Amazon Basics UPS Battery Backup & Surge Protector 800VA/450W User Manual

1. Product Overview

The Amazon Basics 800VA/450W Standby Uninterruptible Power Supply (UPS) with 12 Outlets provides essential power protection for your electronic devices. It features both battery backup and surge protection, ensuring your equipment remains operational during short power outages and is safeguarded against power surges.

This unit is ideal for home networks, IoT devices, and home entertainment systems, offering a compact design that integrates easily into any office or home environment.

Figure 1: Top-down view of the Amazon Basics 800VA UPS, highlighting the 12 outlets and power button.

Key Features:

• 800VA / 450W Battery Backup: Provides temporary power during outages, allowing safe shutdown of connected devices.
• 12 Outlets Total: Includes 6 surge-protected outlets and 6 surge-protected/battery-backup outlets (NEMA 5-15R).
• Surge Protection: Safeguards electronic devices from damaging power surges.
• Compact Design: Easily fits into various home or office setups.
• 5-foot Power Cord: Features a NEMA 5-15P right-angle and 45-degree offset plug for convenient placement.

2. Setup Instructions

Follow these steps to set up your Amazon Basics UPS unit:

1. Initial Charging: Before first use, plug the UPS into a standard wall outlet for at least 8 hours to ensure the internal battery is fully charged. This is crucial for optimal battery backup performance.
2. Placement: Position the UPS in a stable location. Avoid lying or mounting the UPS on its side, as this can affect battery life and performance.

Figure 2: Important placement instruction: Do not lie the UPS on its side.
3. Connect Devices:
   • Battery Backup & Surge Protection Outlets: Plug critical devices such as computers, monitors, routers, and modems into the 6 outlets labeled for "Battery Backup & Surge Protection." These outlets will provide power during an outage.
   • Surge Protection Only Outlets: Plug non-critical devices that only require surge protection into the 6 outlets labeled "Surge Protection." These outlets will not provide battery power during an outage.
4. Power On: After the initial charge and connecting your devices, press and hold the power button for 2 seconds to turn the UPS on. A green indicator light should illuminate.

3. Operating Instructions

Powering On/Off:

• To turn on the UPS, press and hold the power button for approximately 2 seconds.
• To turn off the UPS, press and hold the power button for approximately 2 seconds.

Understanding Outlets:

Figure 3: Detailed view of the UPS outlets, distinguishing between surge-only and battery-backed outlets.

• The UPS features two distinct sets of outlets: 6 for surge protection only and 6 for both battery backup and surge protection.
• Ensure that devices requiring continuous power during an outage are connected to the battery-backed outlets.

Power Outage Operation:

• During a power outage, the UPS will automatically switch to battery power for connected devices.
• The runtime varies based on the power consumption of connected devices. At half load (400VA/225W), the UPS provides approximately 12 minutes of backup power. At full load (800VA/450W), it provides approximately 2 minutes of backup power.
• An audible alarm will sound to indicate that the unit is operating on battery power. This alarm can typically be silenced by a short press of the power button, as detailed in the full instruction manual.

4. Maintenance

• Battery Life: To ensure long battery life, avoid lying or mounting the UPS on its side.
• Load Management: For optimal system performance, keep the total load below 80% of the unit's rated capacity (450W). Overloading the unit can reduce battery life and efficiency.
• Battery Replacement: The internal battery is replaceable. Refer to the full product guide for instructions on how to safely replace the battery when its performance degrades.
• Cleaning: Keep the unit clean and free from dust. Use a dry cloth to wipe the exterior. Do not use liquid cleaners.

5. Troubleshooting

• No Power to Devices (Battery-Backed Outlets): Ensure the UPS is turned on by pressing and holding the power button for 2 seconds. Verify the UPS is plugged into a live wall outlet and has been charged for at least 8 hours initially.
• Overload Indication: If the unit is overloaded, it may shut down or trigger a reset switch. Reduce the number of connected devices or their power consumption. The unit has a reset button on the side if it trips due to overload.
• Constant Beeping: A continuous or frequent beeping sound typically indicates the UPS is operating on battery power during an outage or that the battery is low. Refer to the full manual for specific alarm patterns and silencing instructions.
• Power Management Software: If experiencing issues with computer connectivity or automatic shutdown features, ensure the power management software is correctly installed and configured. This software is available for download from the product's official support page.

6. Specifications

Figure 4: Physical dimensions of the Amazon Basics 800VA UPS.

Runtime Estimates:

• At half load (400VA/225W): Approximately 12 minutes
• At full load (800VA/450W): Approximately 2 minutes

7. Warranty and Support

Warranty Information:

The Amazon Basics UPS Battery Backup & Surge Protector is backed by an Amazon Basics limited 1-year warranty, which includes the battery. Additionally, it comes with a $75,000 Connected Equipment Guarantee.

Power Management Software:

Power management software is available for download to enhance the functionality of your UPS, particularly for computer systems. This software can be found in the "Product guides and documents" section on the Amazon product page or the Amazon Basics support website.

Additional Support:

For further assistance, refer to the complete user manual included with your product or visit the official Amazon Basics support resources online.