Vicco Rick

Vicco Rick Corner Kitchen Unit

Model: Rick (Model No. 26327) - Sonoma/White

Introduction

This instruction manual provides essential information for the safe and efficient assembly, operation, and maintenance of your Vicco Rick Corner Kitchen Unit. Please read this manual thoroughly before beginning assembly or use, and retain it for future reference. This kitchen unit is designed for flexible arrangement and personalized expansion, offering an optimized design for various kitchen layouts.

Safety Information

  • Water Connections: Observe all instructions for safe connection of water supply and drainage lines. Improper installation can lead to leaks and water damage.
  • Moisture Protection: Avoid direct contact with water and excessive humidity to prevent damage to the engineered wood components.
  • Cleaning: Always use a dry cloth for cleaning to protect the surface finish.
  • Weight Capacity: Do not exceed the maximum weight capacity of 260 kg for the entire unit. Distribute weight evenly across shelves and drawers.
  • Assembly: Ensure all components are securely fastened as per the assembly instructions to prevent instability or collapse.

Setup and Assembly

The Vicco Rick Corner Kitchen Unit requires assembly. It is recommended to have at least two people for assembly. Ensure you have sufficient space and all components are present before starting.

Required Tools:

  • Screwdriver (Phillips head recommended)
  • Measuring tape
  • Level
  • Drill (for wall mounting, if applicable)

Assembly Steps:

  1. Unpack and Identify Components: Carefully unpack all boxes and identify each component using the provided parts list.
  2. Assemble Cabinet Bodies: Follow the detailed diagrams to assemble the individual cabinet bodies. Attach the back panel to each cabinet body using the provided screws (typically 8 screws per panel).
  3. Install Adjustable Legs: Attach the adjustable legs to the base of each cabinet. Adjust the height to ensure a level and stable foundation.
  4. Position Cabinets: Arrange the assembled cabinets in your desired L-shape configuration. The modular design allows for flexible placement.
  5. Secure Worktop: Place and fix the worktop onto the base cabinets. Ensure it is flush and securely attached. The worktops have a depth of 60 cm.
  6. Connect Water and Drainage: For sink units, connect the water supply and drainage pipes according to local plumbing codes and safety guidelines.
  7. Install Doors and Drawers: Attach door hinges and install doors. Ensure proper alignment and smooth operation. Install drawer slides and assemble drawers, then insert them into their respective compartments.
  8. Final Adjustments: Make any necessary adjustments to door and drawer alignment, and ensure all adjustable legs are properly set for stability.

For detailed visual instructions, refer to the assembly diagrams provided with your product packaging.

Diagram showing various dimensions and configurations of the Vicco Rick corner kitchen unit components.

Figure 1: Dimensional diagrams for various modules of the Vicco Rick kitchen unit, illustrating possible layouts and individual component sizes.

Detailed diagram showing dimensions for an L-shaped configuration of the Vicco Rick kitchen unit.

Figure 2: Detailed L-shaped configuration diagram with overall dimensions and individual module measurements.

Close-up of a gas strut mechanism for a cabinet door, indicating smooth opening and closing functionality.

Figure 3: Example of a gas strut for cabinet doors, ensuring smooth and controlled movement.

Operating Instructions

The Vicco Rick Corner Kitchen Unit is designed for daily use in a kitchen environment. Its modular nature allows for various functionalities depending on the chosen configuration.

  • Cabinet and Drawer Use: Open and close doors and drawers gently. Avoid slamming to prolong the life of hinges and slides.
  • Worktop Use: The worktop is made of PL Marble (melamine resin coated particle board). While durable, avoid placing extremely hot items directly on the surface without protection. Use cutting boards to prevent scratches.
  • Adjustable Legs: The adjustable legs allow for leveling on uneven floors. Periodically check and re-adjust if necessary to maintain stability.
A modern kitchen setup featuring the Vicco Rick corner kitchen unit in Sonoma/White, with an integrated oven, sink, and overhead cabinets.

Figure 4: An assembled Vicco Rick corner kitchen unit, showcasing its functional layout with appliances.

Maintenance

Proper maintenance will ensure the longevity and appearance of your Vicco Rick Corner Kitchen Unit.

  • Cleaning Surfaces: Wipe all surfaces with a soft, dry cloth. For stubborn stains, a slightly damp cloth with mild soap can be used, followed immediately by drying with a clean, dry cloth.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, strong detergents, or solvents, as these can damage the melamine resin coating.
  • Moisture Protection: Immediately wipe up any spills, especially water, to prevent swelling or damage to the engineered wood.
  • Hardware Check: Periodically check all screws, hinges, and drawer slides for tightness. Tighten any loose fittings to maintain structural integrity.

Troubleshooting

This section addresses common issues you might encounter with your kitchen unit.

  • Wobbly Cabinets: Check the adjustable legs. Ensure they are all in firm contact with the floor and adjusted to level the unit.
  • Doors Not Closing Properly: Adjust the hinges. Most hinges have screws for horizontal, vertical, and depth adjustments. Refer to the hinge manufacturer's instructions if specific adjustments are unclear.
  • Drawers Sticking: Check if the drawer slides are clean and free of debris. Ensure the drawer is correctly seated on the slides. Lubricate slides with a silicone-based spray if necessary.
  • Water Leaks (Sink Unit): Immediately turn off the water supply. Check all connections for tightness. If the leak persists, consult a qualified plumber.
  • Scratches on Worktop: Minor scratches can sometimes be minimized with furniture repair kits designed for laminate surfaces. Deep scratches may require professional repair or replacement of the affected section.

Specifications

FeatureDetail
BrandVicco
Model NameRick
Model Number26327
ColorSonoma/White
MaterialEngineered Wood (16mm particle board with melamine resin coating)
Worktop MaterialPL Marble (Melamine resin coated)
Overall Dimensions (L-shape)167 x 207 cm (width), 82 cm (height), 46 cm (depth of cabinets)
Worktop Depth60 cm
Item Weight176.8 kg
Maximum Weight Capacity260 kg
Number of Doors7
Number of Drawers1
Number of Shelves1 (additional shelves may be included or optional)
Special FeaturesScratch-resistant, adjustable height legs, customizable layout
Assembly RequiredYes
Mounting TypeFloor-standing (with optional wall mounting for upper cabinets)

Warranty and Support

Your Vicco Rick Corner Kitchen Unit is covered by a return policy allowing returns within 30 days of receipt. For any questions, concerns, or assistance with your product, please contact the specialized customer service provided by the seller, ok-living.

  • Return Policy: 30 days from receipt for refund or replacement.
  • Customer Service: Contact ok-living for specialized customer support.
  • Online Resources: For additional information and products, visit the official Vicco store: Vicco Store on Amazon.

© 2026 Vicco. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.