1. Introduction
The Intex 28695E Solar Powered LED Floating Pool Light is designed to provide illumination for your swimming pool. This light features solar charging, automatic operation, and multiple lighting modes to enhance your pool environment.
Figure 1: Intex Solar Powered LED Floating Pool Light in a pool.
2. Safety Information
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
- Always supervise children around water and pool accessories.
- Do not attempt to open or modify the light unit. This may compromise its waterproof integrity and void the warranty.
- Ensure the solar panel is not obstructed during charging to prevent overheating.
- Keep the light away from sharp objects that could puncture its casing.
3. Package Contents
Verify that all components are present and undamaged upon opening the package.
- 1 x Intex 28695E Solar Powered LED Floating Pool Light
4. Setup
Follow these steps to prepare your floating pool light for use:
- Initial Charge: Before first use, place the light with the solar panel facing upwards in direct sunlight for a minimum of 8-10 hours. This ensures the internal battery is fully charged.
- Placement: Once charged, simply place the floating light into your swimming pool. Ensure it floats freely and the solar panel remains exposed to sunlight during the day for continuous charging.
Figure 2: Top view of the light, highlighting the solar panel.
Figure 3: Detail of the solar panel and control button.
5. Operating Instructions
The Intex 28695E light operates automatically and offers two distinct lighting modes:
- Automatic On/Off: The light is equipped with a sensor that automatically turns the light on at dusk and off at dawn, provided it has received sufficient solar charge during the day.
- Mode Selection: Use the button located near the solar panel to cycle through the lighting modes:
- Static White Mode: Provides a steady white light. This mode has an automatic 2-hour shut-off timer.
- Smooth Color-Changing Mode: Cycles through blue, green, red, and purple colors. This mode has an automatic 5-hour shut-off timer.
Figure 4: Demonstrating the color-changing capabilities of the light.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your floating pool light:
- Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, debris, or mineral deposits. A clean panel ensures efficient charging.
- Inspect for Damage: Regularly check the light for any cracks, punctures, or signs of water intrusion. If damage is found, discontinue use to prevent electrical hazards.
- Winter Storage: During colder months or when the pool is not in use, remove the light from the pool. Clean it thoroughly, ensure it is dry, and store it in a cool, dry place away from direct sunlight.
7. Troubleshooting
If you encounter issues with your Intex 28695E light, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge. | Ensure the solar panel receives direct sunlight for 8-10 hours during the day. Clean the solar panel to remove any obstructions. |
| Light turns off too quickly. | Low battery charge or mode timer activated. | Allow for a full day of charging. Note that Static White mode has a 2-hour timer and Color-Changing mode has a 5-hour timer. |
| Light is dim or flickers. | Low battery charge or dirty solar panel. | Ensure the light receives adequate sunlight for charging. Clean the solar panel. |
| Light gets stuck in the pool skimmer. | Current pulls light towards skimmer. | Reposition the light away from the skimmer opening. Consider using multiple lights for larger pools to distribute illumination. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 28695E |
| Light Source Type | LED (Light Emitting Diode) |
| Power Source | Solar Powered |
| Color Modes | Static White, Smooth Color-Changing (Blue, Green, Red, Purple) |
| Automatic Features | Auto-on at night, Auto-off at sunrise |
| Shut-off Timers | 2 hours (Static White), 5 hours (Color-Changing) |
| Material | Plastic |
| Light Output Maximum | 800 Lumens |
| Water Resistance Level | Water Resistant |
| Item Dimensions (L x W x H) | 6.6"L x 6.6"W x 4.3"H |
| Item Weight | 0.48 Kilograms |
9. Warranty
This Intex product is covered by a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for any warranty claims. For specific terms and conditions, refer to the warranty information provided with your product packaging or contact Intex customer support.
10. Support
For further assistance, technical support, or to inquire about replacement parts, please contact Intex customer service. Contact information can typically be found on the product packaging or on the official Intex website.
You may also visit the official Intex store for more information and products: Intex Store on Amazon.