Leggett & Platt Simplicity 3.0 Adjustable Bed Base Split King User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective operation, setup, and maintenance of your Leggett & Platt Simplicity 3.0 Adjustable Bed Base, Split King model. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent injury or damage.

Safety Information

• Weight Capacity: The adjustable bed base is designed to support a maximum weight of 850 pounds, including the mattress and occupants. Exceeding this weight limit may result in injury or damage to the bed base.
• Moving Parts: Keep hands, feet, and pets clear of all moving parts during operation. Ensure no objects obstruct the bed base's movement.
• Electrical Safety: Ensure the power cord is properly connected to a grounded outlet. Do not use extension cords unless absolutely necessary, and ensure they are rated for the required power. Disconnect power before cleaning or servicing.
• Children and Pets: This product is not intended for use by children or individuals with reduced physical, sensory, or mental capabilities unless supervised. Keep children and pets away from the bed base, especially during operation.
• Medical Devices: Consult your physician before using this product if you have a pacemaker or similar medical device, as the massage features may interfere with its operation.

Package Contents

Verify that all components are present before beginning assembly:

• Adjustable Bed Base (Split King includes two independent bases)
• Wireless Remote Control
• Legs (Adjustable height: 6 to 10 inches)
• Power Supply and Cord
• User Manual (This document)

Setup and Assembly

While the main base unit requires no complex assembly, the legs must be attached and the power connected.

1. Unpack Components: Carefully remove all items from the packaging. It is recommended to have two people for handling the bed base due to its weight (approximately 240 pounds for the Split King).
2. Attach Legs: Screw the adjustable legs into the designated threaded receivers on the underside of the bed base. Adjust the leg height to your desired level (6 to 10 inches).
3. Position Bed Base: Place the bed base in its desired location. For a Split King, position both independent bases side-by-side.
4. Connect Power: Plug the power cord into the power supply, then connect the power supply to the bed base. Finally, plug the power cord into a grounded electrical outlet.
5. Remote Pairing (if necessary): The wireless remote is typically pre-paired. If the remote does not respond, refer to the troubleshooting section for re-pairing instructions.

Operating Instructions

Your Simplicity 3.0 Adjustable Bed Base is controlled by a back-lit wireless remote. Familiarize yourself with the remote's functions:

Remote Control Functions:

• FLAT: Returns the bed base to a completely flat position.
• LOCK: Activates or deactivates the safety lock feature, preventing accidental adjustments.
• HEAD UP/DOWN: Adjusts the head section of the bed base upwards or downwards.
• FOOT UP/DOWN: Adjusts the foot section of the bed base upwards or downwards.
• LIGHT: Toggles the under-bed lighting on or off.
• SET: Used to program custom positions (MEM 1, MEM 2).
• SNORE: Quickly elevates the head of the base approximately 7 inches to help open airways.
• Z-GRAV (Zero Gravity): Adjusts the bed to a preset position that elevates the head and feet, designed to simulate a weightless feeling and relieve pressure points.
• MEM 1 / MEM 2: Recalls your two custom programmed positions.
• WAVE: Activates the full-body dual massage with wave motion. Press repeatedly to cycle through intensity or patterns.

Programming Custom Positions:

1. Adjust the bed base to your desired head and foot position.
2. Press the SET button. The remote's backlight may flash.
3. Within a few seconds, press either MEM 1 or MEM 2 to save the current position. The remote may flash again to confirm.

Maintenance

• Cleaning: Disconnect the power cord before cleaning. Use a soft, damp cloth to wipe down the fabric and metal surfaces. Avoid harsh chemicals or abrasive cleaners.
• Inspections: Periodically check all power cords and connections for damage or loose fittings. Ensure no objects are lodged in the moving mechanisms.
• Mattress Retention: The patented micro-hook retention system helps hold the mattress in place. Ensure the mattress is properly seated on the base.

Troubleshooting

If you encounter issues with your adjustable bed base, refer to the following common problems and solutions:

• Bed Base Not Responding:
  • Check if the power cord is securely plugged into the wall outlet and the bed base.
  • Verify that the outlet is functional by plugging in another device.
  • Ensure the remote control's LOCK feature is not activated.
  • Replace the batteries in the wireless remote control.
• Remote Control Not Pairing:
  • Refer to the manufacturer's specific instructions for remote re-pairing, usually involving a button on the control box under the bed base.
• Motor Noise:
  • Some motor noise during adjustment is normal. Excessive or unusual noise may indicate an obstruction or a mechanical issue. Inspect the area around the motors.
• Massage Function Not Working:
  • Ensure the bed base has power and the remote is functioning for other features.
  • Check for any loose connections to the massage units.

If these steps do not resolve the issue, contact Leggett & Platt customer support for further assistance.

Specifications

Warranty and Support

For warranty information, service, or technical support, please contact Leggett & Platt customer service directly. Keep your purchase receipt and model number readily available when contacting support.

Contact information can typically be found on the manufacturer's official website or on the product packaging.