Product Overview
The Brita Longlast Replacement Water Filter (Model OB07) is designed to provide cleaner, great-tasting water by reducing contaminants. This filter is compatible with all Brita pitchers and dispensers, offering a filtration capacity of approximately 120 gallons or up to 6 months of use, whichever comes first. It is certified to reduce 99% of lead, along with other impurities such as chlorine (taste and odor), cadmium, and mercury.
Image: A blue Brita Longlast replacement water filter, designed for use with Brita pitchers and dispensers. The filter features a cylindrical body with a conical top section and visible Brita branding.
Setup Instructions
- Unpack the Filter: Remove the new Brita Longlast filter from its packaging.
- Prepare the Filter: Rinse the filter under cold tap water for 15 seconds. This helps to remove any loose carbon particles and prepares the filter for use.
- Insert into Pitcher: Align the groove on the filter with the ridge in the pitcher's reservoir. Press the filter firmly into the reservoir until it clicks into place. Ensure a snug fit to prevent unfiltered water from bypassing the filter.
- Initial Fills: Fill the pitcher with cold tap water. Discard the first two full pitchers of filtered water. This flushes out any remaining carbon dust and primes the filter for optimal performance.
- Reset Filter Indicator: If your Brita pitcher has an electronic filter indicator, press and hold the reset button for approximately 5 seconds until the light flashes or changes color, indicating a successful reset. Refer to your pitcher's specific manual for detailed instructions on resetting its indicator.
Operating the Filter
Once installed, the Brita Longlast filter operates automatically as water passes through it. Simply fill your Brita pitcher or dispenser with tap water, and the filter will begin the purification process.
- Filtration Speed: The Longlast filter is designed for thorough filtration, which may result in a slightly slower flow rate compared to standard filters. This is normal and indicates effective contaminant reduction.
- Filter Life: The filter is designed to last for approximately 120 gallons of water or up to 6 months, whichever comes first. This duration can vary based on water quality and usage.
- Water Temperature: Use only cold tap water with your Brita filter. Hot water can damage the filter and reduce its effectiveness.
Maintenance and Replacement
Regular maintenance ensures optimal performance and water quality.
- When to Replace: Replace your Brita Longlast filter every 6 months or after filtering 120 gallons of water. Your pitcher's electronic filter indicator (if equipped) will signal when a replacement is due.
- Disposing of Old Filters: Brita filters are recyclable in some areas. Check with your local recycling facilities for proper disposal methods. Do not dispose of filters in regular household waste if recycling is available.
- Cleaning Your Pitcher: Periodically clean your Brita pitcher or dispenser according to its specific instructions. Most components are dishwasher-safe (top rack only) or can be hand-washed with mild detergent. Remove the filter before cleaning the pitcher.
Troubleshooting
- Slow Filtration: If water filters very slowly, ensure the filter is properly seated in the reservoir. If the issue persists, the filter may be nearing the end of its life or your tap water may contain high levels of sediment. Try rinsing the filter again or replacing it if it's old.
- Unusual Taste or Odor: If filtered water has an unusual taste or odor, ensure the filter was properly rinsed and primed (discarding the first two pitchers). If the problem continues, replace the filter.
- Filter Not Fitting: Ensure you have the correct Brita filter model for your pitcher. The Longlast filter (Model OB07) is designed for Brita pitchers and dispensers. If it still doesn't fit, check for any obstructions in the reservoir or contact customer support.
- Filter Indicator Not Resetting: Refer to your pitcher's specific manual for instructions on resetting its filter indicator. If the issue persists, the indicator battery may need replacement (for some models) or there might be a malfunction with the pitcher's indicator system.
Specifications
| Feature | Detail |
|---|---|
| Model Number | OB07 |
| Material | Plastic |
| Filtration Capacity | 120 Gallons (approx.) |
| Filter Lifespan | Up to 6 Months |
| Contaminant Reduction | 99% Lead, Chlorine (taste & odor), Cadmium, Mercury |
| Certifications | NSF, WQA |
| Compatible Pitchers | All Brita Pitchers and Dispensers including Amalfi, Aqualux, Atlantis, Capri, Champlain, Chrome, Classic, Color Series, Deluxe, Denali, Everyday, Grand, Huron, Infinity, Lake, Marina, Metro, Mini Plus, Monterey, Pacifica, Slim, Soho, Space Saver, Stainless Steel, Tahoe, Ultramax, Wave |
| Item Weight | 1.76 ounces |
| Package Dimensions | 5.16 x 4.33 x 2.28 inches |
| ASIN | B073CBHPB1 |
| Date First Available | June 27, 2017 |
Warranty Information
Brita products are manufactured to high-quality standards. For specific warranty details regarding your Brita Longlast Replacement Water Filter, please refer to the product packaging or visit the official Brita website. Filters are typically covered against defects in materials and workmanship under normal household use.
Support and Contact
For further assistance, questions, or to purchase additional filters, please visit the official Brita website or contact their customer support.
- Brita Official Website: www.brita.com
- Customer Service: Refer to the website for contact numbers or online support options.
