Smartby RC032 Remote Control User Manual for COBY ATSC Converter Boxes DTV100, DTV101, DTV102, DTV103

1. Introduction

This manual provides instructions for the proper setup, operation, and maintenance of your Smartby RC032 Remote Control. This remote is specifically designed as a replacement for COBY ATSC Digital Converter Boxes, including models DTV100, DTV101, DTV102, and DTV103. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

2. Product Overview

The Smartby RC032 is a dedicated replacement remote control, engineered to function seamlessly with specified COBY ATSC converter box models. It offers direct functionality without requiring complex programming.

Smartby RC032 Remote Control, front view showing all buttons

Figure 1: Front view of the Smartby RC032 Remote Control. This image displays the ergonomic design and the layout of all functional buttons, including power, number pad, channel, volume, menu, and special function keys like GUIDE, Q.VIEW, SIGNAL, CCD, INFO, and CH-LIST. The model number "RC-032" is visible at the bottom.

Key Features:

Ready-to-Use: No programming required; functions immediately after battery installation.
Direct Replacement: Specifically designed to replace the original COBY RC-032 remote.
Broad Compatibility: Compatible with COBY DTV100, DTV101, DTV102, and DTV103 digital converter boxes.

3. Setup

3.1 Battery Installation

Locate the battery compartment on the back of the remote control.
Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
Insert two (2) AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. Incorrect insertion can prevent the remote from functioning.
Slide the battery compartment cover back into place until it clicks securely.

The remote control is now ready for use with your compatible COBY ATSC converter box.

4. Operating Instructions

The RC032 remote control provides full functionality for your COBY ATSC Digital Converter Box. Point the remote directly at the converter box for optimal signal transmission.

4.1 Basic Functions

Power (⑆): Turns the converter box on or off.
Number Pad (0-9): Directly enter channel numbers.
CH ▲ / ▼: Changes the channel up or down sequentially.
VOL ▲ / ▼: Adjusts the volume level.
MUTE: Mutes or unmutes the audio output.
MENU: Accesses the main menu of the converter box for settings and options.
ENTER: Confirms selections within menus.
EXIT: Exits the current menu or screen.
Arrow Keys (◄ ▲ ▼ ►): Navigate through menus and options.

4.2 Advanced Functions

AUDIO: Selects audio tracks or modes.
ZOOM: Adjusts the screen zoom level.
GUIDE: Displays the electronic program guide (EPG).
Q.VIEW: Quickly switches between previously viewed channels.
SIGNAL: Displays signal strength information.
CCD (Closed Captioning Decoder): Toggles closed captions on or off.
INFO: Displays current program information.
CH-LIST: Accesses the channel list.

5. Maintenance

5.1 Cleaning

To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the remote's surface or internal components.

5.2 Battery Replacement

Replace batteries when the remote's response becomes inconsistent or stops working. Always replace both batteries at the same time with new ones of the same type (AAA). Remove batteries if the remote will not be used for an extended period to prevent leakage.

6. Troubleshooting

Problem	Possible Cause	Solution
Remote is not responding.	Dead or incorrectly inserted batteries. Obstruction between remote and converter box. Remote control sensor on converter box is blocked.	Replace batteries, ensuring correct polarity. Remove any objects blocking the line of sight. Ensure the converter box's IR sensor is clear.
Buttons are unresponsive or sticky.	Dirt or debris under buttons. Worn-out internal contacts.	Clean the remote surface. If cleaning does not resolve the issue, the remote may need replacement.
Remote works intermittently.	Low battery power. Interference from other electronic devices.	Replace batteries. Ensure no strong light sources or other IR devices are interfering.

7. Specifications

Feature	Detail
Model Number	RC032
Brand	Smartby
Compatibility	COBY ATSC Converter Box DTV100, DTV101, DTV102, DTV103
Connectivity Technology	Infrared (IR)
Power Source	2 x AAA Batteries (not included)
Item Weight	2.25 ounces (approximately 63.79 grams)
Package Dimensions	6.5 x 2.6 x 1.3 inches (approximately 16.5 x 6.6 x 3.3 cm)
Special Feature	Ergonomic design

8. Warranty and Support

This product is typically covered by a manufacturer's warranty. For specific warranty details, including duration and terms, please refer to the documentation provided with your purchase or contact the retailer. For technical support or further assistance, please reach out to the Smartby customer service department or your product vendor.

For returns or exchanges, please adhere to the return policy of your original place of purchase.