WAC Lighting H-LED009-30-WT LED Framing Projector Track Head User Manual
Model: H-LED009-30-WT
Introduction
This manual provides instructions for the installation, operation, and maintenance of the WAC Lighting H-LED009-30-WT LED Framing Projector Track Head. This product utilizes multi-chip LED technology and two lenses for precise focus adjustment, designed to highlight artwork, wall decor, or project images and logos. It is compatible with H, J/J2, and L style track configurations.
The H-LED009-30-WT features durable aluminum construction, 355-degree horizontal rotation, and 90-degree vertical aiming. It accepts one accessory lens and "D" size glass and metal gobos (sold separately). The unit offers smooth and continuous dimming down to 10% with an electronic low voltage dimmer.
Important Safety Information
WARNING: Risk of electric shock. Disconnect power before installation or servicing.
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Ensure the track system is securely mounted to the ceiling structure. Due to the weight of the fixture (approximately 4 pounds), standard drywall anchors may not be sufficient. Secure mounting directly into ceiling joists is recommended, especially when installing multiple units.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
Do not attempt to modify or disassemble the fixture. Refer all servicing to qualified personnel.
Package Contents
Verify that all components are present before beginning installation:
- WAC Lighting H-LED009-30-WT LED Framing Projector Track Head
- Mounting Hardware
- Installation Instructions (this manual)
Setup and Installation
This fixture is designed for track mounting. Ensure your track system is compatible with H-Track, J/J2-Track, or L-Track systems. The specific model H-LED009-30-WT is designed for H-Track systems.
1. Track Compatibility
Identify your existing track system type. The H-LED009-30-WT is specifically designed for H-Track systems. Adapters for other track types (Juno, Lightolier) are available for other variants of this product line, but ensure you have the correct model for your track.
Image: Various track fixture configurations, including H-Track, Lightolier (L-Track), and Juno (J-Track/J2-Track) systems, with their respective adapter types and dimensions. This helps in identifying the correct track system for installation.
2. Mounting the Fixture
- Power Disconnection: Before any installation, ensure the power to the track lighting circuit is turned off at the circuit breaker.
- Insert Adapter: Align the track adapter of the fixture with the track slot. Push the adapter into the track until it clicks into place.
- Secure Connection: Rotate the locking tab or lever on the adapter to secure the fixture firmly to the track. Ensure a stable connection to prevent accidental dislodgement.
- Power Restoration: Once the fixture is securely installed, restore power to the track lighting circuit.
Operating Instructions
The WAC Lighting H-LED009-30-WT offers adjustable light projection and dimming capabilities.
1. Aiming and Rotation
- Horizontal Rotation: The fixture can be rotated 355 degrees horizontally along the track. Gently turn the fixture body to direct the light as needed.
- Vertical Aiming: The fixture head can be aimed 90 degrees vertically. Adjust the pivot point to tilt the light beam up or down.
2. Focus Adjustment
The framing projector uses two lenses for precise focus adjustment. This allows for sharp edges when framing artwork or projecting images.
- Lens Adjustment: Locate the focus adjustment rings or mechanisms on the fixture.
- Fine-Tuning: Adjust the lenses until the projected light beam achieves the desired sharpness and clarity. This may require minor adjustments to both lenses.
3. Framing Shutters (Gobo Holder)
The fixture includes framing shutters to shape the light beam and accepts "D" size glass and metal gobos (sold separately).
- Shutter Adjustment: Manipulate the four framing shutters to create a rectangular or square light shape. Adjusting these shutters requires patience and understanding of their mirror effect. For example, to adjust the left edge of the projected light, you typically manipulate the right-side shutter.
- Gobo Insertion: If using gobos, carefully insert the "D" size gobo into the designated slot. Ensure it is seated correctly.
4. Dimming
This LED track head is designed for smooth and continuous dimming down to 10% with an electronic low voltage (ELV) dimmer. Ensure your dimmer switch is compatible with ELV LED fixtures for optimal performance.
Maintenance
The WAC Lighting H-LED009-30-WT LED Framing Projector Track Head requires minimal maintenance.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or optical components.
- LED Module: The high-powered LED module is replaceable and has a rated life of 60,000 hours. Replacement should only be performed by qualified personnel.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up | No power to the track; Fixture not properly seated in track; Faulty wiring. | Check circuit breaker; Ensure fixture adapter is securely locked into the track; Consult a qualified electrician. |
| Light beam is blurry or unfocused | Lenses require adjustment. | Adjust the two focus lenses until the desired sharpness is achieved. |
| Dimming is inconsistent or flickers | Incompatible dimmer switch; Dimmer not properly installed. | Ensure an electronic low voltage (ELV) dimmer is used; Consult an electrician to verify dimmer installation. |
| Framing shutters are difficult to adjust or create uneven edges | Improper adjustment technique; Mechanical issue. | Practice adjusting the shutters, remembering the mirror effect (adjusting one side affects the opposite projected edge); If persistent, contact customer support. |
Specifications
The following are the technical specifications for the WAC Lighting H-LED009-30-WT LED Framing Projector Track Head:
| Feature | Detail |
|---|---|
| Model Number | H-LED009-30-WT |
| Brand | WAC Lighting |
| Material | Aluminum (Fixture Body), Glass (Shade Material) |
| Color | White |
| Light Source | LED |
| Color Temperature | 3000K (Warm White) |
| CRI | 80+ |
| Brightness | 215 Lumen |
| Wattage | 22 watts |
| Voltage | 120 Volts |
| Rated Life | 60,000 hours (LED module) |
| Dimming | Smooth and continuous to 10% with Electronic Low Voltage (ELV) dimmer |
| Track Compatibility | H-Track |
| Rotation | 355° Horizontal |
| Aiming | 90° Vertical |
| Dimensions (L x W x H) | 13.38" x 4.25" x 16.75" (max) |
| Weight | Approximately 4 lbs |
| Certifications | UL & CUL listed for dry locations |
| Required Assembly | Yes |
Image: Technical drawing illustrating the dimensions of the WAC Lighting H-LED009-30-WT fixture, including overall length, width, and maximum height.
Warranty Information
WAC Lighting provides the following warranty for this product:
- Functional Warranty: 5 years
- Finish Warranty: 2 years
For detailed warranty terms and conditions, please refer to the official WAC Lighting website or contact customer support.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact WAC Lighting customer service or visit their official brand store:
