Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Vileda Ultramat Complete Set. Please read these instructions carefully before first use and retain them for future reference.
Product Overview
The Vileda Ultramat Complete Set is designed for efficient floor cleaning. It includes the following components:
- UltraMat Flat Mop with a three-part telescopic handle
- 2-in-1 Microfiber Mop Cover
- UltraMat Bucket with Power Press wringing mechanism
Image: The Vileda Ultramat Complete Set, showing the flat mop, the bucket, and the integrated power press wringer.
Image: The Vileda Ultramat Complete Set in its retail packaging, highlighting key features.
Setup Instructions
- Assemble the Mop Handle: Connect the three sections of the telescopic handle by twisting them together until secure. Adjust the handle length to a comfortable height.
- Attach the Mop Cover: Lay the microfiber mop cover flat on the floor. Align the mop head with the cover and press down firmly until the cover is securely attached to the hook-and-loop fasteners on the mop head.
- Prepare the Bucket: Fill the UltraMat bucket with water. For optimal cleaning, use warm water. Add a small amount of floor cleaner if desired, following the cleaner's instructions.
Operating Instructions
- Wet the Mop: Dip the mop head into the water in the bucket, ensuring the entire microfiber cover is saturated.
- Wring the Mop: Place the wet mop head into the Power Press wringer. Use your foot to press down on the wringer pedal (if applicable) or manually press the mop head into the wringer to remove excess water. Wring until the desired dampness is achieved for your floor type.
Image: The mop head being wrung in the Power Press mechanism of the bucket, demonstrating water removal.
Image: A person standing next to the Vileda Ultramat bucket with the mop head positioned in the wringer, ready for use.
- Mop the Floor: Begin mopping the floor in sections, overlapping strokes slightly. The microfiber cover is effective at picking up dirt and dust.
Image: A person actively mopping a wooden floor with the Vileda Ultramat mop, demonstrating the product in use.
- Clean the Mop Head: To fold the mop head for wringing or storage, gently press the mop head down with your foot on the designated area until it clicks into the folded position.
Image: A foot pressing on the Vileda Ultramat mop head, illustrating the mechanism for folding the mop head.
- Bacteria Removal: The 2-in-1 microfiber cover is designed to remove over 99% of bacteria and viruses from sealed hard floors with just water.
Image: A graphic highlighting the Vileda Ultramat's ability to remove over 99% of bacteria and viruses using only water.
Image: A graphic emphasizing the "2in1 Microfiber" technology for clean and streak-free cleaning results.
Maintenance
- Mop Cover Cleaning: The microfiber mop cover can be machine washed at up to 60°C (140°F). Do not use fabric softener or bleach, as these can damage the microfiber properties. Air dry or tumble dry on low heat.
- Bucket Cleaning: Rinse the bucket thoroughly with clean water after each use. Allow it to air dry to prevent mildew.
- Handle Care: Wipe the handle clean with a damp cloth as needed.
- Storage: Store the Vileda Ultramat Complete Set in a dry place.
Troubleshooting
- Mop head not wringing effectively:
- Ensure the mop head is fully inserted into the Power Press wringer. Apply firm, consistent pressure when wringing. Check if the microfiber cover is properly attached and not bunched up.
- Mop cover not attaching securely:
- Verify that the hook-and-loop fasteners on both the mop head and the cover are clean and free of debris. Press the mop head firmly onto the cover to ensure full contact.
- Streaks on floor:
- Ensure the mop is adequately wrung out for your floor type. Too much water can cause streaks. If using a cleaning solution, ensure it is diluted correctly and suitable for your floor. Clean the mop cover thoroughly after each use.
Specifications
| Model Number | 170512 |
| Product Dimensions | 11.02 x 9.92 x 14.37 inches (28 x 25.2 x 36.5 cm) |
| Item Weight | 2.2 Pounds (1 kg) |
| Material | Microfiber (mop head), Plastic (bucket, handle) |
| Handle Type | Telescopic |
| Manufacturer | Vileda |
Warranty and Support
For warranty information or product support, please refer to the official Vileda website or contact Vileda customer service directly. Contact details are typically available on the product packaging or the manufacturer's website.
Note: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a cleaning tool and not a dietary supplement.
