San Jamar SCDGSL33

San Jamar SCDGSL33 Slimline Portion Control Digital Scale

Model: SCDGSL33 | Brand: San Jamar

Product Overview

The San Jamar SCDGSL33 Slimline Portion Control Digital Scale is designed for precise weighing of food items. Its low-profile design and stainless steel platform make it suitable for various kitchen environments. This scale features touch-sensitive controls and an LED display for ease of use and cleaning.

San Jamar SCDGSL33 Slimline Digital Scale, top view

Image: Top view of the San Jamar SCDGSL33 Slimline Portion Control Digital Scale.

Features

  • Low Profile Design: 1-inch overall height allows the scale to be used under cabinets or in other confined spaces.
  • Large Weighing Surface: Commercial-grade sensors offer precise measurements across a large surface area, ideal for weighing bulky or irregularly shaped items.
  • Touch Screen: Large display features a water-resistant LED touch-sensitive display for easy operation and extended battery life.
  • Easy to Clean: Stainless-steel surface wipes clean with a damp cloth for easy cleanup.
  • Portability: Powered by (4) AA batteries (included), making it ideal for use in locations where plugs would be impractical or unsanitary.
San Jamar SCDGSL33 Slimline Digital Scale, side view showing low profile

Image: Side view highlighting the low-profile design of the scale.

Setup

  1. Unpack the Scale: Carefully remove the scale from its packaging.
  2. Install Batteries: The scale requires (4) AA batteries. Locate the battery compartment on the underside of the scale, open it, insert the batteries according to the polarity indicators, and close the compartment.
  3. Placement: Place the scale on a firm, flat, and level surface to ensure accurate readings. Avoid placing it on soft or uneven surfaces.
San Jamar SCDGSL33 Slimline Digital Scale on a flat surface, showing 0.00 display

Image: The scale placed on a flat surface, ready for use.

Operating Instructions

  1. Power On/Off: Press the TARE/O button to turn the scale on. The display will show "0.00". To turn off, press and hold the TARE/O button for a few seconds.
  2. Select Units: Press the MODE button to cycle through available units (e.g., grams, ounces, pounds).
  3. Tare Function: To weigh items in a container, first place the empty container on the scale. Press the TARE/O button to reset the display to "0.00". Then, add the items to be weighed into the container. The display will show the net weight of the items.
  4. Weighing Items: Place the item(s) directly onto the stainless steel platform or into a tared container. The weight will be displayed on the LED screen.
Finger pressing the MODE button on the scale

Image: A finger pressing the MODE button to change units.

Finger pressing the TARE/O button on the scale

Image: A finger pressing the TARE/O button to zero out the scale.

Scale displaying weight of food in a container

Image: The scale showing the weight of food in a container, demonstrating the tare function.

Demonstration Video

Video: "Escali x San Jamar - Tip the Scales" - This video demonstrates the general use and benefits of San Jamar/Escali scales in a commercial setting, including portion control.

Maintenance

  • Cleaning: Wipe the stainless steel platform and display with a damp cloth. Avoid abrasive cleaners or submerging the scale in water.
  • Battery Replacement: When the battery indicator appears on the display, replace the (4) AA batteries. Ensure correct polarity.
  • Storage: Store the scale in a dry, clean environment.

Troubleshooting

ProblemPossible CauseSolution
Scale does not turn on.Dead or incorrectly installed batteries.Replace batteries with new (4) AA batteries, ensuring correct polarity.
Inaccurate readings.Uneven surface, scale overloaded, or internal sensor issue.Place the scale on a firm, level surface. Ensure the weight does not exceed the maximum capacity (41.7 lbs). If issues persist, contact customer support.
Display shows "Err" or other error messages.Scale overloaded or internal malfunction.Remove any items from the scale. Turn the scale off and then on again. If the error persists, contact customer support.
Scale turns off too quickly.Auto-off feature activated.This is a standard power-saving feature. Refer to the full manual for potential adjustments to auto-off settings, if available.

Specifications

  • Brand: San Jamar
  • Model: SCDGSL33
  • Color: Stainless
  • Display Type: LED
  • Weight Limit: 41.7 Pounds (18.9 kg)
  • Form Factor: Flat Platform
  • Material Type: Plastic (housing), Stainless Steel (platform)
  • Power Source: (4) AA Batteries (included)
  • Item Weight: 0.01 Ounces (Note: This value appears to be an error in the source data. The actual product weight would be significantly higher.)
  • UPC: 759376209974

Warranty and Support

For specific warranty information regarding your San Jamar SCDGSL33 scale, please refer to the documentation included with your purchase or contact San Jamar customer service directly. Protection plans may also be available for extended coverage.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please visit the official San Jamar website or contact their customer service department.

Video: "About CFS Brands" - This video provides an overview of CFS Brands, the parent company of San Jamar, and their commitment to quality and service.

© 2026 San Jamar. All rights reserved.

For more information, visit San Jamar's official website.

Related Documents - SCDGSL33

Preview San Jamar SCDG13LP Low Profile Digital Scale Instruction Manual
Instruction manual for the San Jamar SCDG13LP Low Profile Digital Scale. Provides details on initial setup, operation, tare function, proper use and care, warning messages, and product specifications. Features include automatic shut-off and NSF certification.
Preview Modular Straw & Napkin Combo Dispenser Instructions - San Jamar
Comprehensive instructions for loading, changing faceplates, and disassembling/reassembling the San Jamar Modular Straw & Napkin Combo Dispenser (MODH6005*).
Preview Rely Hybrid Soap Dispenser User Manual
Installation, operation, and maintenance guide for the San Jamar Rely Hybrid Soap Dispenser (SH900/SHF900).
Preview San Jamar Element Towel Dispenser Installation and Mounting Guide
Detailed instructions for installing, loading paper, and mounting the San Jamar Element Lever Roll Towel Dispenser. Includes handle installation, paper loading steps, mounting procedures, and contact information.
Preview San Jamar In-Counter Product Specification Guide
Comprehensive product specification guide for San Jamar in-counter solutions, including cup dispensers, lid dispensers, trash chutes, Soft-Touch pumps, and napkin dispensers.
Preview San Jamar 2018 Sanitary Maintenance Products Catalog
Comprehensive catalog of San Jamar's sanitary maintenance products, including dispensers for towels, tissues, soap, air care, napkins, and more. Featuring product innovations, specifications, and terms.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.