ECHOGEAR MaxMotion TV Wall Mount EGLF2 Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your ECHOGEAR MaxMotion Full Motion TV Wall Mount, model EGLF2. This mount is designed to securely hold televisions ranging from 42 to 90 inches and weighing up to 125 lbs. Please read all instructions carefully before beginning installation.

Image: Front view of the ECHOGEAR MaxMotion TV Wall Mount EGLF2, showcasing its robust design and articulating arms.

2. Safety Information

WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact ECHOGEAR customer support.

• Do not install this product on walls that are not structurally sound.
• Ensure the mounting surface can support the combined weight of the mount and the television.
• Always use a stud finder to locate the center of wood studs.
• Drill pilot holes to the specified depth and diameter.
• Do not overtighten screws.
• This product is intended for indoor use only.
• Keep children and pets away during installation.

3. Package Contents

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact ECHOGEAR customer support.

• Wall Plate Assembly
• TV Brackets (2)
• Hardware Kit (various screws, washers, spacers for TV and wall mounting)
• Drilling Template
• Instruction Manual

4. Tools Required

The following tools are recommended for a successful installation:

• Stud Finder
• Drill
• Drill Bits (specific sizes for pilot holes, refer to drilling template)
• Level
• Phillips Head Screwdriver
• Socket Wrench (for lag bolts)
• Pencil
• Measuring Tape

5. Setup and Installation

5.1 Determine Wall Type and Location

This mount is compatible with 16"-24" wood studs, poured concrete, and concrete block walls. Do not install on drywall alone.

Image: Illustration of compatible wall types for installation, including wood studs, poured concrete, and concrete block.

5.2 Wall Plate Installation

1. Locate Studs: Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at your desired TV height. For concrete walls, mark your desired mounting points.
2. Position Template: Tape the included drilling template to the wall, aligning it with your marked stud centers or concrete mounting points. Use a level to ensure it is perfectly horizontal.


Image: A person drilling pilot holes into a wall using the provided ECHOGEAR drilling template for accurate placement.

3. Drill Pilot Holes: Drill pilot holes through the marked points on the template. Refer to the template for specific drill bit sizes and depths for your wall type.
4. Attach Wall Plate: Align the wall plate with the drilled holes. Secure it to the wall using the provided lag bolts and washers. Tighten the lag bolts firmly, but do not overtighten.

5.3 TV Bracket Attachment

1. Identify VESA Pattern: Locate the mounting holes on the back of your TV. Measure the horizontal and vertical distance between these holes to determine your TV's VESA pattern. The EGLF2 mount supports various VESA patterns.
2. Select Hardware: Choose the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern and depth.
3. Attach Brackets: Secure the two TV brackets to the back of your television. Ensure the brackets are centered and level. Do not overtighten the screws.

5.4 Mounting the TV

1. Lift TV: With assistance, carefully lift the television and hook the TV brackets onto the arms of the wall plate assembly.
2. Secure TV: Once the TV is securely hooked, engage any safety locking mechanisms on the TV brackets to prevent accidental dislodgement.

6. Operating the Mount

The ECHOGEAR MaxMotion mount offers full adjustability for optimal viewing.

6.1 Extension and Retraction

Gently pull the TV away from the wall to extend the mount up to 22 inches. Push the TV back towards the wall to retract it to a minimum distance of 2.4 inches from the wall.

Image: Visual representation of the mount's extension capability (up to 22 inches) and its slim profile when retracted (2.36 inches from the wall).

6.2 Swivel Adjustment

The mount allows for up to 130 degrees of swivel (65 degrees left or right, depending on TV size and wall position). Gently pivot the TV to achieve your desired viewing angle.

Image: A television mounted on the ECHOGEAR MaxMotion mount, demonstrating its ability to swivel up to 130 degrees for flexible viewing.

6.3 Tilt Adjustment

The mount features tool-free tilt adjustment, allowing you to tilt your TV up or down by up to 15 degrees to reduce glare or optimize viewing from different heights.

Image: Close-up of the mount's mechanism, highlighting the tool-free tilt function that allows for up to 15 degrees of vertical adjustment.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your TV mount.

• Periodic Inspection: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
• Cleaning: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Movement: Ensure the articulating arms move smoothly. If movement becomes stiff, check for obstructions or contact support.

8. Troubleshooting

If you encounter issues during or after installation, refer to the following common problems and solutions:

• TV is not level: The mount includes a post-installation leveling feature. Gently rotate the TV to adjust its horizontal alignment.
• Mount feels loose: Recheck all wall plate lag bolts and TV bracket screws. Ensure they are tightened securely according to the instructions. Do not overtighten.
• Difficulty moving the TV: Ensure no cables are snagged or obstructing movement. Check that the mount's arms are not binding.
• Missing parts: Do not proceed with installation. Contact ECHOGEAR customer support immediately for replacement parts.

9. Specifications

Image: Illustration highlighting the mount's capacity for TVs up to 90 inches and its heavy-gauge steel construction, capable of holding up to 125 lbs.

10. Warranty and Support

ECHOGEAR stands behind the quality of its products. For specific warranty details, please refer to the product packaging or the official ECHOGEAR website.

If you require assistance with installation, troubleshooting, or have any questions about your ECHOGEAR MaxMotion TV Wall Mount, our Minnesota-based support team is available 7 days a week.

Contact Support: Refer to the contact information provided on the ECHOGEAR website or product packaging.

Image: Graphic indicating ECHOGEAR's Minnesota design origin and availability of product support 7 days a week.