1. Product Overview
The Total Control WM1411 TV wall mount is designed for secure and stable mounting of television units ranging from 32 to 55 inches. This mount is compatible with various VESA sizes, specifically from 200 x 100 mm up to 400 x 400 mm, ensuring broad compatibility with many TV models. Its slim design allows for a minimal distance of only 19 mm from the wall, providing a sleek, low-profile appearance. All necessary mounting hardware is included for a straightforward installation process.
Key Features:
- Display Size Compatibility: Suitable for all TV sets from 32 to 55 inches.
- Easy Installation: All installation materials, including screws, wall plugs, and spacers, are provided in the product packaging for simple and easy setup.
- VESA Compatibility: Supports VESA sizes from 200 x 100 mm to 400 x 400 mm. VESA is a standard that specifies the distance between the mounting holes on the back of your TV.
- Slim Profile: Mounts TV only 19 mm from the wall.
- Durable Construction: Made from alloy steel or aluminum for robust support.
2. Safety Information
Please read all instructions carefully before installation. Incorrect installation may result in property damage, serious injury, or death. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.
- Ensure the mounting surface can safely support the combined weight of the mount and the display.
- Do not exceed the maximum weight capacity of the mount.
- Use appropriate tools and follow all drilling and mounting instructions precisely.
- Always use a stud finder to locate wooden studs for secure mounting. If mounting to concrete or brick, use appropriate anchors.
- Keep children and pets away during installation.
- Periodically check the mount for any signs of wear or loose connections.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
- Wall Plate (Main Bracket)
- TV Brackets (2 pieces)
- Mounting Hardware Kit (includes various screws, wall anchors, washers, and spacers for TV and wall attachment)
4. Setup and Installation
4.1. Before You Begin
- Check TV VESA Pattern: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 200x100mm to 400x400mm.
- Determine Wall Type: Identify if your wall is made of wood studs, concrete, or brick. This will determine the type of anchors and drilling required.
- Gather Tools: You will need a drill, stud finder (for wood walls), level, pencil, measuring tape, and a screwdriver.
4.2. Step-by-Step Installation
- Attach TV Brackets to TV: Carefully place your TV face down on a soft, clean surface. Align the two vertical TV brackets with the mounting holes on the back of your TV. Use the appropriate screws and spacers from the hardware kit to secure the brackets. Ensure the brackets are centered and level.
- Mark Wall Drilling Locations: Hold the wall plate against the wall at your desired TV height. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate with a pencil. For wood stud walls, use a stud finder to locate the center of the studs and align the wall plate holes with them.
- Drill Pilot Holes: Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the anchors being used (refer to the hardware kit instructions).
- Install Wall Anchors (if applicable): If mounting to concrete or brick, insert the appropriate wall anchors into the drilled holes. Tap them gently with a hammer until they are flush with the wall surface.
- Secure Wall Plate: Align the wall plate with the drilled holes and secure it to the wall using the provided screws and washers. Tighten all screws firmly but do not overtighten.
- Mount TV to Wall Plate: With assistance, carefully lift the TV (with the attached TV brackets) and hook the TV brackets onto the wall plate. Ensure the TV brackets are securely seated on the wall plate.
- Secure TV to Wall Plate: Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
5. Operating Instructions
The Total Control WM1411 is a fixed TV wall mount, meaning it does not offer tilt, swivel, or extension capabilities. Once installed, its operation is minimal.
- Secure Fit: Ensure the TV is securely locked onto the wall plate using the safety screws.
- Cable Management: Organize and route your TV cables neatly behind the TV or along the wall for a clean appearance.
6. Maintenance
Regular maintenance helps ensure the longevity and safety of your TV wall mount.
- Cleaning: Dust the mount periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Connection Check: Every 6-12 months, visually inspect all screws and connections to ensure they remain tight and secure. Retighten any loose screws.
- Structural Integrity: Check for any signs of damage, corrosion, or deformation on the mount or the wall. If any issues are found, consult a professional.
7. Troubleshooting
If you encounter issues during or after installation, refer to the following common problems and solutions.
- TV is not level: Ensure the wall plate was installed perfectly level. If not, carefully adjust the wall plate or use shims if minor adjustments are needed. Re-check with a level.
- Mount feels unstable: Double-check that all wall screws are securely tightened and that the correct wall anchors were used for your wall type. Ensure the TV is properly seated and locked onto the wall plate.
- Missing parts: Refer to the 'Package Contents' section. If parts are missing, do not proceed with installation. Contact Total Control customer support for replacement parts.
- TV does not fit the mount: Verify your TV's VESA pattern matches the mount's supported range (200x100mm to 400x400mm). Also, ensure your TV's screen size is within the 32-55 inch range.
8. Specifications
| Specification | Detail |
|---|---|
| Brand | Total Control |
| Model | WM1411 |
| Compatible Devices | TV |
| Minimum Screen Size | 32 inches |
| Maximum Screen Size | 55 inches |
| VESA Compatibility | 200x100 mm to 400x400 mm |
| Mounting Type | Wall Mount (Fixed) |
| Distance from Wall | 19 mm |
| Material | Alloy Steel or Aluminum |
| Product Dimensions | 46.5 x 19.5 x 42.2 cm |
| Item Weight | 930 g |
9. Warranty and Support
For information regarding warranty coverage for your Total Control WM1411 TV wall mount, please refer to the documentation included with your purchase or visit the official Total Control website. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact Total Control customer support. Contact details can usually be found on the product packaging or the manufacturer's official website.
