

CAUTION:

• This mirror is direct wire only and must be installed by a licensed electrician.
• Always turn off power at the circuit breaker before installation, maintenance, or any service.
• Be careful when extending or adjusting the mirror to avoid injury.
• Do not touch the mirror while it is plugged in or in use with wet hands.
• Keep away from water and heat sources to prevent damage or electrical hazard.

This product is intended for applying makeup or shaving.

Package Contents

Verify that all components are present before beginning installation:

• JERDON HL95WL Wall-Mount Makeup Mirror
• Wall mount hardware
• Instruction Manual

Setup and Installation

Professional installation by a licensed electrician is required for this hardwired mirror.

1. Turn Off Power: Locate the circuit breaker for the intended installation area and turn off the power supply. Verify that power is off using a voltage tester.
2. Choose Location: Select a suitable wall location with an existing junction box or where a new junction box can be safely installed. Ensure the location allows for full extension and rotation of the mirror.
3. Mount Wall Bracket: Secure the wall mount hardware to the junction box and wall studs as per local electrical codes and provided hardware.
4. Connect Wiring: Have a licensed electrician connect the mirror's wiring to the household electrical supply within the junction box, following all applicable electrical codes. Ensure all connections are secure and properly insulated.
5. Secure Mirror: Attach the mirror unit to the mounted wall bracket, ensuring it is firmly secured.
6. Restore Power: Once installation is complete and all connections are verified, restore power at the circuit breaker.

Operating Instructions

Your JERDON HL95WL mirror is designed for simple operation.

• Turning On/Off: The LED light is controlled by a wall switch connected during installation. Flip the switch to turn the light on or off.
• Adjusting the Mirror: The mirror is attached to a single pivot arm. Gently grasp the mirror frame and extend or retract it from the wall. The mirror head can also be tilted and rotated to achieve your desired viewing angle.

Maintenance

Proper care will ensure the longevity and performance of your mirror.

• Cleaning the Mirror: Use a soft, lint-free cloth and a mild glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror surface, to avoid liquid seeping into the electrical components.
• Cleaning the Frame: Wipe the chrome trim and white finish with a soft, damp cloth. Avoid abrasive cleaners or solvents, as they may damage the finish.
• LED Lights: The integrated LED lights are designed for long-lasting performance and typically do not require replacement.

Troubleshooting

If you encounter issues with your mirror, refer to the following common solutions:

• Light Does Not Turn On:
  • Ensure the wall switch is in the 'ON' position.
  • Check your household circuit breaker to ensure power is supplied to the mirror.
  • If the issue persists, contact a licensed electrician to inspect the wiring connections.
• Mirror Feels Loose or Unstable:
  • Ensure the wall mount hardware is securely fastened to the wall and junction box.
  • Verify that the mirror unit is properly attached to the wall bracket.
  • If necessary, consult a professional for re-installation.

Specifications

Warranty and Support

This JERDON HL95WL mirror is protected under a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use.

For warranty claims, technical support, or replacement parts, please contact JERDON customer service. Keep your proof of purchase for warranty validation.

Manufacturer: Jerdon Products Inc.