1. Introduction
The Neewer NW-708M is a 7-inch on-camera monitor kit designed to enhance your DSLR or camcorder video recording experience. This kit provides a clear, high-resolution display for accurate focus and framing, along with essential accessories for versatile mounting and maintenance. It is compatible with various DSLR cameras and camcorders from brands such as Canon, Nikon, Sony, Olympus, Pentax, and Panasonic.
2. Package Contents
Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.
- 1x NW-708M 7-inch On-Camera Monitor
- 1x Sunshade
- 1x AV1 AV2 AUDIO Signal Input Cable
- 1x Battery Plate for Sony F550/F750/F970 batteries (battery not included)
- 1x Mini HDMI Cable
- 1x 11-inch Magic Arm
- 1x Hot Shoe Mount
- 1x Screw
- 1x Screw Wrench
- 2x Cleaning Cloth
- 1x Lens Brush
- 1x User Manual (this document)
Note: Camera, battery, and external power supply are not included in this kit.
3. Setup
Follow these steps to set up your Neewer NW-708M monitor kit.
3.1 Attaching the Monitor to Your Camera
- Assemble the Magic Arm: Attach the hot shoe mount to one end of the 11-inch magic arm. Secure it tightly using the screw wrench provided.
- Mount the Monitor: Screw the other end of the magic arm into the 1/4"-20 thread socket located at the bottom of the NW-708M monitor. Ensure it is firmly attached.
- Attach to Camera: Slide the hot shoe mount into your camera's hot shoe slot. Tighten the locking ring on the hot shoe mount to secure the monitor assembly to your camera. Adjust the magic arm to position the monitor at your desired viewing angle.

Figure 3.1: NW-708M monitor mounted on a DSLR camera. The monitor is attached to the camera's hot shoe using the magic arm, providing a clear external display.

Figure 3.2: The 11-inch magic arm, demonstrating its adjustable joints and mounting points for the monitor and camera hot shoe.
3.2 Powering the Monitor
The NW-708M monitor can be powered via a DC 12V power adapter (not included) or a compatible battery using the provided battery plate.
- Using a Battery: Attach a compatible Sony F550, F750, or F970 battery (not included) to the battery plate on the back of the monitor.
- Using AC Power: Connect a DC 12V (2000mA) power adapter (not included) to the DC 12V Power IN port on the side of the monitor. The monitor supports a wide voltage range of 6V-24V (600mA) for DC input and 110V-220V for AC input.
3.3 Connecting Video Sources
The monitor supports HDMI, VGA, and AV input.
- HDMI Connection: Use the provided Mini HDMI cable to connect your camera's HDMI output to the HDMI Signal IN port on the monitor.
- AV Connection: Use the AV1 AV2 AUDIO Signal Input Cable to connect your camera's AV output to the AV1/AV2/AUDIO port on the monitor.
- VGA Connection: Connect a VGA cable (not included) from your source device to the VGA Signal IN port on the monitor.

Figure 3.3: Input ports on the side of the NW-708M monitor, including DC power, HDMI, VGA, and AV/Audio inputs.
3.4 Attaching the Sunshade
The sunshade helps reduce glare and improve visibility in bright conditions.
- Align the sunshade with the grooves around the monitor's screen.
- Gently press the sunshade into place until it is securely attached.

Figure 3.4: The NW-708M monitor with the sunshade installed, providing improved visibility in bright environments.
4. Operating Instructions
This section details the basic operation of your NW-708M monitor.
4.1 Power On/Off
Press the POWER button located on the front panel of the monitor to turn it on or off.
4.2 Input Source Selection
Press the SOURCE button on the front panel to cycle through available input sources (HDMI, AV1, AV2, VGA).
4.3 Menu Navigation
To access and adjust monitor settings:
- Press the MENU button to display the on-screen menu.
- Use the arrow buttons (< and >) to navigate through menu options.
- Press the MENU button again (or a dedicated 'Enter' button if present, though not explicitly listed) to select an option or confirm a setting.
- To exit the menu, press the MENU button repeatedly until the menu disappears.
Common adjustable settings include Brightness, Contrast, Color Temperature, Aspect Ratio, and Volume (if audio is supported).

