Kuzco Lighting AT6510-BN Slate Outdoor LED Wall Lighting

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Kuzco Lighting AT6510-BN Slate Outdoor LED Wall Lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This fixture is designed for outdoor use and features a durable aluminum and glass construction with an integrated LED light source.

Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.

• All electrical connections must be in accordance with local and National Electrical Code (NEC) standards.
• Consult a qualified electrician if you are unsure about the installation process.
• Ensure the fixture is properly grounded.
• Do not install this fixture on surfaces that are not structurally sound.
• Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
• This fixture is wet-rated, suitable for outdoor use.
• The integrated LED is not replaceable. Do not attempt to open the LED module.

Package Contents

Verify that all components are present before beginning installation.

• LED Wall Sconce Fixture (Model AT6510-BN)
• Mounting Hardware Kit (screws, wire nuts, mounting plate)
• Instruction Manual

Specifications

Image: Kuzco Lighting AT6510-BN Slate Outdoor LED Wall Lighting, showing its dimensions of 9.88 inches in length, 9.88 inches in width, and 5.5 inches in height.

Setup and Installation

Tools Required (Not Included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

1. Turn Off Power: Before starting any electrical work, ensure the power supply to the junction box is turned off at the circuit breaker or fuse box.
2. Prepare Mounting Plate: Attach the mounting plate (included in hardware kit) to the junction box using the provided screws. Ensure the plate is securely fastened.
3. Make Electrical Connections:
   • Connect the fixture's black wire to the supply circuit's black (Live) wire.
   • Connect the fixture's white wire to the supply circuit's white (Neutral) wire.
   • Connect the fixture's ground wire (bare copper or green) to the supply circuit's ground wire and to the mounting plate's ground screw.
   • Secure all connections with wire nuts and wrap with electrical tape for added safety.
4. Mount the Fixture: Carefully align the fixture with the mounting plate and secure it using the provided screws. Ensure no wires are pinched during this process.
5. Seal (Outdoor Installation): For outdoor installations, apply a bead of weather-resistant sealant around the perimeter of the fixture where it meets the mounting surface to prevent water intrusion.
6. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

Operating Instructions

The Kuzco Lighting AT6510-BN fixture operates as a standard wall light once properly installed and powered.

• Turning On/Off: Use the wall switch connected to the fixture's circuit to turn the light on or off.
• Dimming Function: This fixture is compatible with TRIAC/ELV type dimmers. If a compatible dimmer switch is installed, you can adjust the light output by operating the dimmer control. Ensure your dimmer switch is rated for LED lighting.

Maintenance

The AT6510-BN LED wall light requires minimal maintenance.

• Cleaning: To clean the fixture, ensure power is off. Use a soft, damp cloth with a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads, as these can damage the finish or glass.
• LED Lifespan: The integrated LED has a long lifespan of approximately 50,000 hours. No bulb replacement is necessary.
• Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear, especially after severe weather conditions.

Troubleshooting

If troubleshooting steps do not resolve the issue, contact Kuzco Lighting customer support.

Warranty and Support

This Kuzco Lighting fixture is covered by a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

The warranty does not cover:

• Damage caused by improper installation or maintenance.
• Damage caused by misuse, abuse, accidents, or neglect.
• Damage from unauthorized repairs or modifications.
• Normal wear and tear.

For warranty claims or technical support, please contact Kuzco Lighting customer service. Keep your proof of purchase for warranty validation.

Contact Information: Please refer to the Kuzco Lighting official website or your purchase documentation for the most current contact details.