1. Introduction
This manual provides essential instructions for the safe and effective use of your PWR+ 12V DC Power Cord 25121. This replacement power cord is designed for specific Igloo thermoelectric coolers, enabling operation from a vehicle's 12V DC power outlet. Please read this manual thoroughly before use.
2. Product Overview
2.1 Key Features
- Length: Extra-long 6.5 ft (78 inches) power cord for extended reach.
- Power Source: Designed for 12V DC outlets (car, air, boat).
- Safety: Manufactured with high-quality materials, including safeguards against incorrect voltage, short circuits, and internal overheating. CE/FCC/RoHS certified.
- Durability: Features reinforced stress points for enhanced longevity.
2.2 Compatibility
This power cord is compatible with the following Igloo thermoelectric cooler models:
- Igloo Cool Chill
- Igloo Kool Mate
- Igloo Iceless TE Cooler
Important: Please verify the plug type on your cooler matches the 2-pin B-shape connector shown in the product images to ensure compatibility. Incompatible plugs may cause damage or prevent proper function.
Figure 2.1: The PWR+ 12V DC Power Cord, featuring a car adapter and a 2-pin B-shape cooler plug.
Figure 2.2: Visual guide for plug compatibility. Ensure your cooler's port matches the correct 2-pin B-shape plug shown.
3. Setup
- Inspect the Cord: Before first use, visually inspect the power cord for any signs of damage, such as cuts, frayed wires, or bent pins. Do not use if damaged.
- Connect to Cooler: Locate the 12V DC input port on your compatible Igloo cooler. Align the 2-pin B-shape connector of the PWR+ cord with the cooler's port and firmly insert it. Ensure a secure connection.
- Connect to Vehicle: Insert the car adapter end of the power cord into your vehicle's 12V DC accessory outlet (cigarette lighter socket). Push firmly until it is fully seated.
Video 3.1: Demonstrates connecting the 12V DC power cord to an Igloo cooler and a vehicle's power outlet.
4. Operation
Once the power cord is securely connected to both your Igloo cooler and the vehicle's 12V DC outlet, your cooler should begin to operate. Most Igloo thermoelectric coolers have a switch for 'Cool' or 'Warm' settings. Refer to your specific cooler's manual for detailed operating instructions regarding temperature settings.
- Ensure your vehicle's engine is running or the accessory power is active to provide continuous power to the cooler.
- Avoid leaving the cooler connected to the vehicle's battery for extended periods without the engine running, as this may drain the battery.
Video 4.1: Illustrates the connection and initial operation of a 12V car cooler plug.
5. Maintenance
- Cleaning: Keep the power cord and connectors clean and free from dust, dirt, or moisture. Use a dry, soft cloth for cleaning.
- Storage: When not in use, coil the cord neatly and secure it with the reusable cable tie. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Fuse Check: The car adapter contains a replaceable fuse (F15AL 6x30mm Fuse) for protection. If the cooler stops receiving power, check and replace the fuse if necessary. Always use a fuse with the correct rating.
- Avoid Stress: Do not bend the cord sharply or place heavy objects on it, especially near the connectors, to prevent internal wire damage.
Video 5.1: Highlights the extra-long and durable construction of the PWR+ cord, including reinforced stress points.
6. Troubleshooting
- Cooler Not Powering On:
- Ensure both ends of the power cord are securely connected.
- Verify the vehicle's 12V DC outlet is functioning (test with another device if possible).
- Check the fuse within the car adapter. Replace if blown (refer to Maintenance section).
- Confirm your Igloo cooler is switched on and set to the desired mode (Cool/Warm).
- Loose Connection: If the connection feels loose, ensure the car adapter is fully inserted into the vehicle's outlet. The 2-pin cooler plug should also be firmly seated.
- Overheating: If the cord or adapter feels excessively hot, disconnect it immediately. This could indicate an issue with the cooler, the vehicle's outlet, or the cord itself. Discontinue use and contact support.
Video 6.1: Provides a close-up view of a similar 12V DC power cable, useful for identifying components during troubleshooting.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | PWR+ |
| Model Name | PF15C12V |
| Connector Type | 25121 (2-pin B-shape) |
| Cable Type | DC Power |
| Compatible Devices | Igloo Cool Chill, Igloo Kool Mate, Igloo Iceless TE Cooler |
| Special Feature | Travel |
| Color | Black |
| Number of Pins | 2 |
| Wattage | 45 watts |
| Maximum Voltage | 12 Volts (DC) |
| Item Length | 78 Inches (6.5 Feet) |
| Item Weight | 0.13 Kilograms (4.7 ounces) |
| Certifications | CE, FCC, RoHS |
| Indoor/Outdoor Usage | Outdoor |
8. Warranty and Support
PWR+ products are designed for reliability and performance. This product comes with the following warranty:
- Refund Policy: 30 Days Refund
- Exchange Policy: 24 Months Exchange
For technical support, warranty claims, or any questions regarding your PWR+ product, please contact PWR+ customer support. Contact information can typically be found on the PWR+ official website or through your purchase platform.
