1. Introduction
Thank you for choosing the WALI Single Monitor Stand (MF001). This freestanding desk mount is designed to provide an ergonomic and space-saving solution for your computer screen. It supports monitors and TVs ranging from 13 to 32 inches, with a maximum weight capacity of 22 lbs (10 kg). The stand features universal VESA compatibility (75x75mm and 100x100mm) and offers adjustable height, tilt, swivel, and rotation for optimal viewing comfort. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.
2. Safety Information
WARNING: Failure to read and follow all instructions, cautions, and warnings in this manual may result in personal injury or property damage.
- Do not exceed the maximum weight capacity of 22 lbs (10 kg).
- Ensure your monitor's VESA mounting pattern is 75x75mm or 100x100mm.
- This product is intended for indoor use only.
- Do not attempt to modify the stand or use it for purposes not explicitly stated in this manual.
- Keep children and pets away during installation.
- Periodically check all screws and connections to ensure they remain secure.
3. Package Contents
Verify that all components are present and undamaged before beginning assembly. If any parts are missing or defective, please contact WALI customer support.
- 1 x WALI Single Monitor Stand (Black)
- 1 x Mounting Hardware Kit (various screws, washers, spacers)
- 1 x User Manual (this document)
4. Setup and Installation
Assembly requires a Phillips head screwdriver and potentially a wrench for tightening bolts. It is recommended to have a clear, flat workspace.
Step 4.1: Assemble the Base
Attach the vertical pole to the freestanding base using the provided screws. Ensure the connection is secure and stable.
Figure 4.1: Product Dimensions and VESA Compatibility
Step 4.2: Attach the VESA Plate to the Monitor
Carefully place your monitor face down on a soft, clean surface. Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm). Use the appropriate screws, washers, and spacers from the hardware kit to secure the plate to the monitor. Do not overtighten.
Figure 4.2: Display Compatibility Overview
Step 4.3: Mount the Monitor to the Stand
Slide the VESA plate with the attached monitor onto the mounting bracket on the vertical pole. Ensure it clicks securely into place. Tighten any locking screws or knobs to prevent accidental detachment.
Figure 4.3: Monitor Mounted on Stand
Step 4.4: Cable Management
Utilize the integrated cable management clips or channels on the stand to route your monitor cables neatly. This helps maintain a clean workspace and prevents cable damage. It is advisable to install cable management components before fully assembling the stand if they are integrated into the main structure.
5. Operating Instructions (Adjustments)
The WALI Single Monitor Stand offers various adjustments to customize your viewing experience.
5.1 Height Adjustment
To adjust the monitor height, loosen the height adjustment collar on the vertical pole, slide the monitor to your desired height (up to 18 inches), and then securely tighten the collar. For easier adjustment, it is recommended to adjust the height without the monitor attached, or with assistance, as the monitor's weight can make it difficult.
Figure 5.1: Height Adjustment Range
5.2 Angle Adjustment (Tilt, Swivel, Rotate)
The monitor arm allows for flexible positioning:
- Swivel: Rotate the monitor +/- 90 degrees horizontally to share your screen or adjust viewing angle.
- Tilt: Adjust the screen vertically +/- 45 degrees to reduce glare and optimize viewing comfort.
- Rotation: Rotate the monitor 360 degrees to switch between landscape and portrait orientations.
Figure 5.2: Angle Adjustment Capabilities
6. Maintenance
To ensure the longevity and proper function of your WALI Single Monitor Stand, follow these maintenance guidelines:
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
- Inspection: Periodically check all screws, bolts, and connections to ensure they are tight and secure. Retighten if necessary.
- Movement: If the arm's movement becomes too loose or too stiff, refer to the troubleshooting section for adjustment instructions.
7. Troubleshooting
If you encounter issues with your WALI Single Monitor Stand, please consult the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor wobbles or is unstable. | Loose connections; uneven surface; monitor too heavy. | Ensure all screws (base, VESA plate, arm) are securely tightened. Place the stand on a flat, stable surface. Verify monitor weight is within 22 lbs limit. |
| Difficulty adjusting height. | Height adjustment collar is too tight or too loose. | Loosen the collar slightly for adjustment, then retighten firmly. Adjusting height is easier without the monitor attached. |
| Monitor does not tilt/swivel/rotate smoothly. | Joints are too tight. | Refer to the manual for specific adjustment points on the arm. Some joints may have screws that can be slightly loosened with an Allen wrench to adjust tension. |
| Missing parts from package. | Packaging error. | Contact WALI customer support immediately for assistance. |
8. Specifications
| Model Number | MF001 |
| Compatible Screen Size | 13 - 32 inches |
| Weight Capacity | 22 lbs (10 kg) |
| VESA Compatibility | 75x75mm, 100x100mm |
| Height Adjustment Range | Up to 18 inches |
| Tilt Angle | +/- 45 degrees |
| Swivel Angle | +/- 90 degrees |
| Rotation | 360 degrees |
| Base Dimensions (L x W) | 15.4 x 11 inches |
| Product Dimensions (Overall) | 3.9 x 5.4 x 16.9 inches (approximate, packed) |
| Item Weight | 4.88 pounds |
| Material | Alloy Steel |
| Color | Black |
9. Warranty
The WALI Single Monitor Stand (MF001) is backed by a 10-Year Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please contact WALI customer support.
10. Customer Support
For any questions, concerns, or assistance with your WALI Single Monitor Stand, our experienced and friendly US-based customer support team is available to assist you 7 days a week. Please refer to the contact information provided with your product packaging or visit the official WALI website for support details.
