Introduction
The Final E2000 in-ear headphones are designed to deliver a high-resolution audio experience with natural sound and superb clarity. Featuring durable aluminum construction and a 3.5mm standard plug, these headphones are engineered for both exceptional sound quality and comfortable, extended listening.
This manual provides essential information for setting up, operating, and maintaining your Final E2000 headphones to ensure optimal performance and longevity.
Key Features
- Hi-Definition 6.4mm Dynamic Driver: Engineered for precise and detailed sound reproduction across the frequency spectrum.
- Hi-Res Audio Certified: Ensures high-fidelity sound, capturing the nuances of your music.
- Durable and Stylish Black Aluminum Construction: Provides a robust yet lightweight build for comfort and longevity.
- Vast Concert-like Soundstage: Acoustic design creates an expansive listening experience.
- Powerful Bass Tones: Delivers deep, well-defined bass frequencies.
- 3.5mm Standard Plug: Offers broad compatibility with various audio devices.
What's in the Box
- Final E2000 Earphones
- Carry Case
- Silicon ear pieces (E type 5 sizes)
- Ear hook
- Pouch
Product Overview
Figure 1: Final E2000 In-Ear Headphones (Overall View)
Figure 2: Earpiece Design and Driver Grille
Figure 3: Earpiece Nozzle Detail
Setup
1. Choosing the Right Eartips
The Final E2000 comes with five sizes of silicon eartips (E type). Selecting the correct size is crucial for optimal sound quality and comfort. A proper seal ensures full bass response and effective passive noise isolation.
- Experiment with different eartip sizes to find the best fit for your ears.
- Insert the earpiece gently into your ear canal. The fit should feel snug but not uncomfortable.
- Test the sound. If the bass sounds weak or the sound is thin, try a larger eartip. If it feels too tight or muffled, try a smaller size.
2. Connecting to Your Device
The Final E2000 headphones connect via a standard 3.5mm audio jack.
- Locate the 3.5mm audio output port on your smartphone, tablet, computer, or audio player.
- Insert the 3.5mm plug of the headphones firmly into the audio port until it clicks into place.
- Ensure the volume on your device is set to a low level before playing audio to prevent sudden loud sounds.
Operating Instructions
Listening to Audio
Once connected, you can begin playing audio from your device. The Final E2000 headphones are designed for pure audio playback and do not feature inline controls for volume or track navigation.
- Control playback (play, pause, skip tracks) and volume directly from your connected audio device.
- For optimal sound quality, use high-resolution audio files if your device supports them.
Wearing the Headphones
The E2000 can be worn with the cable hanging straight down or over the ear using the included ear hooks for a more secure fit, especially during activity.
- Standard Fit: Insert the earpieces into your ears with the cables hanging naturally.
- Over-Ear Fit (Recommended for active use): Attach the ear hooks to the cables near the earpieces. Loop the cable over the top of your ear, then insert the earpiece into your ear canal. This reduces cable noise and provides a more stable fit.
Maintenance
Proper care will extend the life of your Final E2000 headphones.
- Cleaning Eartips: Regularly remove the silicon eartips and wash them with mild soap and water. Rinse thoroughly and allow them to dry completely before reattaching.
- Cleaning Earpieces: Gently wipe the earpieces and cables with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Storage: When not in use, store your headphones in the provided carry case or pouch to protect them from dust, dirt, and tangling.
- Avoid Moisture: Keep the headphones away from water and excessive humidity. Do not submerge them in liquid.
- Cable Care: Avoid sharp bends or excessive pulling on the cable, as this can damage the internal wiring.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume |
|
|
| Sound is distorted or unclear |
|
|
| Headphones are uncomfortable |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | E2000 |
| Brand | Final |
| Connectivity Technology | Wired |
| Headphones Jack | 3.5 mm Jack |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 6.4 Millimeters |
| Frequency Range | 20 Hz - 20,000 Hz |
| Material | Aluminum |
| Color | Black |
| Item Weight | 0.704 ounces (approx. 0.02 Kilograms) |
| Product Dimensions | 47 x 0.25 x 0.25 inches |
| Control Type | Media Control (via connected device) |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Noise Control | None (Passive isolation from eartips) |
Official Product Video
Video: Final E2000 Hi-Fi In-Ear Headphones Overview. This video provides a visual overview of the E2000 headphones, highlighting their key features, design, and compatibility. It showcases the product's aesthetic and functional aspects.
Warranty and Support
For information regarding warranty coverage, technical support, or service, please refer to the official Final product website or contact their customer service directly. Details can often be found on the product packaging or through the retailer where the product was purchased.
You may also visit the Final Store on Amazon for additional product information and resources.