HQRP 884667807031722

HQRP Humidifier Wick Filter Instruction Manual

Compatible with Kenmore Humidifiers

1. Overview

This manual provides essential information for the proper installation, maintenance, and replacement of your HQRP Humidifier Wick Filter. These filters are designed to work with compatible Kenmore humidifier models, ensuring efficient operation and improved air quality.

2. Product Features

  • Effective Filtration: Designed to capture impurities and minerals from water, preventing their release into the air.
  • Optimal Humidity Output: Features high absorbency to ensure efficient moisture evaporation and consistent humidity levels.
  • Reinforced Design: Constructed with a reinforced structure, including aluminum, to maintain shape and enhance durability and efficiency over time.
  • Dimensions: Each filter measures approximately 6 1/4 inches x 11 inches x 2 inches.
HQRP Humidifier Wick Filter (6-Pack)

Figure 1: A stack of six HQRP humidifier wick filters, showcasing their corrugated design.

HQRP Humidifier Wick Filter with Aluminum Reinforcement

Figure 2: Close-up view of the HQRP wick filter, highlighting the internal aluminum reinforcement for structural integrity.

3. Compatibility

The HQRP Wick Filter is compatible with the following Kenmore humidifier models and their equivalents:

  • Kenmore 29974
  • Kenmore 299740
  • Kenmore 29962
  • Kenmore 758.299772C
  • Kenmore 758.144131
  • Kenmore 758.144510
  • Kenmore 758.14451

It also replaces Emerson HDC-2R and HDC-411, and Sears Kenmore 14909 and 14912 filters.

4. Installation Instructions

Follow these general steps to replace the wick filter in your compatible humidifier. Always refer to your specific humidifier's user manual for detailed instructions.

  1. Power Off: Unplug the humidifier from the power outlet.
  2. Access Filter: Remove the water tank and any covers or components necessary to access the filter compartment.
  3. Remove Old Filter: Carefully remove the old, used wick filter. Dispose of it properly.
  4. Install New Filter: Place the new HQRP wick filter into the designated slot. Ensure it is seated correctly and securely.
  5. Reassemble: Reattach any covers or components that were removed. Refill the water tank with clean water.
  6. Power On: Plug the humidifier back into the power outlet and resume operation.
HQRP Humidifier Wick Filter absorbing water

Figure 3: An HQRP wick filter demonstrating its water absorption capability, crucial for effective humidification.

5. Maintenance

Regular filter replacement is crucial for maintaining your humidifier's performance and ensuring clean, healthy humidification.

  • Replacement Frequency: Replace your HQRP wick filter every 2 to 3 months.
  • Factors Affecting Life: The actual lifespan of the filter can vary depending on usage frequency, local water hardness, and air quality. Hard water will cause mineral buildup more quickly, necessitating more frequent replacement.
  • Visual Inspection: Regularly inspect the filter for signs of mineral buildup, discoloration, or hardening. Replace it immediately if these signs are present.

6. Troubleshooting

If you experience issues with your humidifier after filter replacement, consider the following:

  • Low Humidity Output: Ensure the filter is fully saturated with water. If the filter is old or heavily calcified, replace it. Check that the humidifier fan is operating correctly.
  • Unpleasant Odor: An odor can indicate bacterial growth or mold. Replace the filter and thoroughly clean the humidifier's water tank and base with a suitable cleaning solution.
  • Filter Not Absorbing Water: Ensure the filter is correctly installed and fully submerged in the water reservoir. If the filter is new and still not absorbing, check for any packaging that might be obstructing water flow.
Benefits of proper humidification

Figure 4: Visual representation of the positive effects of maintaining optimal indoor humidity levels.

7. Specifications

AttributeDetail
ManufacturerHQRP
Item Model Number884667807031722
Approximate Dimensions (each filter)6 1/4" x 11" x 2"

8. Warranty and Support

HQRP stands by the quality of its products.

  • DOA Replacement Warranty: This product includes a 2-week Dead On Arrival (DOA) replacement warranty.
  • Return Policy: A 30-day return policy for refund or replacement is available.

For further assistance, technical support, or warranty claims, please contact HQRP directly through their official channels.

Related Documents - 884667807031722

Preview Labrie Vehicle Options and Accessories Catalog
Comprehensive catalog detailing available options, accessories, and specifications for Labrie vehicles, including pricing for various components and configurations.