1. Introduction
Thank you for choosing the WALI Triple Monitor Desk Mount. This product is designed to enhance your workspace by providing a stable and adjustable solution for mounting up to three monitors. By elevating your displays, it helps to free up valuable desk space and promotes a more ergonomic viewing experience, reducing neck and eye strain. This manual provides essential information for proper installation, operation, and maintenance of your monitor mount.
2. Package Contents
Please verify that all components listed below are present and in good condition before beginning installation. If any parts are missing or damaged, please contact WALI customer support.
- WALI Triple Monitor Mount (Black) x 1
- Mounting Hardware Kit (various screws, washers, spacers)
- C-Clamp Base Components
- Grommet Base Components
- Assembly Tools (Allen wrenches)
- User Manual x 1
Image: All components of the WALI Triple Monitor Desk Mount.
3. Compatibility Requirements
Ensure your monitors and desk meet the following specifications for optimal performance and safety:
- Monitor Size: Fits most flat panel monitors up to 27 inches.
- Weight Capacity: Supports up to 22 lbs (10 kg) per arm.
- VESA Compatibility: Applicable to mounting holes 75x75mm and 100x100mm. Mount plates are detachable for easier installation.
- Desk Thickness (C-Clamp): Suitable for desks with a thickness between 0.4 inches and 4 inches.
- Desk Thickness (Grommet Base): Suitable for desks with a thickness between 0.4 inches and 3 inches.
Image: Display compatibility specifications for the monitor mount.
Image: Desk compatibility for C-clamp and Grommet base mounting options.
4. Setup and Installation
Follow these steps carefully to install your WALI Triple Monitor Desk Mount.
- Choose Your Mounting Option:
The mount supports two installation methods: C-Clamp or Grommet Base. Select the method that best suits your desk and preferences. The C-Clamp is ideal for desks without existing holes, while the Grommet Base utilizes a pre-drilled hole or requires drilling one. - Assemble the Pole and Base:
Attach the main pole to your chosen base (C-Clamp or Grommet). Securely fasten all screws as per the included hardware kit. Ensure the base is firmly attached to your desk to prevent instability. - Attach Monitor Arms:
Slide the monitor arms onto the main pole. The arms can be adjusted vertically along the pole to achieve your desired height. Tighten the locking mechanisms on the arms once their position is set. - Attach VESA Plates to Monitors:
Remove the VESA plates from the monitor arms. Using the appropriate screws and spacers from the hardware kit, attach each VESA plate to the back of your monitors. Ensure the screws are tightened securely but do not overtighten. - Mount Monitors to Arms:
Carefully slide the monitors (with attached VESA plates) onto the monitor arms. The detachable VESA plates make this step easier. Ensure the monitors click into place or are secured with any provided locking screws. - Cable Management:
Utilize the integrated cable management clips or channels on the arms and pole to route and organize your monitor cables. This helps maintain a clean and clutter-free workspace.
Image: Detachable VESA plates simplify the monitor attachment process.
Image: Example of clean cable management using the integrated clips.
Video: An official WALI video demonstrating the installation process for the triple monitor desk mount.
5. Operating and Adjustments
The WALI Triple Monitor Desk Mount offers multiple adjustment options to customize your viewing experience:
- Height Adjustment: The monitor arms can be moved up or down along the 31.5-inch central pole. Loosen the locking mechanism on the arm, slide to the desired height, and re-tighten.
- Tilt Adjustment: Each monitor can be tilted +/-15 degrees to reduce glare and optimize viewing angles. Use the provided Allen wrench to adjust the tilt tension if needed.
- Swivel Adjustment: Monitors can swivel +/-90 degrees at the arm joints, allowing you to position them precisely.
- Rotation: Monitors can be rotated 360 degrees, allowing for quick switching between landscape and portrait orientations.
Image: Visual guide to the tilt, swivel, and rotation capabilities of the mount.
Image: Demonstrating the swivel and rotation range of the monitor arms.
6. Maintenance
To ensure the longevity and continued performance of your WALI Triple Monitor Desk Mount, follow these simple maintenance guidelines:
- Regular Cleaning: Wipe down the mount with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents that could damage the finish.
- Check Connections: Periodically inspect all screws and bolts to ensure they remain tight. Over time, vibrations or frequent adjustments may cause them to loosen. Re-tighten as necessary using the provided Allen wrenches.
- Lubrication (if needed): If any joints become stiff or difficult to adjust, a small amount of silicone-based lubricant can be applied, but this is rarely necessary for this type of mount.
7. Troubleshooting
If you encounter any issues with your monitor mount, refer to the following common problems and solutions:
- Monitor is Sagging or Not Holding Position:
This is typically due to insufficient tension. Locate the tension adjustment screw on the monitor arm (often near the VESA plate or arm joint) and tighten it using the appropriate Allen wrench. Ensure your monitor's weight does not exceed the 22 lbs (10 kg) per arm capacity. - Mount Feels Unstable or Wobbles:
Verify that the C-Clamp or Grommet Base is securely fastened to your desk. Ensure the desk surface is sturdy and capable of supporting the combined weight of the mount and monitors. Check that all connections along the pole and arms are tightened. - Difficulty Adjusting Tilt/Swivel/Rotation:
Some adjustments may require loosening or tightening a specific screw to change the tension. Refer to the installation diagrams for the location of these adjustment points. Do not force adjustments if they feel stiff; instead, check for tension screws. - Monitors Are Not Aligned Evenly:
Adjust the height of individual monitor arms along the central pole. Fine-tune the tilt and swivel of each monitor to achieve perfect alignment.
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 3.5 x 9.8 x 17.48 inches |
| Item Weight | 10.65 pounds |
| Model Number | M003 |
| Mounting Type | Tabletop Mount (C-Clamp or Grommet) |
| Movement Type | Articulating |
| Material | Metal |
| Maximum Compatible Screen Size | 27 Inches |
| Minimum Compatible Screen Size | 13 Inches |
| Color | Black |
| Maximum Tilt Angle | +/-15 Degrees |
| Swivel Angle | +/-90 Degrees |
| Rotation Angle | 360 Degrees |
Image: Key dimensions of the WALI Triple Monitor Desk Mount.
9. Warranty and Support
WALI products are designed for durability and performance. For specific warranty details, please refer to the documentation included with your purchase or visit the official WALI website.
Should you require assistance with installation, troubleshooting, or have any questions regarding your WALI Triple Monitor Desk Mount, our experienced and friendly US-based customer support team is available to assist you 7 days a week.
You can also refer to the official User Manual in PDF format for additional details: Download PDF Manual