Figure 4.1: Front view of the NW-708M monitor, highlighting the SOURCE, POWER, and MENU buttons, along with arrow controls.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your monitor kit.
5.1 Cleaning the Monitor Screen and Lens
Use the provided professional cleaning kit for safe and effective cleaning.
- Lens Brush: Use the lens brush to gently remove dust and loose particles from the monitor screen and any camera lenses. Avoid applying pressure.
- Cleaning Cloth: For smudges or fingerprints, gently wipe the screen with one of the microfiber cleaning cloths. Do not use harsh chemicals or abrasive materials.

Figure 5.1: The professional cleaning kit, including a lens brush and microfiber cloths, suitable for sensitive electronics.
5.2 General Care
- Store the monitor in a dry, cool place when not in use.
- Avoid exposing the monitor to extreme temperatures or high humidity.
- Do not drop or subject the monitor to strong impacts.
- Keep the monitor away from strong magnetic fields.
6. Troubleshooting
If you encounter issues with your NW-708M monitor, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor does not power on. | No power, low battery, or faulty power connection. | Ensure the battery is charged and correctly inserted, or that the DC power adapter is properly connected and functional. |
| No signal displayed. | Incorrect input source selected, loose cable connection, or camera output issue. | Press the SOURCE button to select the correct input. Check that the HDMI or AV cable is securely connected to both the camera and the monitor. Verify your camera's video output settings. |
| Image is distorted or poor quality. | Incorrect resolution setting, faulty cable, or monitor settings. | Check your camera's output resolution and ensure it is supported by the monitor. Try a different cable. Adjust monitor settings like brightness, contrast, and color in the menu. |
| Buttons are unresponsive. | Temporary software glitch. | Turn the monitor off, then on again. If the issue persists, disconnect power for a few minutes and then reconnect. |
7. Specifications
Detailed technical specifications for the Neewer NW-708M monitor and included accessories.
7.1 NW-708M Monitor Specifications
- Screen Size: 7 inches
- Native Resolution: 800x480
- Display Area: 154.08 (W) × 85.92 (H) mm
- Panel Type: IPS
- Contrast Ratio: 800:1 (typical)
- Brightness: 400 cd/m²
- Viewing Angle: L/R 170 degrees (85/85), U/D 160 degrees (70/90)
- Backlight Life: 50,000 hours (LED)
- Input Voltage: DC 12V (2000mA) nominal, supports wide voltage 6V-24V (600mA)
- AC Input: 110V-220V
- Operating Temperature: -10°C to 60°C (14°F to 140°F)
- Storage Temperature: -20°C to 80°C (-4°F to 176°F)
- Humidity: (10-90)% operating, (5-90)% storage (non-condensing)
- HDMI Input Support:
- 720*480i & 720*480p @59.94, 60Hz
- 720*576i & 720*576p @50Hz
- 1280*720P @ 50, 59.94, 60Hz
- 1920*1080i @ 50, 59.94, 60Hz
- 1920*1080psf @ 24, 25, 29.97, 30Hz
- 1920*1080psf @ 23.93, 24, 25, 29.97, 30, 50, 59.94, 60Hz
- AV Composite Video Format: NTSC / PAL / Auto
- Mounting Thread: 1/4"-20
7.2 11-inch Magic Arm Specifications
- Material: Aluminum Alloy
- Maximum Length: 11 inches (approx. 28 cm)
- Mounting: 1/4"-20 screw on both ends, hot shoe mount adapter included
7.3 Cleaning Kit Components
- 1x Lens Brush
- 2x Microfiber Cleaning Cloths
8. Warranty and Support
Neewer products are designed for reliability and performance. For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Neewer customer support through their official website or the retailer where you purchased the product. Please retain your proof of purchase for warranty claims.