SuperATV LK-P-SPT11
SuperATV 2-inch Lift Kit for Polaris Sportsman
Model: LK-P-SPT11
Introduction
This manual provides essential information for the installation, operation, and maintenance of your SuperATV 2-inch Lift Kit for Polaris Sportsman models. This kit is designed to increase ground clearance and allow for larger tires on compatible Polaris Sportsman ATVs. Please read all instructions carefully before beginning installation to ensure proper fitment and safe operation.
Safety Information
- Always wear appropriate personal protective equipment, including safety glasses and gloves, during installation.
- Ensure the vehicle is securely supported on a flat, level surface using jack stands before beginning any work. Do not rely solely on a jack.
- Disconnect the battery before performing any electrical work, if applicable.
- Exercise caution when working with heavy components and springs.
- After installation, verify all fasteners are tightened to manufacturer specifications.
- Test the vehicle's handling and braking in a safe, controlled environment before regular use.
- Modifying your vehicle's suspension can alter its handling characteristics. Drive responsibly.
Package Contents
Verify that all components listed below are present in your kit before beginning installation.

Image: Overview of the SuperATV 2-inch Lift Kit components. This includes various bolts, nuts, shock spacers, and lift brackets for both front and rear suspension.
- Front Shock Spacers (2)
- Rear Lift Brackets (2)
- Assorted Bolts and Nuts for installation

Image: Close-up view of the zinc-plated shock spacers, which are a key component of the lift kit.
Compatibility
This SuperATV 2-inch Lift Kit is compatible with the following Polaris Sportsman models:
- Polaris Sportsman ETX: 2015
- Polaris Sportsman 450: 2016-2024
- Polaris Sportsman 570: 2015-2024
- Polaris Sportsman 500: 2011-2015
- Polaris Sportsman 600: 2011-2015
- Polaris Sportsman 700: 2011-2015
NOTE: This kit does not fit Sportsman Touring, SP, or Premium models. It is only compatible on machines with a front strut set-up.
Setup (Installation)
SuperATV has adopted a paperless approach for installation instructions. To access detailed, step-by-step installation guides for your new SuperATV product, please scan the QR code provided on your invoice using any smart device (tablet, smartphone, etc.). This method ensures you have instant and easy access to the most current instructions.
General steps typically involve:
- Safely lifting and securing the vehicle.
- Removing existing suspension components as necessary.
- Installing the front shock spacers.
- Installing the rear lift brackets.
- Reassembling and tightening all components.
- Performing a final inspection.
For visual assistance, many users find community-created installation videos helpful. Search online platforms for "SuperATV Polaris Sportsman 2 inch lift kit installation" for supplementary guides, but always prioritize the official instructions provided via the QR code.
Operating Considerations
After installing the 2-inch lift kit, your Polaris Sportsman will have increased ground clearance, which can enhance its off-road capabilities. This lift also allows for the installation of larger tires, further improving traction and obstacle clearance.

Image: A Polaris Sportsman ATV equipped with the 2-inch lift kit and aggressive off-road tires, showcasing the increased ride height from a side perspective.

Image: A front view of a Polaris Sportsman ATV after the 2-inch lift kit installation, highlighting the enhanced stance and tire clearance.
Be aware that lifting a vehicle can change its center of gravity, potentially affecting stability. Always operate your ATV safely and be mindful of the altered handling characteristics, especially when cornering or on uneven terrain. Ensure proper tire clearance, as some larger tire setups may still experience minor rubbing at full steering lock or suspension compression.
Maintenance
Regular inspection and maintenance are crucial for the longevity and safety of your lift kit and vehicle.
- Periodic Inspection: Regularly check all bolts, nuts, and brackets for tightness. Vibrations from off-road use can loosen fasteners over time.
- Cleanliness: Keep the lift kit components free from excessive mud, dirt, and debris. This helps prevent corrosion and allows for easier inspection.
- Damage Check: Inspect components for any signs of wear, cracks, or damage, especially after aggressive riding. Replace any damaged parts immediately.
- Alignment: After installing a lift kit, it is recommended to check and adjust your vehicle's alignment to ensure proper tire wear and handling.
Troubleshooting
- Fitment Issues: If components do not seem to fit, double-check the compatibility list against your specific Polaris Sportsman model and year. Ensure your vehicle has a front strut set-up.
- Missing Parts: In the event of missing hardware or components, contact SuperATV customer support immediately with your purchase details.
- Uneven Lift: If the vehicle appears uneven after installation, re-verify that all components are installed correctly and all fasteners are tightened uniformly. Some variations in lift height (e.g., front vs. rear) can occur depending on the specific vehicle setup and existing suspension wear.
- Unusual Noises: Any new noises (e.g., clunking, squeaking) after installation should be investigated promptly. This may indicate loose fasteners, improper installation, or interference with other vehicle components.
Specifications
| Feature | Detail |
|---|---|
| Brand | SuperATV |
| Model Number | LK-P-SPT11 |
| Lift Height | 2 inches (Front and Rear) |
| Material | Zinc Plated Steel (for extreme durability) |
| Item Weight | Approximately 3 pounds |
| Product Dimensions | Approximately 5 x 4 x 3 inches (packaging/kit components) |
| Position | Front and Rear |
Warranty and Support
For specific warranty information regarding your SuperATV 2-inch Lift Kit, please refer to the documentation included with your purchase or visit the official SuperATV website. SuperATV stands behind its products and offers support for any issues you may encounter.
If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact SuperATV customer service directly. Have your product model number (LK-P-SPT11) and purchase details ready for faster service.
You can typically find contact information on the SuperATV website: www.superatv.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.