Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your KICKER 43PXBTC Weather Proof Bluetooth Controller. Please read this manual thoroughly before using the device to ensure proper functionality and safety. Keep this manual for future reference.
Image: The KICKER 43PXBTC Weather Proof Bluetooth Controller, a compact black device with a central rotary knob featuring volume controls (+/-) and track navigation buttons (previous/next).
Safety Information
Always observe the following safety precautions:
- Ensure proper wiring and connections to prevent electrical shorts or damage.
- Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
- While the device is weather-proof, avoid submerging it in water.
- Consult a professional for installation if you are unsure about any steps.
Package Contents
Verify that all items are present in the package:
- KICKER 43PXBTC Bluetooth Controller
- Mounting Hardware (screws, brackets)
- Wiring Harness
- User Manual (this document)
Setup and Installation
Follow these steps for proper installation of your KICKER 43PXBTC controller.
Mounting the Controller
- Choose a suitable, easily accessible location on your Polaris RZR, ATV, UTV, or golf cart. Ensure the surface is flat and secure.
- Drill the necessary holes for mounting the controller using the provided template (if applicable) or by carefully marking the screw positions.
- Secure the controller using the supplied mounting hardware. Do not overtighten.
Wiring Connections
The 43PXBTC requires power, ground, and an audio output connection. Refer to the wiring diagram below for detailed connections.
- Red Wire: Connect to a switched +12V power source.
- Black Wire: Connect to a chassis ground.
- Blue Wire: Remote turn-on output for amplifier (if applicable).
- RCA Outputs: Connect to the audio input of your amplifier or head unit.
Ensure all connections are secure and insulated to prevent short circuits.
Operating Instructions
Learn how to use your KICKER 43PXBTC Bluetooth Controller.
Powering On/Off
- The unit powers on automatically when the +12V switched power source is active.
- To power off, turn off the vehicle's ignition or the connected power source.
Bluetooth Pairing
- Ensure the 43PXBTC is powered on.
- On your mobile device (smartphone, tablet), enable Bluetooth and search for available devices.
- Select "KICKER PXBTC" from the list of devices.
- Once paired, the LED indicator on the controller will confirm the connection (refer to LED indicator section for details).
Audio Control
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Next Track: Press the '>>|' button.
- Previous Track: Press the '|<<' button.
- Play/Pause: Press the central knob (if applicable, or refer to specific model functionality).
Maintenance
Proper maintenance ensures the longevity of your KICKER 43PXBTC controller.
- Cleaning: Use a soft, damp cloth to wipe down the controller. Avoid harsh chemicals or abrasive cleaners.
- Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- Storage: If storing the vehicle for an extended period, ensure the controller is powered off.
Troubleshooting
If you encounter issues with your KICKER 43PXBTC, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Loose power connection; Blown fuse; No +12V supply. | Check power and ground wires; Inspect and replace fuse if necessary; Verify +12V at the power source. |
| Cannot Pair Bluetooth | Controller not in pairing mode; Device too far; Interference. | Ensure controller is powered on; Move device closer; Restart both controller and mobile device. |
| No Audio Output | Incorrect RCA connections; Amplifier not powered on; Volume too low. | Verify RCA connections to amplifier; Check amplifier power; Increase volume on controller and connected device. |
| Intermittent Connection | Bluetooth range exceeded; Obstructions; Device interference. | Keep device within range; Minimize obstructions; Turn off other Bluetooth devices nearby. |
Specifications
Key technical specifications for the KICKER 43PXBTC Weather Proof Bluetooth Controller:
- Model: 43PXBTC
- Controller Type: Remote Control
- Color: Black
- Connectivity Technology: Auxiliary, Bluetooth
- Frequency Response: 20Hz-20KHz (-3dB)
- THD (250mV 1kHz, AUX input, 2.5V output): <0.01%
- S/N Ratio (AU-Weight) ref 5V, minimum volume: >100dB
- Is Waterproof: True
- Power Source: Vehicle Power (12V DC)
- Product Dimensions: 12.7 x 12.7 x 12.7 cm; 249 g
- Compatible Devices: Laptop, Smartphone, Tablet
Warranty Information
KICKER products are designed and engineered to provide years of trouble-free operation. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official KICKER website. Typically, KICKER offers a limited warranty against defects in materials and workmanship for a specified period from the original date of purchase.
Note: Warranty may be voided if the product is improperly installed, abused, or modified.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact KICKER customer support:
- Website: www.kicker.com
- Refer to the KICKER website for contact numbers and support hours specific to your region.
