Product Overview
The GATEMAN Shine Digital Glass Lock is an advanced security solution designed for glass doors, featuring a sleek, modern aesthetic combined with robust functionality. This lock integrates a Magic Mirror keypad, a secure thumb-turn mechanism, and various safety features to enhance security and user convenience.
Figure 1: Front view of the GATEMAN Shine Digital Glass Lock, showcasing its sleek design and keypad.
Key Features
- Magic Mirror Keypad: The keypad numbers become visible on the mirror surface only when touched, enhancing security by concealing the numbers when not in use. This also allows users to check the rear for added awareness.
- Safe Thumb-turn: Requires simultaneous pressing of two safety buttons to operate, preventing unauthorized manipulation from the inside.
- Modern & Thin Design: A solid, low-profile surface-mounted design that complements contemporary aesthetics.
- High Temperature Alarm: Activates an alarm and automatically releases the lock status in case of high internal temperatures, indicating a potential fire.
- Emergency Power Supply: Provides an external power option in case of complete battery depletion.
Figure 2: The Magic Mirror keypad in operation, displaying numbers upon touch.
Product Components
The GATEMAN Shine Digital Glass Lock package includes the following components:
- Front Body (Outer Body w/ U-Frame)
- Back Body (Inner Body)
- Strike Holder
- TagKey (4 pieces)
- English User Guide
- Magnetic Sensor for Auto-locking
- Fixing Plate (or Fixing Pad)
- Bolts
- Installation Template
Figure 3: Illustrated diagram of all included product components.
Setup and Installation
Before beginning installation, ensure you have all components listed in the "Product Components" section. Refer to the included English User Guide for detailed, step-by-step installation instructions and diagrams.
Battery Installation
The lock requires 4 AA batteries for operation. Install them into the battery compartment located on the inner body of the lock. Ensure correct polarity. The lock will indicate a low battery status when replacement is needed.
Mounting on Glass Doors
The lock is designed for glass doors and utilizes a clip-type bracket for secure installation. A strong double-sided tape is used to affix the bracket. The optional Strike Holder is also part of the installation for proper alignment and security.
Figure 4: The GATEMAN Shine Digital Glass Lock mounted on a glass door.
Figure 5: Details of the Clip Type Bracket for installation and the lock's slim profile.
Operating Instructions
Unlocking with Keypad
- Touch the Magic Mirror keypad to activate the numbers.
- Enter your registered PIN code.
- Press the '*' or '#' key (refer to specific manual for exact key) to confirm. The lock will disengage.
Unlocking with TagKey
- Place a registered TagKey on the card reader area of the lock.
- The lock will disengage upon successful recognition.
Locking
The lock features an auto-locking mechanism. When the door is closed and aligned with the magnetic sensor, the lock will automatically engage. Manual locking options may also be available; consult the full English User Guide for details.
Using the Safe Thumb-turn
To operate the thumb-turn from the inside, simultaneously press the two safety buttons located on the thumb-turn knob, then rotate the knob to lock or unlock the door. This design prevents accidental or forced manipulation.
Maintenance
To ensure optimal performance and longevity of your GATEMAN Shine Digital Glass Lock, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the lock's surface. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
- Battery Replacement: Replace all 4 AA batteries promptly when the low battery alarm sounds. Using fresh, high-quality alkaline batteries is recommended. Do not mix old and new batteries or different battery types.
- Avoid Force: Do not apply excessive force to the keypad or the thumb-turn. Operate the lock gently.
- Environmental Conditions: While designed for durability, avoid exposing the lock to extreme temperatures or direct water spray.
Troubleshooting
This section addresses common issues you might encounter with your GATEMAN Shine Digital Glass Lock.
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad not responding / Numbers not appearing. | Batteries are low or depleted. | Replace all 4 AA batteries. If completely depleted, use the emergency power supply feature. |
| Lock does not engage automatically. | Magnetic sensor misalignment or obstruction. | Check the alignment of the magnetic sensor on the door frame and the lock. Ensure no obstructions are preventing proper contact. |
| High Temperature Alarm sounds. | Internal temperature exceeds safe limits. | This is a safety feature. The lock will automatically release. Investigate the source of the high temperature (e.g., fire). |
| Lock is unresponsive after power loss. | Batteries are completely dead. | Utilize the emergency power supply feature (e.g., 9V battery connection point) to temporarily power the lock and gain entry. Then replace the internal AA batteries. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | GATEMAN |
| Model Number | 8809500520269 |
| Lock Type | Keypad |
| Material | Glass |
| Dimensions (L x W x H) | 11 x 7 x 9 inches |
| Item Weight | 4.04 pounds |
| Power Source | Battery Powered |
| Batteries Required | 4 AA batteries |
| Special Features | Alarm, Magic Mirror Keypad, Safe Thumb-turn |
| Recommended Uses | Home/Office Doors |
| Color | Black |
Warranty and Support
For detailed warranty information and technical support, please refer to the official English User Guide included with your product. This guide contains specific contact information and procedures for obtaining assistance.
It is recommended to keep your purchase receipt and product packaging for any warranty claims or support inquiries.
