1. Introduction
This manual provides instructions for the safe and proper use of the Sole Fitness / Spirit / Xterra Right Angle AC Power Supply Cord, model E060001F. This power cord is designed as a replacement part for various fitness equipment models from Sole Fitness, Spirit, and Xterra. Please read this manual thoroughly before installation and use.
2. Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:
- Ensure the power cord is compatible with your equipment's power requirements before connecting.
- Do not use the power cord if it is damaged, frayed, or has exposed wires.
- Do not attempt to modify or repair the power cord. Contact a qualified technician if repair is needed.
- Keep the power cord away from water, heat sources, and sharp objects.
- Always grasp the plug, not the cord, when disconnecting from the power outlet or equipment.
- Ensure the power outlet is properly grounded.
- Unplug the power cord from the outlet when not in use or before cleaning the equipment.
3. Product Overview
The E060001F is an OEM right-angle C13 connector AC power supply cord. It is designed to provide power to compatible Sole Fitness, Spirit, and Xterra exercise equipment. The right-angle design helps to reduce strain on the cord and allows for closer placement of equipment to walls.
Image of the Sole Fitness / Spirit / Xterra Right Angle AC Power Supply Cord E060001F, showing its right-angle C13 connector.
4. Compatible Models
This power supply cord is compatible with the following fitness equipment models:
- Sole Fitness:
- 2014 Series - F85 (585812)
- 2014 Series - S77 (577812)
- 2014 Series - TT8 (588812)
- Spirit:
- Esprit - EL555 - 2010 (555009)
- Esprit - EL7 - 2007-2009
- Esprit - ET288 - 2010
- Esprit - ET388 - 2010
- Esprit - ET488 - 2010
- Esprit - ET588 - 2010
- Esprit - ET6 - 2007-2009
- Esprit - ET8 - 2007-2009
- Spirit Treadmill - CT800 - 2014
- Spirit X - XE395 - 2011-2012 (395010)
- Spirit X - XT185 - 2011-2012 (185810)
- Spirit X - XT285 - 2011-2012 (285810)
- Spirit X - XT385 - 2011-2012 (385810)
- Spirit X - XT485 - 2011-2012 (485810)
- Spirit X - XT685 - 2011-2012 (685810)
- Spirit X - XT10 - 2005-2010
- Spirit X - XT200 - 2005-2010
- Spirit X - XT275 - 2005-2010
- Spirit X - XT285 - 2005-2010
- Spirit X - XT375 - 2005-2010
- Spirit X - XT385 - 2005-2010
- Spirit X - XT485 - 2005-2010
- Spirit X - XT675 - 2005-2010
- Spirit X - XT9 - 2005-2010
- Xterra:
- Xterra - FS5.4e - 2013
- Xterra - FS5.6e - 2013
- Xterra - FS5.8e - 2013
- Xterra - FS5.9e - 2013
- Xterra Fitness - TR250 - 2010 (250809)
- Xterra Fitness - TR3.0 - 2014
- Xterra Fitness - TR350 - 2010 (350809)
- Xterra Fitness - TR450 - 2010 (450809)
- Xterra Fitness - TR550 - 2010 (550809)
- Xterra Fitness - TR6.2 - 2012 (162811)
- Xterra Fitness - TR6.3 - 2013
- Xterra Fitness - TR6.4 - 2013
- Xterra Fitness - TR6.45 - 2013
- Xterra Fitness - TR6.5 - 2011 (765810)
- Xterra Fitness - TR6.55 - 2012 (165811)
- Xterra Fitness - TR6.6 - 2013
- Xterra Fitness - TR6.65 - 2013
- Xterra Fitness - TR6.8 - 2013
- Xterra Fitness - TR600 - 2013
- XZ600
- Z Series Treadmill - Z500 - 2004-2006
Note: This list is based on available product information. Always verify compatibility with your specific equipment model before use.
5. Setup and Installation
- Verify Compatibility: Before connecting, ensure your fitness equipment requires a C13 type power cord and matches the voltage and current ratings of this cord.
- Power Off Equipment: Ensure your fitness equipment is turned off and any existing power cord is disconnected from both the equipment and the wall outlet.
- Connect to Equipment: Insert the right-angle C13 connector end of the power cord firmly into the power inlet port on your fitness equipment. The right-angle design should allow for a snug fit, often against a wall.
- Connect to Wall Outlet: Insert the standard Type A plug end of the power cord into a grounded electrical wall outlet.
- Secure Connection: Ensure both ends of the cord are securely connected and that the cord is not pinched or routed in a way that could cause damage or a tripping hazard.
6. Operating Instructions
Once the power cord is securely connected to both your fitness equipment and a grounded wall outlet, you can power on your equipment according to its manufacturer's instructions. The power cord simply facilitates the electrical connection.
7. Maintenance and Care
- Regular Inspection: Periodically inspect the power cord for any signs of wear, cuts, fraying, or damage. If damage is found, discontinue use immediately and replace the cord.
- Cleaning: Disconnect the power cord from the wall outlet and equipment before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water.
- Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cord to prevent internal damage.
- Avoid Strain: Do not pull, twist, or bend the cord excessively, especially near the connectors, as this can cause internal wire damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Equipment does not power on. |
|
|
| Power cord feels hot. |
|
|
9. Specifications
| Model Number | E060001F |
| Connector Type (Equipment End) | Right-Angle C13 (Female) |
| Connector Type (Wall End) | Type A (Male) |
| Total Power Outlets | 1 |
| UL Listed | No |
| Brand | Sole Fitness / Spirit / Xterra (Compatible) |
10. Support and Assistance
If you are uncomfortable with diagnosing or replacing parts for your fitness machine, it is recommended to consult a qualified fitness technician. For assistance in finding a technician in your area, please contact your equipment manufacturer or the retailer where you purchased the power cord.
For further product inquiries, please refer to the contact information provided by your retailer or the original equipment manufacturer.
