AMIR 4330175710

AMIR Upgraded LED Strip Lights, Model 4330175710 User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AMIR Upgraded LED Strip Lights, Model 4330175710. Please read this manual thoroughly before use to ensure proper functionality and safety.

Package Contents

  • 1 x RGB LED Light Strip (3.3ft / 39.6 inches)
  • 1 x Remote Control
  • 1 x User Manual

Product Features

  • Versatile Lighting: Offers 20 distinct colors and 19 dynamic lighting modes for various ambiance settings.
  • Convenient Control: Includes a 10-key RF wireless remote control with an effective reception distance of 8 meters for easy color, mode, brightness, and speed adjustments.
  • Durable Design: Features IP65 waterproof rating and is constructed from superior materials (Metal, Vinyl) for low heat emission and good toughness, allowing bending into desired shapes.
  • USB Powered: Designed for easy power connection via any standard USB port, suitable for TVs, desktop PCs, and other devices.
  • Customizable Length: The 39.6-inch LED strip can be cut along designated marks (white lines) to fit various device sizes (e.g., 32 to 46-inch TVs).
  • Easy Installation: Equipped with strong double-sided adhesive for simple peel-and-stick application.

Setup Instructions

Follow these steps for proper installation of your LED strip lights:

  1. Prepare the Surface: Ensure the back of your device (e.g., TV, monitor) is clean and dry. Use a wet towel to clean and allow it to dry naturally.
  2. Apply Adhesive: Carefully tear off the backing from the double-sided adhesive tape on the LED strip.
  3. Position the Strip: Paste the LED strip to your desired location on the back of the device. Press firmly along the strip to ensure good adhesion.
  4. Connect Power: Insert the USB plug of the light strip into a compatible USB port on your device or a USB power adapter.
Four-step diagram showing how to install the LED strip lights: 1. Clean the back of the TV. 2. Tear off the double-sided tape. 3. Paste the strip. 4. Connect the USB port.

Figure 1: Step-by-step installation guide for the LED strip lights.

Customizing Length

If the LED strip is too long for your application, you can shorten it by cutting along the designated cut marks. These marks are typically indicated by white lines or copper pads on the strip. Use sharp scissors for a clean cut.

Image showing a hand cutting the LED strip with scissors at a designated cut mark, and a coiled LED strip demonstrating its flexibility.

Figure 2: Instructions for cutting the LED strip to adjust its length and its flexible design.

Operating Instructions

The AMIR LED Strip Lights are controlled using the included 10-key RF wireless remote. Ensure the remote has a working CR2032 battery installed.

Remote Control Functions:

  • ON/OFF Button: Powers the lights on or off.
  • Color Buttons: Select from 20 static colors.
  • MODE +/- Buttons: Cycle through 19 dynamic lighting modes.
  • BRIGHT +/- Buttons: Adjust the brightness level of the lights.
  • SPEED +/- Buttons: Adjust the speed of dynamic lighting modes.
Diagram of a 10-key RF wireless remote control with buttons for ON/OFF, Green Color, Static Color Adjusting, Dynamic Mode Adjusting, Dynamic Speed Adjusting, and Brightness Adjusting. It also highlights the advantage of RF remote over IR remote.

Figure 3: 10-Key RF Wireless Remote Control layout and functions.

Visual Demonstration:

Video 1: Official product video demonstrating the AMIR Upgraded LED Strip Lights in various colors and modes, showcasing their application as TV backlighting.

Maintenance

To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:

  • Cleaning: Gently wipe the LED strip with a dry, soft cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners.
  • Storage: If storing the lights, ensure they are coiled loosely and kept in a dry, cool place away from direct sunlight.
  • Adhesive Care: If the adhesive begins to weaken over time, ensure the surface is clean and dry before re-applying or consider using additional mounting clips for support.

Troubleshooting

If you encounter issues with your AMIR LED Strip Lights, refer to the following common problems and solutions:

  • Lights Not Turning On:
    • Ensure the USB cable is securely connected to a powered USB port.
    • Verify the USB power source is functioning correctly (e.g., try a different USB port or adapter).
    • Check if the ON/OFF button on the remote has been pressed.
  • Remote Control Not Responding:
    • Replace the CR2032 battery in the remote control.
    • Although it's an RF remote, ensure there are no major obstructions or strong interference sources between the remote and the LED strip's receiver.
  • Adhesive Not Sticking:
    • Ensure the installation surface was thoroughly cleaned and dried before application.
    • For porous or textured surfaces, the adhesive may be less effective. Consider using additional adhesive clips or tape for better security.
  • Inaccurate White Color:
    • The

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.