Puig New Generation Windshield for Harley-Davidson Sportster Models (9283N)

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Puig New Generation Windshield. Designed specifically for various Harley-Davidson Sportster models, this windshield enhances your riding experience by deflecting wind and debris. Please read all instructions carefully before proceeding with installation or use.

Image: Puig New Generation Windshield installed on a Harley-Davidson Sportster motorcycle. The windshield is clear, with black mounting brackets, and is positioned above the headlight, providing a sleek and integrated appearance.

What's in the Box

Verify that all components are present before beginning installation:

• Puig New Generation Windshield (Clear or Tinted)
• Mounting Brackets (Specific to Harley Sportster models)
• Hardware Kit (Screws, washers, nuts, clamps)
• Installation Instructions Sheet

Setup and Installation

Follow these steps to properly install your Puig New Generation Windshield. Refer to the accompanying video for a visual guide.

Video Guide: Windshield Installation

Step-by-Step Installation Instructions:

1. Assemble Accessories: Begin by attaching the mounting brackets to the windshield. Ensure all screws and washers are securely fastened but do not overtighten initially.
2. Prepare Motorcycle: Ensure your motorcycle is stable and turned off. Identify the mounting points on the front forks, typically near the headlight.
3. Install Mounting Hardware: Attach the fork clamps to the motorcycle's front forks. These clamps will serve as the anchor points for the windshield assembly.
4. Mount Windshield Assembly: Carefully align the assembled windshield and brackets with the fork clamps. Secure the windshield assembly to the clamps using the provided hardware.
5. Adjust and Tighten: Adjust the position and angle of the windshield for optimal fit and rider comfort. Once satisfied with the positioning, securely tighten all screws and bolts. Do not overtighten to avoid damaging components.

Operating the Windshield

The Puig New Generation Windshield is designed to provide improved aerodynamics and wind protection during motorcycle operation. Once installed, no specific 'operation' is required beyond regular riding. It functions passively to redirect airflow over and around the rider.

Maintenance

Proper maintenance ensures the longevity and clarity of your windshield:

• Cleaning: Use a soft cloth and mild soap with water to clean the windshield. Avoid abrasive cleaners, solvents, or paper towels, as these can scratch the surface.
• Inspection: Regularly inspect the windshield and all mounting hardware for any signs of wear, damage, or looseness. Tighten any loose fasteners as needed.
• Storage: When not in use for extended periods, store the motorcycle in a covered area to protect the windshield from prolonged exposure to harsh weather conditions and UV rays.

Troubleshooting

If you encounter issues with your windshield, consider the following:

• Excessive Wind Buffeting: Ensure the windshield is securely mounted and properly angled. Minor adjustments to the angle can significantly reduce buffeting for some riders.
• Vibration or Noise: Check all mounting hardware for tightness. Loose bolts can cause vibration. Ensure no components are touching other parts of the motorcycle that could cause rattling.
• Scratches or Damage: Small scratches can sometimes be polished out with specialized plastic polishing compounds. For significant damage, replacement of the windshield may be necessary.

Specifications

Warranty and Support

For warranty information, technical support, or to purchase replacement parts, please contact Puig customer service or visit their official website. Keep your purchase receipt as proof of purchase.

Contact Information:

• Manufacturer: PUIG
• Website: www.puig.tv (Please verify for specific regional support)