Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your George Kovacs P1301-655-L Coastal Current LED Mini Pendant. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The George Kovacs P1301-655-L Coastal Current LED Mini Pendant in Sand White, showcasing its unique wavy design.
Image: Multiple George Kovacs P1301-655-L pendant lights illuminating a modern kitchen island.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure the fixture is properly grounded.
- Do not install this fixture in wet locations. It is designed for indoor use only.
- Handle glass components with care to prevent breakage.
- This product is ETL listed, indicating compliance with North American safety standards.
Image: The ETL Listed Intertek logo, signifying that the product meets safety standards.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.
- LED Mini Pendant Fixture (P1301-655-L)
- Mounting Hardware
- Instruction Manual
- P1081-077 (Component as listed in product data)
Setup (Installation)
This fixture is designed for semi-flush mount installation. Professional installation is recommended.
- Turn Off Power: Before starting, ensure the power supply to the installation area is turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Securely attach the mounting bracket to the ceiling junction box. Ensure the junction box can support the fixture's weight (6.5 lbs).
- Adjust Pendant Height: The pendant's overall height can be adjusted from 20.5 inches to 56.5 inches. Determine the desired hanging length before wiring.
- Make Electrical Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
- Secure Canopy: Carefully push the fixture's canopy up to the ceiling, covering the junction box and mounting bracket. Secure it with the provided screws.
- Install Shade/Diffuser: If the shade or diffuser is separate, carefully attach it according to the specific instructions provided with the fixture.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: Close-up of the pendant light's canopy, which attaches to the ceiling.
Image: Diagram showing the dimensions of the pendant light, including its 9-inch diameter and adjustable height from 20.5 to 56.5 inches.
Operating Instructions
This LED mini pendant is designed for ease of use and energy efficiency.
- Power On/Off: Operate the light using a standard wall switch connected to the fixture's circuit.
- Dimming Function: This fixture is dimmable. Use a compatible LED dimmer switch (sold separately) for optimal performance and light level control.
- Remote Control: The fixture supports remote control operation. Refer to the remote control's specific instructions for pairing and functionality.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your pendant light.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. For glass components, a mild glass cleaner can be applied to a cloth, then gently wipe the glass. Avoid abrasive cleaners or solvents.
- Bulb Replacement: This fixture uses integrated LED components and does not require traditional bulb replacement. If the LED light source fails, contact customer support for assistance.
- Inspection: Periodically check all electrical connections and mounting hardware for tightness.
Troubleshooting
If you experience issues with your pendant light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims unexpectedly. |
|
|
| Remote control not working. |
|
|
Specifications
| General | |
|---|---|
| Brand | GEORGE KOVACS |
| Model Number | P1301-655-L |
| Color | Sand White |
| Material | Glass |
| Style | Coastal |
| Room Type | Bedroom, Dining Room, Entryway, Kitchen, Living Room |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 6.5 Pounds |
| Item Dimensions (L x W x H) | 13.5"L x 9"W x 13.5"H |
| Minimum Overall Height | 20.5 inches |
| Maximum Overall Height | 56.5 inches |
| Electrical & Lighting | |
| Power Source | Corded Electric |
| Light Source | LED |
| Number of Light Sources | 1 |
| Voltage | 120 Volts |
| Wattage | 16 watts |
| Brightness | 402 lumens |
| Light Color Temperature | 3000K |
| Color Rendering Index (CRI) | 95CRI |
| Dimmable | Yes |
| Control Method | Remote |
| Switch Type | Rocker |
| Certifications | |
| Specification Met | ETL |
Warranty
This George Kovacs P1301-655-L LED Mini Pendant is covered by a Limited 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. For warranty claims, please retain your proof of purchase and contact customer support.
Support
For technical assistance, missing parts, or warranty inquiries, please contact George Kovacs customer support. Visit the official George Kovacs website for contact information or refer to your purchase documentation.
Online Resources: Visit the GEORGE KOVACS Store on Amazon
