Introduction
Thank you for purchasing the Victrola Gramophone Symphony Bluetooth Speaker. This speaker combines classic design with modern Bluetooth technology, allowing for wireless audio streaming. This manual provides essential information for the safe and efficient use of your speaker, including setup, operation, maintenance, and troubleshooting.
Important Safety Information
- Read all instructions before operating the device.
- Keep this manual for future reference.
- Do not expose the unit to water, moisture, or extreme temperatures.
- Do not block any ventilation openings.
- Use only attachments/accessories specified by the manufacturer.
- Unplug the device during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
Package Contents
Please ensure all items listed below are present in your package:
- Victrola Gramophone Symphony Bluetooth Speaker (VSG-140)
- AC Power Adapter
- Instruction Manual
Product Overview
Familiarize yourself with the components of your Victrola Gramophone Symphony Bluetooth Speaker.
Figure 1: Front view of the Victrola Gramophone Symphony Bluetooth Speaker, showcasing its unique gramophone-inspired design with an oak finish.
Figure 2: Side view of the speaker, highlighting the horn shape and the contrast between the oak wood and black speaker components.
Figure 3: Rear view of the speaker, typically where the power input and any physical control buttons (if present) are located.
Note: Specific button locations and port labels may vary slightly. Refer to the physical unit for exact details.
Setup
- Unpack the Speaker: Carefully remove the speaker and all accessories from the packaging.
- Placement: Place the speaker on a stable, flat surface. Ensure there is adequate ventilation around the unit.
- Connect Power: Insert the AC power adapter into the DC IN port on the speaker (refer to Figure 3 for typical location). Plug the other end of the adapter into a standard AC wall outlet.
- Initial Charge (if applicable): If your speaker has a built-in rechargeable battery, allow it to charge fully before first use. A full charge typically takes approximately 8 hours and provides up to 12 hours of playback.
Operating Instructions
Powering On/Off
- To Power On: Press and hold the Power button (usually located on the back or base) for a few seconds until an indicator light illuminates or an audible tone is heard.
- To Power Off: Press and hold the Power button again for a few seconds. The indicator light will turn off.
Bluetooth Pairing
To connect your speaker to a Bluetooth-enabled device (e.g., smartphone, tablet, laptop):
- Activate Bluetooth Mode: Ensure the speaker is powered on and in Bluetooth pairing mode. An indicator light (often blue) will typically flash rapidly, indicating it is discoverable.
- Enable Bluetooth on Your Device: Go to the Bluetooth settings on your smartphone, tablet, or other compatible device.
- Select the Speaker: In the list of available devices, look for "Victrola Gramophone Symphony" or a similar name. Select it to initiate pairing.
- Confirm Connection: Once paired, the speaker's Bluetooth indicator light will usually become solid, and an audible confirmation tone may sound. You can now play audio from your device through the speaker.
Note: The Bluetooth range is approximately 33 feet (10 meters). Obstacles may reduce this range.
Maintenance
- Cleaning: Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: If the speaker has a rechargeable battery, avoid fully discharging it frequently to prolong battery life. Charge it periodically even when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected or faulty outlet. Battery discharged. | Ensure the AC power adapter is securely connected to both the speaker and a working wall outlet. Charge the battery if operating wirelessly. |
| Cannot pair via Bluetooth | Speaker not in pairing mode. Bluetooth disabled on device. Device too far. | Ensure the speaker is in Bluetooth pairing mode (flashing indicator). Enable Bluetooth on your device. Move the device closer to the speaker (within 33 feet). |
| No sound | Volume too low. Incorrect input source. Device not connected. | Increase the volume on both the speaker and your connected device. Ensure Bluetooth is successfully paired. |
| Sound distortion | Volume too high. Weak Bluetooth signal. | Reduce the volume on both the speaker and your device. Move your device closer to the speaker to improve signal strength. |
Specifications
- Model: VSG-140
- Brand: Victrola
- Manufacturer: Innovative Technology
- Power Source: AC
- Speaker Output Power: 25 watts
- Connectivity: Bluetooth
- Bluetooth Range: Up to 33 feet (10 meters)
- Audio Output Mode: Surround
- Speaker Type: Surround Sound
- Enclosure Material: Plastic
- Product Dimensions: 60.96 x 40.64 x 40.64 cm (24 x 16 x 16 inches)
- Item Weight: 2.27 kg (5 lbs)
- Battery: 1 Lithium Ion battery (included)
- Battery Average Life: 12 hours
- Battery Charge Time: 8 hours
- Compatible Devices: Smartphone, Tablet, MP3 Player, Desktop, Laptop, Television, Projector
- Waterproof: No
Warranty and Support
This Victrola Gramophone Symphony Bluetooth Speaker (Model VSG-140) comes with a limited manufacturer's warranty. Specific details regarding the warranty period and coverage are typically provided with your purchase documentation or can be obtained by contacting the manufacturer directly.
For technical support, warranty claims, or further assistance, please contact Innovative Technology, the manufacturer of Victrola products. Contact information can usually be found on the product packaging or their official website.
Manufacturer: Innovative Technology
Place of Business: TORONTO, ON, M3B 2V9 CA
