Introduction
This SLLEA AC/DC Adapter is designed to provide reliable power to your Lorex Technology LH040400 DVR Home Security System. It converts standard AC wall power to the appropriate DC power required by your device, ensuring stable operation.
Package Contents
- 1 x SLLEA AC/DC Power Adapter
- 1 x Power Cord
Image: The SLLEA AC/DC Power Adapter, a black rectangular unit, is shown connected to its black power cord, which is coiled beside it. This image illustrates the complete product package.
Safety Information
- Ensure the adapter's output voltage and connector tip match the requirements of your Lorex LH040400 DVR before connecting. Incorrect voltage or tip may damage your device.
- This adapter is designed for indoor use only. Do not expose to water, moisture, or extreme temperatures.
- Do not attempt to open or modify the adapter. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- The adapter features Over Voltage Protection and Over Heat Protection for enhanced safety.
Setup
- Verify Compatibility: Before connecting, confirm that the specifications of this SLLEA AC/DC adapter (input/output voltage, current, and connector type) are compatible with your Lorex Technology LH040400 DVR Home Security System. Refer to your DVR's manual for its power requirements.
- Connect to DVR: Insert the DC output plug of the SLLEA adapter firmly into the power input port of your Lorex LH040400 DVR.
- Connect to Power Outlet: Plug the AC power cord into the adapter, then insert the other end of the AC power cord into a standard 100-240 VAC 50/60Hz wall outlet.
- Power On: Once connected, your Lorex DVR should receive power. Refer to your DVR's manual for specific power-on procedures.
Operating Instructions
The SLLEA AC/DC Adapter operates automatically once connected to a power source and your device. It provides continuous power to your Lorex LH040400 DVR. No user interaction is required for its basic operation.
For optimal performance, ensure the adapter is placed in a well-ventilated area, away from direct sunlight or heat sources.
Maintenance
- Cleaning: Disconnect the adapter from both the power outlet and the DVR before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use for extended periods, disconnect the adapter and store it in a cool, dry place. Avoid tightly coiling the cables to prevent damage.
- Inspection: Periodically inspect the adapter and cables for any signs of damage, such as frayed wires or cracked casing. If damage is observed, discontinue use and replace the adapter.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| DVR not powering on | Adapter not connected properly | Ensure all connections (adapter to DVR, adapter to wall outlet) are secure. |
| Wall outlet not active | Test the wall outlet with another device to confirm it has power. | |
| Incorrect adapter specifications | Verify the adapter's output matches the DVR's power requirements. | |
| Adapter feels excessively hot | Poor ventilation or overload | Ensure the adapter is in a well-ventilated area. Disconnect and allow to cool. If overheating persists, discontinue use. |
Specifications
- Model: SLLEA AC/DC Adapter (for Lorex LH040400)
- Input: 100 - 240 VAC, 50/60Hz (Worldwide Voltage Use)
- Safety Features: Over Voltage Protection, Over Heat Protection
- UPC: 723044648822
Warranty and Support
SLLEA provides the following warranty for this product:
- Money Back Guarantee: 30 Days from purchase date.
- Free Exchange: 60 Days with paid return label.
- Worry-Free Warranty: 360 Days for any manufacturing defects or issues.
For any questions, concerns, or warranty claims, please contact SLLEA customer support. Refer to your purchase documentation or the SLLEA official website for contact information.